Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 63 Next »

This page contains actions that are specific to automate Desktop applications. Also, you can use all the actions defined for General Web Actions.

On this page:

OpenFirefoxBrowser

This action opens a new blank Mozilla Firefox browser.

This action does not have any input parameter.

Example:

OpenFirefoxBrowser

OpenIEBrowser

This action opens a new blank IE browser.

This action does not have any input parameter.

Example:

OpenIEBrowser

CloseAllOpenedFirefoxBrowsers

This action closes all open Firefox browsers on the desktop.

This action does not have any parameters.

Example:

CloseAllOpenedFirefoxBrowsers

CloseAllOpenedIEBrowsers

This action closes all open IE browsers on the desktop.

This action does not have any parameters.

Example:

CloseAllOpenedIEBrowsers


OpenURL

This action opens the specified URL. Qualitia user can specify the browser and browser version in the parameters section to be used when opening URL.

  • Ensure that you have enabled UFT on your execution browsers (IE, Firefox, and Google Chrome).
  • Ensure the browser version installed on your execution device is compatible with UFT.

Input Parameters:

Parameter Name

Parameter Description

MandatoryData Type

Browser Type

Enter the browser name in which you want to open the URL.

Parameters can be as follows:

  • IE: This will open URL in Internet Explorer.
  • Firefox: This will open URL in Mozilla Firefox.
  • Chrome: This will open URL in Google Chrome.
YesString

URL

Enter the URL to be opened.

YesString

Browser version

Enter the major and minor version of the browser installed on testing machine. For example, if browser version is 54.9.0.3323, then enter only 54.9.

NoString

Path

This parameter is applicable only when using Google Chrome browser.

Enter the absolute path of the chrome.exe from the Google Chrome installed location.

No


String

Example:

OpenURL             “Chrome”  “http://www.google.com”     “53.8”   “C:\Program Files\Google\Chrome\Application\chrome.exe”

When using this action, Qualitia defines its own set of system variables which can be used later when executing test cases. These variables are stored in Qualitia with their expressions (TRUE or FALSE). Following is the list of system variables that Qualitia stores when executing the OpenURL action.

  • $$_ISIE: If browser type is set as IE (Internet Explorer), then this expression is stored as TRUE. Here, other two ($$_ISFIREFOX and $$_ISCHROME) are stored as FALSE.
  • $$_ISFIREFOX: If browser type is set as FIREFOX (Mozilla Firefox), then this expression is stored as TRUE. Here, other two ($$_ISIE and $$_ISCHROME) are stored as FALSE.
  • $$_ISCHROME: If browser type is set as CHROME (Google Chrome), then this expression is stored as TRUE. Here, other two ($$_ISFIREFOX and $$_IE) are stored as FALSE.

Note: It is recommended to close all the unnecessary browsers before starting the test execution or object spying using UFT.

CloseApplication

This action closes the specified application.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Processname

Process Name of the application that is to be closed.

Yes

String

Example:
CloseApplication             "notepad.exe"

ExecuteDDLQueryAndStoreInFile

This action executes data definition queries like select and stores the result set of the fired query. The result set is stored in a CSV file. The action supports and is tested for database Oracle 10g.

Before using this action, ensure that the required database and database drivers are installed. Below is basic information on the oracle drivers and connection with Vbscript.

Oracle10g:

For interacting with the database you would need a driver that is supported in VbScript to interact with Oracle 10 g. One of the drivers can be as follow. The driver would need to be installed before interacting with the database.

  • Driver - "Oracle in OraDb10g_home1".
    You would need to know the following details as well.
  • Database  Name- is the oracle database to which the user wishes to connect.
  • User ID – The username to connect to the database
  • Password - The password to connect to the database

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

driver

The driver for the database

Yes

String

dB

The database name on which the query will be fired

Yes

String

username

The user name to connect to the database

Yes

String

password

The password to connect to the database

Yes

String

query

The query that needs to be executed. This keyword is design such that it can store result set. Hence this keyword is beneficial for SQL queries that can return result set

Yes

String

filename

The complete path of the file in which the results of the database query is to be stored

Yes

String

Example:
ExecuteDDLQueryAndStoreInFile                    "Oracle in OraDb10g_home1"       "ORCL"        "system"          "admin"             "Select * from sales_master where id=100" "{Key_SQL13_InwardRegisterControl_ActData_FilePath}"

ExecuteDMLQueryAndStoreInKey

This action executes data manipulation queries like update, delete, and stores the result into a key. This action supports and is tested for database Oracle 10g.

Before using this action, ensure that the required database and database drivers are installed. Below is basic information on the oracle drivers and connection with Vbscript.

Oracle10g:

For interacting with the database you would need a driver that is supported in VbScript to interact with Oracle 10 g. One of the drivers can be as follow. The driver would need to be installed before interacting with the database.

  • Driver - "Oracle in OraDb10g_home1".
    You would need to know the following details as well.
  • Database  Name- is the oracle database to which the user wishes to connect.
  • User ID – The username to connect to the database
  • Password - The password to connect to the database

Input Parameters

Parameter Name

Parameter Description

Mandatory

Data Type

driverString

The driver for the database

Yes

String

url

The connection string to connect to the database, basically the server address

Yes

String

username

The user name to connect to the database

Yes

String

password

The password to connect to the database

Yes

String

query

The dml query that needs to be executed

Yes

String 

key

The key in which the result of the database query need to be stored

Yes

String

Example:

ExecuteDMLQueryAndStoreInKey              "Microsoft ODBC for Oracle"       "Server=localhost"      "system"       "admin"        "Update * from sales_master where id=100" "{Key_Status}"

CalculateDifferenceInDateAndStore

This action stores the difference between two specified dates under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

strKey

The key in which the difference will be stored.

Yes

String

interval

It is the expression that you want to use to calculate the differences between from date and to date. Please refer to the Interval section below for more examples of it.

Yes

String

fromDate

Enter the date from.

Yes

Integer

toDate

Enter the date to.

Yes

Integer

(info) Interval: The interval parameter can have the following values:

Parameter

Description

YYYY

Year

Q

Quarter

M

Month

Y

Day of year

D

Day

W

Weekday

WW

Week of year

H

Hour

N

Minute

S

seconds

Example:
CalculateDifferenceInDateAndStore      "Key"            "D"        "12-Dec-2016"      "12-Dec-2027"

NavigateFireFoxBrowser

This action opens the specified URL in the Mozilla Firefox browser. If there is any blank firefox browser on the desktop, uses the same browser, otherwise Qualitia opens a new blank browser and navigates to the URL.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

strURL

Enter the URL to open.

