Header

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Click

This action clicks the specified object.

This action does not have any parameter.

Example

Click

ClickAction

This action clicks the specified object from the web application under test.

This action does not have any parameter.

Note: ActionClick uses underlying selenium WebDriver "Action" class to perform click action. Qualitia recommends using this action for web applications.

Example:
ClickAction

ClickAt

This action clicks at the specified point on the object.
Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

X

The x-coordinate of the click.

No

String

Y

The y-coordinate of the click.

No

String

Example

ClickAt        "5"            "10"

ClickJS

This action clicks the specified object from the web application under test.

This action does not have any parameter.

Note: ClickJS uses javascript code to perform the click action. Qualitia recommends using this action for web applications.
Example:
ClickJS

ClickJSAndSelectWindowUsingURL

This action is used to click the web element or object that opens single or multiple windows from which a specific window is selected.
This action accepts 'waitTimeForWindow' for the specific window to open.

This action is used in the following 2 scenarios:

  • When a single window opens after clicking the web element/object, you need to give only 'waitTimeForWindow' parameter. 
  • When multiple windows open after clicking the web element or object, then you can provide the exact URL or regex patterned URL  window. You must give the URL and 'isURLPatternString' parameters.
    Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

waitTimeForWindow

Enter the wait time for the window to open.

Yes

String

URL

Enter a specific URL or regex pattern of URL for the window you want to select.

NoString
isURLPatternString

Enter one of the following:

  • True: If you want to apply the regex pattern to URL.
  • False: If you do not want to apply the regex pattern to URL.
NoString

Example 1

String waitTimeForWindow : "5",

String url : null(do not give any value)

String isURLPatternString : null(do not give any value)

Expected Result - Here you do not need to provide URL or isURLPatternString as after clicking the object or element opens. The action waits up to 5 seconds for the window to appear after clicking the web element or object and then select the window.

Example 2

String waitTimeForWindow - "5",

String url - "https://bflsme--preprod.cs57.my.salesforce.com/_ui/common/data/LookupPage?                                                             lkfm=editPage&lknm=cas3&lktp=003&lksrch=",

String isURLPatternString - "False",

The action waits for up to 5 seconds for multiple windows to appear after clicking web element or object and it selects the window with the url "https://bflsme--preprod.cs57.my.salesforce.com/_ui/common/data/LookupPage?lkfm=editPage&lknm=cas3&lktp=003&lksrch=". As the isURLPatternString parameter is 'false' , the action finds as per the given URL.  

Example 3

String waitTimeForWindow - "5",

String url - "www.([A-Z])\w+",

String isURLPatternString - "True",

Expected Result - The action waits for up to 5 seconds for multiple windows to open after clicking web element/object and it selects the window which matches the regex pattern  "www.([A-Z])\w+" as provided in the URL parameter. As the isURLPatternString parameter is 'True', the action treats the URL parameter as a regex pattern. In case there are multiple windows satisfying the regex pattern, the action selects the first window.


DoubleClick

This action double-clicks the specified web element.

This action does not have any parameter.

Example:

DoubleClick

MouseOver

This action simulates a mouse hovering over the specified object.

This action does not have any parameter. 

Example:

MouseOver

MouseUp

This action simulates the event that occurs when the user releases the mouse button.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

X

The x-coordinate of the click.

No

String

Y

The y-coordinate of the click.

No

String

Example

MouseUp         "5"          "10"

StoreText

RightClick

This action right-clicks the specified web element.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

option

The context menu option number that needs to be clicked.

No

String

Example:

RightClick             "3''

This will select the third option from the context-menu.

ScrollIntoView

This action scrolls to view the specified object. 

This action does not have any parameter. 

Example:

ScrollIntoView

SelectFrame

This action selects a frame within the current window.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

locator

Enter the locator using which you want to select the frame. This parameter can have the values of the frame's: ID, Name, Xpath, CSS.

Yes

String

locatorType

Enter which locator type you want to use. It can be ID, Name, xpath, CSS and so on. In order to come out of all the frames, the parameters passed should be empty.

Yes

String

Example:

SelectFrame                        "mainFrame"               "name"

SelectFrameWhenAvailable

This action waits until the specified frame appears on the page and selects when the frame appears. You may specify the timeout and polling interval if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the frame to appear.  

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the existence of the frame before exhausting timeout. 

No

String

keyFrameAvailable

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

SelectFrameWhenAvailable        "20"             "500"          "Key"          "Defect"


Macro lookup error: excerpt "SendKeySequence" was not found on page "WebEdit Actions" (with ID 34268028239) in space "QASNew".