Yes

String

Example:

NavigateFireFoxBrowser                 "http://www.google.com"

NavigateIEBrowser

This action opens the specified URL in the Internet Explorer (IE) browser.  If there is any blank IE browser on the desktop, uses the same browser, otherwise Qualitia opens a new blank browser and navigates to the URL.

This browser can be used in conjunction with OpenIEBrowser action.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

strURL

Enter the URL to open.

Yes

String

Example:

NavigateIEBrowser                 "http://www.google.com"

OpenApplication

This action opens the application with specified path.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

strPath

Enter the absolute path of the application to be opened.

Yes

String

Example:

OpenApplication "C:\WINDOWS\system32\notepad.exe"

PressKeys

This action sends one or more keystrokes to the active window (as if typed on the keyboard).

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

strKey

Enter the key which you want to press from the key board. 

Yes

String

Example:

You can use PressKeys action to open the Find dialog on the browser, which is done manually using Ctrl + F.  While using the PressKeys action, the data to be passed is ~^F where ^ means Control. See the list below for the keys and their meaning).

The action returns 0, if the key is pressed successfully else it will return 1 in any other case. 

Note: If a PressKeys action does not execute on an Inactive Screen, refer to PressKeys Action does not Execute on an Inactive Screen.

Important Note:

The data to be passed here is only ^F. However ^ has a special meaning in QAS, it must be preceded with an escape sequence ~. Hence the data passed is written as ~^F.
Make sure to prefix an escape sequence which is a tilda for the following characters which has a special meaning in Qualitia. The characters are {,}, ^, ~
Example:

  1. If key to be sent is {F1}, enter data as ~{F1~}.
  2. To send {TAB}, enter data as ~{TAB~}.
  3. To send {ENTER}, enter data as ~{ENTER~}.

Use the PressKeys action to send keystrokes to applications that have no automation interface. Most keyboard characters are represented by a single keystroke. Some keyboard characters are made up of combinations of keystrokes (CTRL+SHIFT+HOME, for example). To send a single keyboard character, send the character itself as the string argument. For example, to send the letter x, send the string argument "x".


You can use PressKeys to send more than one keystroke at a time. To do this, create a compound string argument that represents a sequence of keystrokes by appending each keystroke in the sequence to the one before it. For example, to send the keystrokes a, b, and c, you need to send as "abc". The PressKeys method uses some characters as modifiers of characters (instead of using their face-values). This set of special characters consists of parentheses, brackets, braces, and the:

  • plus sign       "+",
  • caret             "^", (use with an escape character [~])
  • percent sign "%",
  • and tilde       "~"

Enter these characters by enclosing them within braces "{}". For example, to enter the plus sign, enter the string argument "{+}". Brackets "[ ]" have no special meaning when used with PressKeys, but you must enclose them within braces to accommodate applications that do give them a special meaning.

  • To send bracket characters, enter the string argument "{[}" for the left bracket and "{]}" for the right one.
  • To send brace characters, enter the string argument "}" for the left brace and "{" for the right one.
  • To send a key combination that includes Ctrl key such as Ctrl + N send "~^n"

Some keystrokes do not generate characters (such as ENTER and TAB). Some keystrokes represent actions (such as BACKSPACE and BREAK). To send these kinds of keystrokes, enter the associated arguments as shown in the following table:

Key

Argument

BACKSPACE

~{BACKSPACE~}, ~{BS~}, or ~{BKSP~}

BREAK

~{BREAK~}

CAPS LOCK

 ~{CAPSLOCK~}

DEL or DELETE

~{DELETE} or ~{DEL~}

DOWN ARROW

~{DOWN~}

END

~{END~}

ENTER

~{ENTER~} or ~

ESC

~{ESC~}

HELP

~{HELP~}

HOME

~{HOME~}

INS or INSERT

~{INSERT~} or ~{INS~}

LEFT ARROW

~{LEFT~}

NUM LOCK

~{NUMLOCK~}

PAGE DOWN

~{PGDN~}

PAGE UP

~{PGUP~}

PRINT SCREEN

~{PRTSC~}

RIGHT ARROW

~{RIGHT~}

SCROLL LOCK

~{SCROLLLOCK~}

TAB

~{TAB~}

UP ARROW

~{UP~}

F1

~{F1~}

F2

~{F2~}

F3

~{F3~}

F4

~{F4~}

F5

~{F5~}

F6

~{F6~}

F7

~{F7~}

F8

~{F8~}

F9

~{F9~}

F10

~{F10~}

F11

~{F11~}

F12

~{F12~}

F13

~{F13~}

F14

~{F14~}

F15

~{F15~}

F16

~{F16~}

To send keyboard characters that are comprised of a regular keystroke in combination with a SHIFT, CTRL, or ALT, create a compound string argument that represents the keystroke combination. You can do it by preceding the regular keystroke with one or more of the following special characters:

Key
Arguments
Shift~+
Ctrl~^
Alt~%

(info) When used this way, these special characters are not enclosed within a set of braces.

To specify that a combination of SHIFT, CTRL, and ALT should be held down while several other keys are pressed, create a compound string argument with the modified keystrokes enclosed in parentheses. For example, to send the keystroke combination that specifies that the SHIFT key is held down while:

  • e and c are pressed, enter the string argument "+(ec)".
  • e is pressed, followed by a lone c (with no SHIFT), enter the string argument "+ec".

You can use the PressKeys action to send a pattern of keystrokes that consists of a single keystroke pressed several times in a row. To do this, create a compound string argument that specifies the keystroke you want to repeat, followed by the number of times you want it repeated. To do this, use a compound string argument of the form {keystroke number}. For example, to send the letter "x" ten times, you would send the string argument "~{x 10~}" where you need to ensure that you enter a space between keystroke and number.


  • The only keystroke pattern you can send is the kind that is comprised of a single keystroke pressed several times. For example, you can send "x" ten times, but you cannot do the same for "Ctrl+x".
  • You cannot automate the PRINT SCREEN key ~{PRTSC~} to an application.
  • To send a space, enter the string "


SAPAutoLogon

This action connects and logs on to the designated SAP server.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

ServerDescription

Enter the server details that need to be connected.

Yes

String

Client

Enter the client details that need to be connected.

Yes

String

User

Enter the User name to use when connecting to the server.

Yes

String

Password

Enter the password to use when connecting to the server.

Yes

String

Language

Enter the 2-digit code to select the language.

Yes

String


Example:

SAPAutoLogon                      "Calderone"         "4700"       "Qualitia"        "Password"       "EN"

SAPAutoLogonByIP

This action connects and logs on to an SAP server according to its IP address.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

ConnectionString

Enter the connection string that needs to be connected.

Yes

String

Client

Enter the client details that need to be connected.

Yes

String

User

Enter the User name to use when connecting to the server.

Yes

String

Password

Enter the password to use when connecting to the server.

Yes

String

Language

Enter the 2-digit code to select the language.

Yes

String


Example:

SAPAutoLogonbyIP               "/F/123.132.75.5/S/3200"        "4700"              "Qualitia"          "Password"        "EN"

SAPAutoLogonByTargetSystem

This action connects and logs on to an SAP server according to specified target system.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

TargetSystem

Enter the target system that needs to be connected.

Yes

String

Client

Enter the client details that need to be connected.

Yes

String

User

Enter the User name to use when connecting to the server.

Yes

String

Password

Enter the password to use when connecting to the server.

Yes

String

Language

Enter the 2-digit code to select the language.

Yes

String


Example:

SAPAutoLogonbyIP            "C5P"            "3200"          "4700"       "Qualitia"        "Password"       "EN"

SAPCloseConnections

This action closes all the existing connections that are open currently.

This action does not have any input parameters.

Example:
SAPCloseConnections

SAPOpenConnection

This action opens the connection to the specified SAP server.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

ServerDescription

Enter the server description that needs to be connected.

Yes

String

Example:

OpenConnection            "Calderone"

SAPOpenConnectionByIP

This action opens a connection to the specified SAP server according to its IP address.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

ConnectionString

Enter the connection string that needs to be connected.

Yes

String


Example:
OpenConnectionByIP                "/F/123.132.75.5/S/3200"

SAPOpenConnectionByTargetSystem

This action opens a connection to the specified SAP server according to its target system.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

TargetSystem

Enter the target system that needs to be connected.

Yes

String


Example:
OpenConnectionByIP          "C5P"

SAPStartBPCATracing

This action begins running the Business Process Change Analyzer to detect changes in a transaction's objects (as compared to the TBOM).

This action does not have any input parameters.

Example:

SAPStartBPCATracing

SAPStopBPCATracing

This action stops the Business Process Change Analyzer.

This action does not have any input parameters.

Example:

SAPStopBPCATracing

StoreObjectInstanceCount

It stores the total number of children of desktop class for the given set of arguments in a given key. Argument key and value should be separated by '=' and multiple key/val pair should be separated by a comma ','.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

ObjectDescription

Specification/property of the object whose instance count is to be stored.
A general format is :"key1=value1,key2=value2,key3=value3"

Yes

String

Key

The key in which count is to be stored.

Yes

string

Example:
StoreObjectInstanceCount                 "Class Name=JavaWindow,title=LibrarySystem"             "MyObjInstanceCountKey"

StoreSplitString

This action splits the string based on the delimiter specified by the user. Any of the split items can be stored, the particular item that is to be stored the user should provide the index of that item.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

key

The variable in which the specified indexed item of the split string is to be stored

Yes

String

mainString

The string which is to be split

No

String

delimiter

The delimiter to be used for splitting

Yes

String

instance

The index of the item which is to be store after splitting

 No

String

Example:

StoreSplitString             "StoreItem"          "This is ; a sample ; String"            ";"               "2 "

StoreSubString 

This action stores a substring of a string into a variable. The key value can be retrieved using the key name. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

key

The variable in which the sub-string is to be stored.

Yes

String

sourceString

Enter the string whose sub-string value is to be stored.

No

String

startIndex

Enter the index of the string from where the sub-string is to be fetched.

No

String

endIndex

The number of characters required in the string.

No

String


Example:
StoreSubString                   "resultSubString"            "This is a test"                "2"                  "4"

StoreStringLength

Increments the string length by the value specified by the user and stores it into a variable.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

mainstring

A string from which a length will be derived

No

String

intValue

The value by which the length needs to be incremented.

No

Integer

Examples:
StoreStringLength                     "length"              "This is a test"               "3"

WriteToTextFile

This action allows users to write or append the text in the specified file.

(info) User performing this action should have write access to the corresponding file and folder.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

FilePath

Enter the absolute path to the file in which you want to make changes.

Yes

String

Text

Enter the content to be overwritten or appended.

No

String

Mode

Value of this parameter can be OVERWRITE or APPEND. If user keeps mode empty, it will be considered as append.

Yes

String

Example:
WriteToTextFile                  "C:\Users\Notepad.txt"          "Qualitia"            "Append"


Date.StoreModifiedDate

This action modifies the date interval based on the data provided by user and stores the modified date in the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Inputdate

Enter the date to which you want to add the interval.

Yes

String

Interval

Enter the interval which you want to modify. Value for this parameter can be as follows:

  • yyyy - Year
  • q - Quarter
  • m - Month
  • y - Day of year
  • d - Day
  • w - Weekday
  • ww - Week of year
  • h - Hours
  • n - Minutes
  • s – Seconds

Yes

String

Data

Enter the number of intervals you want to add to the input date. The number can be positive for future dates and negative for dates in the past.

YesString
key

Enter the key name under which you want to store the modified date. The key value can be retrieved using the key name.

YesString

Example:

Data.StoreModifiedDate “02/28/2001”     “yyyy”    “10”    “Key”

Post execution, Qualitia will store 02/28/2010 in the key.

Date.ChangeDateFormat

This action modifies format of the date and time based on the format specified by the user and stores the date and time in the modified format under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Inputdate

Enter the date whose format you want to change.

Yes

String

Format

Enter the value for the format you want to update the date into. Value for this parameter can be as follows:

  • 0 – Converts current date into mm/dd/yy and time (if specified) into hh:mm:ss PM/AM.
  • 1 – Converts current date into weekday, monthname, year format.
  • 2 – Converts current date into mm/dd/yy format.
  • 3 – Converts current time into hh:mm:ss PM/AM format
  • 4 - Converts current time into hh:mm format.

Yes

Integer

key

Enter the key name under which you want to store the modified date. The key value can be retrieved using the key name.

YesString

Example:

Date.ChangeDateFormat           “02/28/2001”     “1”    “Key”

Post execution, Qualitia will store Monday, February, 2010 in the key.

DB.ExecuteDDLQueryAndStoreInFile

This action executes Data Definition Language (DDL) queries and stores the result set of the fired query in a text file.