If you're experiencing issues please see our Troubleshooting Guide.

SetFocus

This action sets the focus on the specified object.

This action does not have any parameter. 

Example:

SetFocus

SetValueAttribute

This action sets the data specified in the 'value' attribute of the object.

Parameter Name

Parameter Description

Mandatory

Data Type

value

Enter the value to be added for the Value attribute.

Yes

String

Example:

SetValueAttribute           "#ff0990"

StoreChildCount

This action stores the child count of the specified object under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Key

Enter the key name under which the child count will be saved.

Yes

String

Example:

StoreChildCount                               "Key"

StoreCSSProperty

This action stores the CSS property value of the object under the specified key. Key value can be retrieved using the key name. 

Input Parameters:

Parameter Name

Parameter Desciption

Mandatory

Data Type

keyProperty

Enter the key name under which the property value will be stored. 

Yes

String

property


Enter the property name whose value you want to store.YesString

Example:

StoreCSSProperty     "display"      "Key"        

StoreExistence

This action stores existence of the object under the specified key. The key value can be retrieved using the key name. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Key

Enter the key name under which the existence's Boolean value will be stored. 

  • Stores True if the object exists.
  • Stores False if the object does not exist.

Yes

String

Example:

StoreExistence                               "Key"

StoreLocation

This action stores the current location of the object under the specified keys. The key values can be retrieved using the key names. 

Input Parameters:

Parameter Name

Parameter Desciption

Mandatory

Data Type

keyXPosition

Enter the key name to store the height of the location of the object.

Yes

String

keyYPosition

Enter the key name to store the width of the location of the object.

Yes

String


Example:

StoreLocation        "Height"            "Width"

StorePropertyValue

This action stores the property of the specified object under the key name. The stored key value can be retrieved using the key name.
Some Android and iOS properties are not accessible.

List of accessible properties for Android: "name", "contentDescription", "className", "resourceId", "text", "enabled", "checkable", "checked", "clickable", "focusable", "focused", "longClickable", "scrollable", "selected", "displayed"

List of accessible properties for iOS: "name", "value", "label", "hint"

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Key

Enter the key name under which the property value will be stored.

Yes

 String

Property

Property/attribute name whose value needs to be stored under the specified key. This can be any accessible property of Android/iOS native object mentioned above.

Yes

 String

Example:

StorePropertyValue                            "key"                     "text"

StoreSize

This action stores the size of the specified object under keys. The key values can be retrieved using key names.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

keyXPosition

Enter the key name under which you want to store the height of the object.

Yes

String

keyYPosition

Enter the key name under which you want to store the width of the object.

Yes

String

Example:

StoreSize           "Height"                   "Width"

StoreText

This action stores the text existing inside the specified object under the specified keys. The key values can be retrieved using the key names. 

Input Parameters:

Parameter Name

Parameter Desciption

Mandatory

Data Type

keyText

Enter the key name to store the text from the specified object.

Yes

String

Example:

StoreText        "Key" 

StoreValueAttribute

This action stores the data present in the "value" attribute of the object.

Parameter Name

Parameter Description

Mandatory

Data Type

strKey

Enter a variable to store the data present in the "value" attribute for the object.

Yes

String

Example:
StoreValueAttribute        "Key"

VerifyEnability

This action verifies the enability of the specified object. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

enability

Value for this parameter can be True or False.

  • Set True if you want to verify that the object is enabled. 
  • Set False if you want to verify that the object is disabled.
    Note: If you do not enter any value, the default value is set to True during the test case execution.

No

String

Example:

VerifyEnability                          "True"

VerifyExistence

This action verifies the existence of the specified object. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

existence

Value for this parameter can be True or False.

  • Set True if you want to check the existence.
  • Set False if you want to check the non-existence.
    Note: If you do not enter any value, the default value is set to True during the test case execution.

No

String

Example:

VerifyExistence                      "True"

VerifyVisibility

This action verifies the visibility of the specified object.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

visibility

Value for this parameter can be True or False.

  • Set True if you want to check the visibility.
  • Set False if you want to check the invisibility.
    Note: If you do not enter any value, the default value is set to True during the test case execution.

No

String

Example:

VerifyVisibility                      "True"

StoreVisibility 

This action stores the visibility status for a web element under the specified key name in the following conditions:

  • True: If the web element is visible.
  • False: If the web element is not visible.


Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

strKey

Enter a variable to store the visibility status.No

String

Example: StoreVisibility   "Key"

Wait Actions

WaitForAttributeContains

This action waits till the value of the specified attribute changes to the expected partial value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.  

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

attributeName

Enter the attribute name whose value you want to check.

Yes

String

attributeValue 

Enter the partial expected partial attribute value.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the expected value. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout. 

No

String

keyAttributeValueContains

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForAttributeContains      "id"           "we323es"        "5"          "500"     "Key"       "Defect"

WaitForAttributeNotContains

This action waits until the specified attribute's value of the object changes to other than the partial parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.   

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

attributeName

Enter the attribute name whose value you want to check.

Yes

String

attributeValue 

Enter the value which should not be there in the attribute value.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the value to change. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for existence of the unexpected value before exhausting timeout.

No

String

keyAttributeValue

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForAttributeNotContains      "id"           "232waf"        "5"          "500"     "Key"       "Defect"

WaitForAttributeNotToBe

This action waits until the specified attribute's value of the object changes to other than the exact parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.  

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

attributeName

Enter the attribute name whose value you want to check.

Yes

String

attributeValue 

Enter the value which should not be there in the attribute value.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the value to change. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout. 

No

String

keyAttributeValueNotToBe

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForAttributeNotToBe      "id"           "232waf"        "5"          "500"     "Key"       "Defect"

WaitForAttributeNotToBeEmpty

This action waits until the specified attribute's value of the object gets filled with some value. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

attributeName

Enter the attribute name whose value you want to check.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the attribute value.  

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the attribute value before exhausting timeout. 

No

String

keyAttributeValue

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForAttributeNotToBeEmpty      "id"           "5"          "500"     "Key"       "Defect"

WaitForAttributeToBe

This action waits till the value of the specified attribute changes to the exact expected value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.   

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

attributeName

Enter the attribute name whose value you want to check.

Yes

String

attributeValue 

Enter the exact expected value.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the expected value. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout. 

No

String

keyAttributeValue

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForAttributeToBe         "id"           "232waf"        "5"          "500"     "Key"       "Defect"

WaitForAttributeToBeEmpty

This action waits until the specified attribute's value of the object gets empty. You may specify the timeout and polling interval, if required.  

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

attributeName

Enter the attribute name whose value you want to check.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the attribute value to be empty.  

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the attribute value before exhausting timeout. 

No

String

keyAttributeValue

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForAttributeToBeEmpty      "id"           "5"          "500"     "Key"       "Defect"

WaitForChildElement

This action waits for the child elements of the specified object to appear. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

childLocatorType

Enter the locator type of the object whose child you want to check.

Yes

String

childLocatorValue

Enter the locator value of the child you want to check. 

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the elements to appear. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. 

No

String

keyExistence

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForChildElement      "id"       "2"         "5"          "500"     "Key"       "Defect"

WaitForClickability

This action waits for the specified object to be clickable. You may specify the timeout and polling interval, if required.  

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the object to be clickable.   

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the object clickability before exhausting timeout. 

No

String

keyClickability

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForClickability     "5"          "500"     "Key"       "Defect"

WaitForExistence

This action waits for the existence of the specified object. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the existence of the object.   

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the existence of the object before exhausting timeout. 

No

String

keyExistence

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForExistence     "5"          "500"     "Key"       "Defect"

WaitForInnerTextContains

This action waits for the object to contain the expected partial text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

innerText

Enter the expected text you want to wait for.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the expected text.   

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. 

No

String

keyInnerTextContains

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForInnerTextContains          "Connect"       "5"       "500"     "Key"       "Defect"

WaitForInnerTextMatchesPattern

This action waits for inner text from the specified object to match the expected text regular expression pattern. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

innerTextRegXPattern

Enter the expected pattern for the inner text. Pattern should be regular expression. Step fails in case the pattern is invalid.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the expected text.   

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. 

No

String

keyInnerText

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForInnerTextMatchesPattern           ".[My]text."       "5"       "500"     "Key"       "Defect"

WaitForInnerTextNotContains

This action waits until the specified attribute's value of the object changes to other than the parameterized value. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

innerText

Enter the text which should not be there in the attribute value. 

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the inner text to disappear.    

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the expected text to be disappeared before exhausting timeout. 