Prerequisite:

Before using this action, ensure that the required databases and database drivers are installed.


Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

DriverString

The DriverString is a combination of driver and database details which helps automation tool to connect to the database. You must provide details in specified format as follows:

DRIVER=~{<DriverName>~};Server=<ServerIP/HostName,PortNumber>; Database=<DBName>;UID=<DBUsername>;PWD=<DBPassword>

Yes

String

Query

The query that needs to be executed.

Yes

String

FilePath

Enter the absolute path to the file in which you want to store the results.

YesString

Example:

  • MySQL:

DB.ExecuteDDLQueryAndStoreInFile       “DRIVER=~{MySQL ODBC 5.3 ANSI Driver~};Server=192.168.24.99,1234; Database=ProductInfo;UID=Qualitia; PWD=Qualitia”       "select * from productinfo.keyword where keywordid = 'c0ab6ad8f67234b'"        "C:\Users\localadmin\Desktop\ProductInfo.txt"

  • MS SQL:

DB.ExecuteDDLQueryAndStoreInFile       “DRIVER=~{SQL Server~}; Server=192.168.24.99,1234;Database=ProductInfo UID=Qualitia;PWD=Qualitia”       "select * from productinfo.keyword where keywordid = 'c0ab6ad8f67234b'"        "C:\Users\localadmin\Desktop\ProductInfo.txt"

DB.ExecuteDMLQueryAndStoreinKey

This action executes Data Manipulation Language (DML) queries such as update, delete and so forth and stores the query execution status into the specified key. If the query gets executed successfully, stores 0 and if the query does not get executed, stores 1.

Prerequisite:

Before using this action, ensure that the required databases and database drivers are installed.

If the record set has more than one records, value cannot be stored under the specified key. In such cases, this action fails showing appropriate error logs in the test case execution reports.


Parameter Name

Parameter Description

Mandatory

Data Type

DriverString

The DriverString is a combination of driver and database details which helps automation tool to connect to the database. You must provide details in specified format as follows:

DRIVER=~{<DriverName>~};Server=<ServerIP/HostName,PortNumber>; Database=<DBName>;UID=<DBUsername>;PWD=<DBPassword>

Yes

String

Query

The query that needs to be executed.

Yes

String

Key

Enter the key under which you want to store the results. Key value van be retrieved using the key name.

YesString

Input Parameters:

Example:

  • MySQL:

DB.ExecuteDMLQueryAndStoreInKey          “DRIVER=~{MySQL ODBC 5.3 ANSI Driver~};Server=192.168.24.99,1234; Database=ProductInfo;UID=Qualitia; PWD=Qualitia”

"select * from productinfo.keyword where keywordid = 'c0ab6ad8f67234b'"      "ProductInfo"

  • MS SQL

DB.ExecuteDMLQueryAndStoreInKey          “DRIVER=~{SQL Server~}; Server=192.168.24.99,1234;Database=ProductInfo UID=Qualitia;PWD=Qualitia”

"select * from productinfo.keyword where keywordid = 'c0ab6ad8f67234b'"      "ProductInfo"

DB.ExecuteDDLQueryandStoreDatainKey

This action executes Data Definition Language (DDL) queries and stores the result data set in the specified key. In case of finding multiple data sets, this action will fail.

Prerequisite:

Before using this action, ensure that the required databases and database drivers are installed.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

DriverString

The DriverString is a combination of driver and database details which helps automation tool to connect to the database. You must provide details in specified format as follows:

DRIVER=~{<DriverName>~};Server=<ServerIP/HostName,PortNumber>; Database=<DBName>;UID=<DBUsername>;PWD=<DBPassword>

Yes

String

Query

The query that needs to be executed.

Yes

String

Key

Enter the key under which you want to store the results. Key value van be retrieved using the key name.

YesString

Example:

  • MySQL:

DB.ExecuteDDLQueryandStoreDatainKey         “DRIVER=~{MySQL ODBC 5.3 ANSI Driver~};Server=192.168.24.99,1234; Database=ProductInfo;UID=Qualitia; PWD=Qualitia”

"select * from productinfo.keyword where keywordid = 'c0ab6ad8f67234b'"       "ProductInfo"

  • MS SQL:

DB.ExecuteDDLQueryandStoreDatainKey         “DRIVER=~{SQL Server~}; Server=192.168.24.99,1234;Database=ProductInfo UID=Qualitia;PWD=Qualitia”

"select * from productinfo.keyword where keywordid = 'c0ab6ad8f67234b'"       "ProductInfo"


ChangeCaseAndStore

This action changes the case of the provided string and stores the final value into the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Key

Enter the key name in which you want to store the updated string.

Yes

String

InputString

Enter the string whose case you want to change.

Yes

String

Case

Value for this parameter can be as follows:

  • Set Upper to change the case of the string to upper case.
  • Set Lower to change the case of the string to lower case.

Yes

String

Example:

ChangeCaseAndStore                "Key"               "Qualitia"             "Upper"

StoreStringToInteger

This action converts the provided string to the integer value and stores it into the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Key

Enter the key name in which you want to store integer value.

Yes

String

Number

Enter the number whose integer value you want to store into the key.

Yes

String

Example:

StoreStringToInteger            "Key"          "20"




LaunchApplication

This action runs the application or file from the specified path.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

filePath

Enter the absolute path of the application or file which you want to run or open.

Yes

String

AppParameters

If the filePath contains path to the executable file, enter the argument here to specify any parameters to be passed while opening the file.

No

String

AppDirectoryPath

Enter the directory of the application or executable file.

No

String

Operation

Specify the operation to performe after opening the application. You can specify following operations:

  • Open-Opens the specified file or application. This can be an executable file or folder as well.
  • Edit-Launches the application or file in the edit mode.
  • Explore-Explores the folder which is specified in the filePath parameter.
  • Find-Initiates the search operation from the specified folder path.
  • Print-Prints the file specified in the filePath parameter. This action fails in case the file is not printable.
    Default value is Open.

No

String

Mode

Enter the mode of the application or file to open. You can specify the integer value from the list below to open application in corresponding mode.
Enter,

  • 0 to hide the window.
  • 1 to activate and display the window of the application or file which is launched.
  • 2 to open the application window in minimize mode.
  • 3 to open the application window in maximize mode.
  • 4 to open the application window in its most recent size and position.
  • 5 to open the application window in its current size and position.
  • 6 to minimize the specified window and activate the next top-level window in the Z order.
  • 7 to display the window as a minimized window.
  • 8 to displays the window in its current state.
  • 9 to activate and display the window. If the window is minimized or maximized, the system restores it into its original size and position.
  • 10 to Set the show-state based on the state of the program that started the application.
    Default value is 1.

No

Integer


Example:

LaunchApplication                "C:\Application.exe"

EXCEL.StoreCellData

This action stores the value available in the specified cell. You can then use this data while developing tasks and test cases.

Input Parameters:

Parameter Name
Parameter Description
Mandatory
Data Type
filePathEnter absolute path to the Excel file from which you want to get and store the value.YesString
sheetnameEnter the sheet name from the Excel file from which value is to be stored.YesString
rowNumberEnter the row number of the cell from which you want to store the value.YesInteger
columnEnter the column ID or column name from which you want to store the value in the following format.
- Column ID either can be an index number of the column or column header (mentioned at the top of each column, starts from the letter A). For example: to specify 2nd column, use col::2 or col::B.
- Column name: Enter the name of the column from which you want to store the value. This name is provided by the user while adding data.
YesString
KeyEnter the key name under which you want to store the value. The key value can be retrieved using the key name.YesString

Example:

StoreCellData               “D:\TrainingStatus.xlsx”           “Sheet1”         “3”      “Col::3”          “Key”

EXCEL.WriteToRow

This action adds specified value or a set of values into the specified row of the Microsoft excel file.

Input Parameters:

Parameter Name
Parameter Description
Mandatory
Data Type
filePathEnter absolute path to the Excel file.YesString
sheetnameEnter the sheet name from the Excel file in which you want to add the values.YesString
RowNumberEnter the row number in which you want to add the value.YesString
ColumnIDEnter the column ID or column name in which you want to add the value in the following format.
- Column ID either can be an index number of the column or column header (mentioned at the top of each column, starts from the letter A). For example: to specify 2nd column, use col::2 or col::B.
- Column name: Enter the name of the column from which you want to store the value. This name is provided by the user while adding data.
YesString
DataThis is the data to be added to the specified Excel row. In case you are statically creating an array, values should be separated by caret (^).YesArray
Overwrite

Specify whether you want to overwrite the existing data or you want to add another row to add this data. Values for this parameter can be as follows:

  • Enter Previous to add a new row before the row specified above.
  • Enter Next to add a new row after the row specified above.
  • Enter Current to overwrite new values over the existing set of values.
NoString

Example:

WriteToRow                   “D:\TrainingStatus.xlsx”                “Sheet1”            “3”               “Col::3”         “PASS^PASS^FAIL^WIP”              “Current”

EXCEL.WriteToColumn

This action adds specified value or a set of values into the specified column of the Microsoft excel file.

Input Parameters:

Parameter Name
Parameter Description
Mandatory
Data Type
filePathEnter absolute path to the Excel file.YesString
sheetnameEnter the sheet name from the Excel file in which you want to add the values.YesString
RowNumberEnter the row number in which you want to add the value.YesString
ColumnIDEnter the column ID or column name in which you want to add the value in the following format.
- Column ID either can be an index number of the column or column header (mentioned at the top of each column, starts from the letter A). For example: To specify the 2nd column, use col::2 or col::B.
- Column Name: Enter the name of the column from which you want to store the value. This name is provided by the user while adding data.
YesString
DataYou need to add the data in the specified Excel row. In case you are statically creating an array, values should be separated by caret (^).YesArray
Overwrite

Specify whether you want to overwrite the existing data or you want to add another row to add this data. Values for this parameter can be as follows:

  • Enter Previous to add a new column before the column specified above.
  • Enter Next to add a new column after the column specified above.
  • Enter Current to overwrite new values over the existing set of values.
NoString

Example:

WriteToColumn               “D:\TrainingStatus.xlsx”           “Sheet1”           “3”          “Col::3”         “USER1^ USER2^ USER3^ USER4”          “Previous”

EXCEL.StoreColumnCount

This action stores the total number of columns present in the specified sheet of Microsoft Excel.

Input Parameters:

Parameter Name
Parameter Description
Mandatory
Data Type
filePathEnter absolute path to the Excel file.YesString
sheetnameEnter the sheet name from the Excel file from which you want to store the column count.YesString
ignoreBlankColumn

Specify whether you want to ignore the blank columns while calculation.

  • To ignore blank columns, use True.
  • To consider even blank columns, use False.
NoString
KeyEnter the key name under which you want to store the value.YesString

Example:

Excel.StoreColumnCount           “D:\TrainingStatus.xlsx”          “Sheet1”         “True”        “Key”

EXCEL.StoreRowCount

This action stores the total number of rows present in the specified sheet of Microsoft Excel.

Input Parameters:

Parameter Name
Parameter Description
Mandatory
Data Type
KeyEnter the key name under which you want to store the value.                       YesString
filePathEnter the absolute path to the Excel file.YesString
sheetnameEnter the sheet name from the Excel file from which you want to store the row count.YesString
ignoreBlankRows

Specify whether you want to ignore the blank rows while calculation.

  • To ignore blank rows, use True.
  • To consider even blank rows, use False.
NoString

Example:

Excel.StoreRowCount           “D:\TrainingStatus.xlsx”          “Sheet1”         “True”        “Key”

EXCEL.StoreColumnDataOccurance

This action stores the occurrence of the specific value into the specified column.

Input Parameters:

Parameter Name
Parameter Description
Mandatory
Data Type
filePathEnter absolute path to the Excel file.YesString
sheetnameEnter the sheet name from the Excel file in which you want to check for the data.YesString
ColumnNumberEnter the column ID or column name in which you want to add the value in the following format.
- Column ID either can be an index number of the column or column header (mentioned at the top of each column, starts from the letter A). For example: to specify 2nd column, use col::2 or col::B
- Column name: Enter the name of the column from which you want to store the value. This name is provided by the user while adding data.
YesString
Data

You need to add the data in the specified Excel row. In case you are statically creating an array, values should be separated by caret (^).

YesString
Key

Enter the key name under which you want to store the occurrence.

YesString

Example:

Excel.StoreColumnDataOccurrence              “D:\TrainingStatus.xlsx”           “Sheet1”           “True”        “Key”


File.CompareFileContents

This action compares two text files and validates whether content inside them is identical.

This action compares only the files with flat structures (like .csv, .txt, .json and so forth). 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

File1

Enter the absolute path to the source file from which you want to compare the content.