No

String

keyInnerTextNotContains

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForInnerTextNotContains          "Connect"       "5"       "500"     "Key"       "Defect"

WaitForInnerTextNotToBe

This action waits till the inner text of the object changes from the specified text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

innerText

Enter the text which should not be there in the object.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the text to change.   

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. 

No

String

keyInnerTextNotToBe

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForInnerTextNotToBe          "Connect"       "5"       "500"     "Key"       "Defect"

WaitForInnerTextToBe

This action waits for the object to contain the expected exact text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

innerText

Enter the expected text you want to wait for.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the expected text.   

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. 

No

String

keyInnerText

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForInnerTextToBe          "Connect"       "5"       "500"     "Key"       "Defect"

WaitForInvisibility

This action waits for the object to invisible. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the object to go invisible.    

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the invisibility before exhausting timeout. 

No

String

keyInvisibility

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForInvisibility     "5"          "500"     "Key"       "Defect"

WaitForNonClickability

This object waits for the object to become non clickable. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the object to become non clickable.     

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the clickability before exhausting timeout. 

No

String

keyNonClickability

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForNonClickability      "5"          "500"     "Key"       "Defect"

WaitForNonExistence

This action waits for the non existence of the specified object. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the non existence of the object.   

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for non existence of the object before exhausting timeout. 

No

String

keyNonExistence

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForNonExistence     "5"          "500"     "Key"       "Defect"

WaitForNumberOfElementsToBe

This action waits for the number of elements of the specified object locator on the page to be same as the expected number. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

expectedNumOfElements

Enter the expected number of elements to wait for.

Note: The default value is 1.

No

String

timeOut

Enter the timeout (in seconds) to wait for the number elements to appear. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. 

No

String

keyNumberOfElements

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForNumberOfElementsToBe       "2"         "5"          "500"     "Key"       "Defect"

WaitForNumberOfElementsToBeLessThan

This action waits for the number of elements of the specified object locator on the page to be less than the specified number. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

expectedNumOfElements

Enter the expected number of elements to wait for.

No

String

timeOut

Enter the timeout (in seconds) to wait for the number elements to appear. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. 

No

Integer

keyNumOfElementsLessThan

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForNumberOfElementsToBeLessThan       "2"         "5"          "500"     "Key"       "Defect"

WaitForNumberOfElementsToBeMoreThan

This action waits for the number of elements of the specified object locator on the page to be more than the specified number. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

expectedNumOfElements

Enter the expected number of elements to wait for.

No

Integer

timeOut

Enter the timeout (in seconds) to wait for the number elements to appear. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. 

No

String

keyNumOfElementsLessThan

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForNumberOfElementsToBeMoreThan       "2"         "5"          "500"     "Key"       "Defect"

WaitForStaleness

This action waits until the element gets detached from the DOM. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the value to be detached.  

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for existence of the element before exhausting timeout. 

No

String

keyStatus

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForStaleness        "5"          "500"     "Key"       "Defect"

WaitForVisibility

This action waits for the object to be visible. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the object visibility.    

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. 

No

String

keyVisibility

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String


Example:

WaitForVisibility     "5"          "500"     "Key"       "Defect"

ClickAndWait (Deprecated)

This action clicks the specified object and waits for the seconds specified in Sync Time under the Configuration Settings (Execution) window.

Default value is 20 seconds. If the page loads before reaching the maximum sync time execution continues to the next steps. 

This action does not have any parameter. 

Example:

ClickAndWait

Webdriver waits for the document to come in ready state. If it is in ready state it is assumed that the page is loaded completely and Webdriver stops waiting. The condition to wait till the document to load in ready state and assume that the page is loaded could however not work as expected at all times.

WaitForObject (Deprecated)

This action waits for the object to appear or disappear for the maximum number of seconds specified.

If the object is found or not found before the maximum time specified, execution continues to the next steps.

If the wait time is "" then the wait time shall be the "Sync Time" set under the associated execution profile.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Timeout

Enter the number of seconds to wait for the object to appear or disappear. This has to be 0 or any positive number.

No

String

existence

Value for this parameter can be True or False.

  • Set True if you want to check for the appearance of the object.
  • Set False if you want to check for the disappearance of the object.

No

String

Example:

WaitForObject           "10"            "True"

The action waits for maximum 10 seconds for the object to appear. If the object appears before 10 seconds elapses, the execution continues to the next steps.

WaitForObject         "15"          "False"

The action shall wait for maximum 15 seconds for the object to disappear. If the object disappears before 15 seconds elapses, the execution continues to the next steps.


  • No labels

Footer