Yes

String

File2

Enter the absolute path to the target file with which you want to compare the source file content.

YesString
CaseSensitive

Enter whether you want to consider case-sensitivity when comparing content. Value for this parameter can be True or False.

  • Set True for case-sensitive comparison.
  • Set False for case-insensitive comparison.
YesString
IgnoreWhitespace

Enter whether you want to consider whitespaces when comparing file contents. Value for this parameter can be True or False.

  • Set True if you want to consider whitespaces.
  • Set False if you want to ignore whitespaces.
Note: Only leading and trailing whitespaces will be ignored if you set this parameter to True. Whitespaces inside the content will not be considered.
YesString

Example:

File.CompareFileContents                  “C:\Users\admin\Downloads\Cust_Info.xlsx”               “C:\Users\admin\Downloads\Client_list.xlsx”        “False”       “True”

FILE.StoreCharacterCount

This action stores the total number of characters present in the specified text file. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

FilePath

Enter the absolute path to the file from which you want to store characters.

Yes

String

Key

Enter the key name in which you want to store the character count.

YesString

IgnoreWhitespace

Enter whether you want to consider whitespaces when storing character count. Value for this parameter can be True or False.

  • Set True if you do not want to consider tabs and spaces as characters.
  • Set False if you want to consider tabs and spaces as characters.

Note: A space or a tab is counted as one character.

YesString

Example:

FILE.StoreCharacterCount        “C:\Users\admin\Downloads\Cust_Info.txt”        “Key”       “True”

FILE.StoreStringByLineNumber

This action stores data from the specified row of the specified text file in the key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

FilePath

Enter the absolute path to the file from which you want to store data.

Yes

String

RowNumber

Enter the row number from which you want to get and store the data.

YesString
Key

Enter the key name in which you want to store the data.  

YesString

Example:

FILE.StoreStringByLineNumber        “C:\Users\admin\Downloads\Cust_Info”     “2”    “Key”

FILE.VerifyStringExistInFile

This action verifies whether the specified data exists in the specified text file.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

FilePath

Enter the absolute path to the file in which you want to verify data.

Yes

String

Data

Enter the data which you want to verify in the file.

YesString
CaseSensitive

Enter whether you want to consider case-sensitivity when verifying data. Value for this parameter can be True or False.

  • Set True for case-sensitive comparison.
  • Set False for case-insensitive comparison. 
YesString

Example:

FILE.VerifyStringExistInFile       “C:\Users\admin\Downloads\Cust_Info”     “Qualitia”    “True”

File.VerifyFileExist

This action verifies the existence of the specified file at the specified location.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

FilePath

Enter the absolute path to the file which you want to verify.

Yes

String

Example:

File.VerifyFileExist        “C:\Users\admin\Downloads\Cust_List.txt”

File.VerifyFolderExist

This action verifies the existence of the specified folder at the specified location.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

FolderPath

Enter the path to the folder which you want to verify.

Yes

String

Example:

File.VerifyFolderExist        “C:\Users\admin\Downloads\Cust_Info”

TypeKey

This action simulates the keystroke events specified into the parameter.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

KeyboardInput

Enter the keys which you want to simulate.

Yes

String

This action supports following keystrokes:

To pressEnter
tab key"Tab"
enter key"Enter"
F1 key"F1"
F2 key"F2"
F3 key"F3"
F4 key"F4"
F5 key"F5"
F6 key"F6"
F7 key"F7"
F8 key"F8"
F9 key"F9"
F10 key"F10"
F11 key"F11"
F12 key"F13"
space key"Space"
CapsLock key"CapsLock"
delete key"Delete"
down arrow key"Down"
up arrow key"Up"
right arrow key"Right"
left arrow key"Left"
end key"End"
home key"Home"
page down key"Page_Down"
page up key"Page_Up"
shift key"Shift"


Example:

TypeKey       "Enter"

TypeString

This action simulates the keyboard inputs specified into the parameters.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

StringData

Enter the string which you want to type.

Yes

String

Example:

TypeString        "qualitiasoft.com"

CalculateDifferenceInDateAndStore

This action stores the difference between two specified dates under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

strKey

The key in which the difference will be stored.

Yes

String

interval

It is the expression that you want to use to calculate the differences between from date and to date. Please refer to the Interval section below for more examples of it.

Yes

String

fromDate

Enter the date from.

Yes

Integer

toDate

Enter the date to.

Yes

Integer

(info) Interval: The interval parameter can have the following values:

Parameter

Description

YYYY

Year

Q

Quarter

M

Month

Y

Day of year

D

Day

W

Weekday

WW

Week of year

H

Hour

N

Minute

S

seconds

Example:
CalculateDifferenceInDateAndStore      "Key"            "D"        "12-Dec-2016"      "12-Dec-2027"


ComparePattern

This action compares the data passed by user and verifies that it matches the pattern specified by the user.  

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

pattern

Enter the pattern against which the data specified by the user will be verified.

Yes

String

data

Enter the data which will be matched against the pattern specified by the user.

No

String

caseSensitive

Specify the kind of comparison; case-sensitive or case-insensitive.

  • Set True for case-sensitive comparison.
  • Set False for case-insensitive comparison.

No

String

Example:
Consider a bank application where on adding a user an account number is generated which is unique and consists of alphanumeric characters. The number of characters in that account number is 10 where the first 5 are alphabets and remaining five are numbers.

Suppose the account number is YuIFp96062. If this has to be verified for the pattern mentioned, we can use the action ComparePattern as follows:

  • strPattern -  [a-z]~{0,5~}[0-9]~{5~}
  • strData –  YuIFp96062
  • blnCase -    False

ComparePattern                 “[a-z]~{0,5~}[0-9]~{5~}“                   "YuIFp96062"                  "false"

Here the ComparePattern action shall verify that data mentioned matched the specified pattern .The action will return 0, if the data matches the specified pattern , else it will return 2 if the data does not match the pattern. In any other case it will return 1.

If the pattern is using Qualitia's special characters like {,},/,^ then they should be prefixed with /.

Special characters and sequences are used in writing patterns for regular expressions. For a complete list of the regular expression syntax visit the VBScript syntax Guide for Regular Expressions.

CompareString

This action compares two strings without trimming the spaces. The comparison can be either case-sensitive / non case-sensitive. Even a key can be passed as one of the parameters for comparison where the CompareString function will retrieve the value from the key and that value will be compared with expected.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

actualString

Enter the string value that you want to compare. You can pass the key name here enclosed in braces.

No

String

excpectedString

Enter the expected string value against which the actualString will be compared. You can pass the key name here enclosed in braces.

No

String

caseSensitive

Specify the kind of comparison; case-sensitive or case-insensitive.

  • Set True for case-sensitive comparison.
  • Set False for case-insensitive comparison.

No

String

CompareString           "{key}"           "Cancel"          "true"

Here the CompareString action shall retrieve the value for the key (here Cancel) and compare it with the expected (here Cancel) with case sensitive comparison as True. The action will return 0, if the strings match else it will return 2 if the strings do not match. It will return 1 in any other case (like an error).

CompareTabularResults

This action compares the database results in two files and displays only the difference in an Microsoft or a kingsoft Excel sheet. A link is generated in the log file. On clicking the link, the excel sheet opens in which the difference in the data is displayed. This action compares the following file types which contain DB results. These files contain the results after executing the queries using the actions "ExecuteQueryAndStoreInFile" or "StoreTableData". The supported file extension types are : txt, xml and xls.

  1. text and text
  2. text and excel
  3. text and xml
  4. xml and xml
  5. xml and excel
  6. excel and excel

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

sourceFile

Enter the source file to be used for the comparison. 

Yes

String

targetFile

Enter the target file against which you want to compare the source file.

Yes

String

resultFileType

The file type in which the difference between the two results need to be displayed. The file type supported is: 
MSExcel 

No

String

Example
CompareTabularResults             "C:\DBResults\XML\ORACLE\Result.xml"                 "C:\DBResults\Excel\ORACLE\Result.xls"                     "MSExcel"

DoubleClick

This action double clicks at the specified location of the screen or object from the application under test.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

x-coordinate

Enter the x-coordinate of the screen where you want to perform double click.

Yes

Integer

y-coordinate

Enter the y-coordinate of the screen where you want to perform double click.

No

Integer

 Button

Specify which button of the mouse you want to press while performing the double click action. Valid parameters are left, middle, and right. Default is left.

No

String

Example:

DoubleClick         “233”             “342”          “Left”

IsArraySorted

This action verifies whether the array is sorted in ascending/descending order.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

array data

The array to be verified for ascending or descending order.
The list of data provided should be carat(^) separated.

Yes

Array

datatype

This is the type of data considered for testing. Supported data types are
STRING : These are combination of alphanumeric and special characters items. 
INTEGER : These are strictly numerical items.

Yes

String-

direction

The way the data are to be sorted, i.e. in either ascending or descending. Supported directions are:
1=indicates ascending
2=indicates descending

No

String

Example:
IsArraySorted                  "0^1^4^10"               "Integer"             "1"

SecureStoreVariable

This action stores the specified value securely by encrypting it under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

key

The variable under which the string data is to be stored.

Yes

String

data

Enter the data to be stored in encrypted mode.

No

String

Example:

SecureStoreVariable              "Password"                               "Encrypt(Abc)"

When the focus is moved away from the data ABC, Qualitia will automatically encrypt the text to "vHpmlfI4R3PQJskt3nuqw==þNWE3ZDdkNjE3N2JmNDM2ODgxMzQwYWI1MTA3YWNjMDc="

VerifyDifference

This action verifies the difference between two integer values and validates it with the expected difference value.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Int1

Enter the 1st numerical value to compare. You can pass the key name here enclosed in braces.

No

String

Int2

Enter the 2nd numerical value to compare. You can pass the key name here enclosed in braces.

No

String

expectedDifference

Enter the expected difference between the two numbers.

No

String

Example:
VerifyDifference                       "30"                 "40"               "10"

VerifyStringContainsValue

This action verifies that the substring is present within the main string. Comparison can either be case sensitive or insensitive.

This action verifies that the substring is present within the main string. Comparison can either be case sensitive or insensitive.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

strMainString

Enter the main string in which you want to search substring. You can pass the key name here enclosed in braces.

No

String

strSubstring

Enter the 2nd string value that you want to search. You can pass the key name here enclosed in braces.

No

String

blncase

Specify the kind of comparison; case-sensitive or case-insensitive.

  • Set True for case-sensitive comparison.
  • Set False for case-insensitive comparison.

No

String

VerifyStringContainsValue      "{mainStrKey}"                               "the action"              "True"

Here the VerifyStringContainsValue action shall retrieve the value for the key mainStrKey and compare it with the expected with case sensitive comparison as True.

The action will return 0, if the sub-string is found in the main string, else it will return 2 if the sub-string is not found in the main string. In any other case it will return 1.

Empty and null substrings will not be verified by this action.

IMAGE.CompareTwoImages

This action compares two images. The file extension and resolution of both the images (source and target) should be same, otherwise, the step will fail.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

SourceImagePath

Enter the absolute path to the source image which you want to compare.

Yes

String

TargetImagePath

Enter the absolute path to the target image with which you want to compare the source image.

Yes

String

Example:

IMAGE.CompareTwoImages    “C:\Users\Qualitia\Cust_Sign.png”        “C:\Users\Qualitia\Cust_Logo.png”

StoreSqRoot

This action stores the square root of the specified number under the key. The stored key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Number

Enter the number whose square root you want to store.

Yes

Integer

Key

Enter the key name under which you want to store the square root.

Yes

String

Example:

StoreSqRoot              "144"             "Key"

In this case, the 12 will be stored under key.


StoreStringFromRight

This action stores the specified number of characters from the right side of the given string. The stored key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

InputString

Enter the input string from which you want to store the characters.

Yes

String

length

Specify the number of characters you want to store under the key name. Enter 0 if you want to store an empty string.

Yes

String

Key

Enter the key name under which you want to store the specified number of characters.

Yes

String

Example:

StoreStringFromRight             "John Doe"         "3"          "Key"

In this case, the last three characters i.e. Doe will be stored under the key name.

StoreRandomString

This action generates and stores any random string of the specified length into the key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Key

Enter the key name under which you want to store the random text.

Yes

String

Length

Specify the number of characters of the string you want to generate and store under the key name.

Yes

Integer

Example:

StoreRandomString               "Key"                    "23"

StoreRandomAlphanumericString

This action generates and stores any random alphanumeric string of the specified length into the key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Key

Enter the key name under which you want to store the random text.

Yes

String

Length

Specify the number of characters of the string you want to generate and store under the key name.

Yes

String

Example:

StoreRandomAlphanumericString               "Key"                       "33"

StoreRandomNumber

This action picks up any random number from the specified range and stores that number in the specified key. The key value can be retrieved using the key name.

Number can be duplicated, if you use this action multiple times in a single test case.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

minNumber

Enter the minimum number.

Yes

String

maxNumber

Enter the minimum number.

YesString

strKey

Enter the key name under which you want to store the random number.

YesString

Example:

Data.StoreRandomNumber        “123”         “890”        “Key”

StoreStringFromLeft

This action stores the specified number of characters from the left side of the given string. The key value can be retrieved using the key name.

Enter 0 if you want to store the empty string.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

InputString

Enter the input string from which you want to store the characters.

Yes

String

length

Specify the number of characters you want to store under the key name. Enter 0 if you want to store an empty string.

Yes

Integer

Key

Enter the key name under which you want to store the specified number of characters.

Yes

String

ReplaceStringBySubString

This action replaces the specified part from the string with another string and stores the updated value into the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Key

Enter the key name in which you want to store the updated string.

Yes

String

InputString

Enter the string that you want to replace.

Yes

String

Find

Enter the part of the string that need to be replaced.

Yes

String

Replacewith

Enter the replacement text for the first string.

Yes

String

Start

Enter the start position. Default is 1. All characters before the start position will be removed.

No

String

Count

Enter the number of substitutions to perform. Default is -1, which makes all possible substitutions.

No

String

CaseSensitive

Enter whether you want to consider case-sensitivity when comparing the string before replacement. Value for this parameter can be 0 or 1.

  • Set 0 for case-insensitive comparison.
  • Set 1 for case-sensitive comparison.

No

String

Example:

ReplaceStringBySubString          "Key"           "Australia"       "A"         "B"        "1"         "-1"        "0"

XML.SetNodeValue

This action reads the specified XML file and updates the inner value of the specified node.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

xmlFilePath

Enter the absolute path to the XML file in which you want to update the value.

Yes

String

xPath

Enter the path to the node (X Path) whose value you want to update.

YesString
strValue

Enter the value which you want to add in the specified node.

YesString

Example:

SetNodeValue         “C:\Users\Qualitia\Cust_List.xml”        “//DataSet[@ID='394502re33']/Step/Param[@ParamSeq='4']”         “Qualitia Automation Studio”

XML.StoreNodeValue

This action reads the specified XML file and stores the inner value of the specified node under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

xmlFilePath

Enter the absolute path to the XML file from which you want to get and store the value.

Yes

String

xPath

Enter the path to the node (XPath) from which you want to read and store the inner text.

YesString

strKey

Enter the key name under which you want to store the node value (inner text from the node).

YesString

Example:

XML.StoreNodeValue         “C:\Users\Qualitia\Actors_List.xml”        "//actors/actor[@id="3"]"             “ActorName”

If you execute this action in the XML mentioned above, this William Kennedy will be stored under the key name ActorName. You can use the value stored under the ActorName key in the test case execution flow.

JSON.StoreJsonString

This action reads the specified JSON file, navigates to the specified JSON path, and stores the value of the specified attribute under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

jsonFilePath

Enter the absolute path to the JSON file from which you want to store the value.

Yes

String

Jpath

Enter the path to the node (J Path) from which you want to read and store the value.

YesString

elementIndx

Enter the index number which results you want to store in the specified key. Index starts from 0.

YesInteger
attributeName

Enter the attribute name whose value you want to save under the specified key.

NoString
strKey

Enter the key name under which you want to store the attribute value.

YesKey

Example:

JSON.StoreJsonString    “C:\Users\Qualitia\Cust_List.json”        “$.Customers.Country[0].India”         “3”         “Name”          “Key”

JSON.UpdateJsonString

This action reads the specified JSON file, navigates to the specified JSON path, and sets the specified value to the specified attribute.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

jsonFilePath

Enter the absolute path to the JSON file in which you want to set the value.

Yes

String

jsonPath

Enter the path to the node (Json Path) to which you want to set the value.

YesString
indx

Enter the index number which results you want to set in the specified value. Index starts from 0.

YesInteger
attributeNameEnter the attribute name against which you want to set the value.NoInteger
strValue

Enter the value which you want to set against the specified attribute.

YesString

Example:

JSON.UpdateJsonString    “C:\Users\Qualitia\Cust_List.json”        “$.Customers.Country[0].India”         “3”         “Company”          “Qualitia”

REST.ExecuteServiceRequest

This action executes the specified REST request. Qualitia gives you provision to store the response at the specified file path location in the JSON format, if required.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

URL

Enter the REST URL where you want to execute the request.

Yes

String

method

Enter method you want to execute on the specified URL.

Yes

String

authType

Enter the authentication type you want to use when executing the REST request. Qualitia supports two authentication types: Basic and NoAuth.

YesString
UsernameEnter the username if the authentication type selected is Basic.NoString
PasswordEnter the password if the authentication type selected is Basic.NoString
reqFilePathEnter the absolute path to the file which has REST request related information in the JSON format.NoString
resFilePathEnter the absolute path to the file in which you want to store the REST response in the JSON format.NoString

Example:

REST.ExecuteServiceRequest                “192.122.22.34:8098/rest/ 1.0/api/qProjectMapping/project/OAT”          “POST”    “Basic”    “john.doe@gmail.com”  “john.doe@123”  

“C:\Users\Qualitia\Request-Cust_List.json”        “C:\Users\Qualitia\Response-Cust_List.json”

SOAP.ExecuteServiceRequest

This action executes the specified SOAP request in the specified XML file. You can also store response in the XML file, if required.

Prerequisites:

In order to execute this action, you should know how to develop request XML for SOAP operations.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

url

Enter the API URL.

Yes

String

authType

Enter the authentication type you want to use when executing the REST request. Qualitia supports two authentication types: Basic and NoAuth.

NoString
userNameEnter the username if the authentication type selected is Basic.NoString
passwordEnter the password if the authentication type selected is Basic.NoString
requestType

Enter the request type you want to execute.

YesString
reqXMLPathEnter the absolute path to the file which has REST request related information in the JSON format.YesString
methodNameEnter the method name which you want to use when executing the SOAP request.NoString
resXmlPath

Enter the absolute path to the XML file where the response will be stored.

NoString

Example:

SOAP.ExecuteServiceRequest      “http://www.dnonline.com/calculator.asmx”   “Basic”   “Qualitia”   “Qualitia”   “Post”   “C:\Users\localadmin\Desktop\SOAPRequest.xml”   “http://abcurl.org/add”     “C:\Users\localadmin\Desktop\SOAPResponse.xml”


  • No labels