DownloadFile
This action clicks the link/element which will populate a download window, and then downloads the file.
The action supports and is explicitly tested for FF3, IE7, IE8. The action will not wait till the file is downloaded, this have to be handle externally by the user.
This action requires AutoIt to be installed.
- Install AutoIT from the location http://www.autoitscript.com/site/autoit/downloads/
- Click on Download AutoIt v3.
- Choose full installation.
- After the set up is completed, AutoIT installation path should be set against the Qualitia's configfile key "AutoITPath"
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
folderName | The path where the file is to be download. Please check Table 1 "Parameter Mandate" to validate in the situation where this parameter will be mandatory. In case the parameter Mandatory; the user should take care that the folder path exists. The action does not validates whether the folder exist | Yes | String |
Filename | The filename of the downloadable file, to be given incase the user requires to give specific name and not depend on the default name of the file. In case, the file already exist, similar window like below will appear. Such windows are not handled by the action. Incase, the user does not provide this data, the action will pick the default file name available while download. This parameter is not mandatory | Yes | String |
1. During execution, IE blocks download window. You will get a similar message below. 
Because of this IE restriction, the download window will not appear, leading to unexpected behavior. To avoid this, please follow the settings below: 1. From Internet Explorer, click Tools, and then click Internet Options. The Internet Options dialog box appears. 2. Click the Security tab. The Internet Options dialog box shows your security levels and zones. 3. Select the Internet zone, and then click Custom Level. The Security Settings dialog box file downloads.
For further details, please check: http://msdn.microsoft.com/en-us/library/dd565669
2. When a download window is populated, the following window will also exist.
Please make sure to check the checkbox "Close this dialog when download completes". Usually, the checkbox is checked by default. If not, please check it manually once. Qualitia action "DownloadFile" does not handle this window. The execution will not be hampered by this, but it's just that unwanted window will be open.
Important Notes for Firefox:
Firefox uses the default Firefox instance:- 
Above will be the default download setting for the default firefox instance. Hence, according to the setting the files will be downloading into the predefined location, here its "Desktop". During execution, the action will select "Save file" from a window similar to below and accordingly the file will be downloaded to desktop by firefox.
Table 1: Parameter Mandate
Browser | locator | folderPath | fileName |
|---|---|---|---|
Internet Explorer | Mandatory | Mandatory | Not mandatory |
Firefox [Default instance invoke my Selenium] | Mandatory | Mandatory | Not mandatory |
Example
DownloadFile "C:/ProgramData" "Qualitia.txt"
Note:This action is tested on IE8,FF& chrome. This action is not supported on IE9,IE10,chrome<16.
On this page:
VerifyExistence
This action verifies the existence of the specified object.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
existence | Value for this parameters can be true or false. | Yes | String |
Example:
VerifyExistence "True"
VerifyVisibility
This action verifies the visibility of the specified object.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
visibility | Value of this parameter can be true or false. | Yes | String |
Example:
VerifyVisibility "True"
Click
This action clicks the specified object.
Example:
Click
StorePropertyValue
This action stores the property value of the specified object against a key name. The stored value can be retrieved by using the key name
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
Key | Variable in which the property value will be stored | Yes | String |
Property | Property/attribute name of the object whose value needs to be stored. This can be any apt attribute of that html object. | Yes | String |
Example:
StorePropertyValue "value" "name"
SetFocus
This action sets the focus to the specified object.
Example:
SetFocus
MouseOver
This action simulates the user hovering mouse over the specified object.
Example:
MouseOver
MouseDown
This action simulates the user pressing the left mouse button at the specified location.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
X | The x-coordinate of the click. | Yes | String |
Y | The Y-coordinate of the click. | Yes | String |
Example:
MouseDown "5" "10"
MouseUp
This action simulates the event that occurs when the user releases the mouse button.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
X | The x-coordinate of the click. | Yes | String |
Y | The Y-coordinate of the click. | Yes | String |
Example:
MouseUp "45" "56"
ClickAt
This action clicks at a particular point on the object.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
X | The x-coordinate of the click. | Yes | String |
Y | The Y-coordinate of the click. | Yes | String |
Example
ClickAt "5" "10"
WaitForObject
This action waits for the object to exist or not exist for the maximum no of seconds specified.
If the object is found or not found before the maximum time specified, the action shall stop waiting.
If the wait time is "" then the wait time shall be the "Sync Time" time set on the Qualitia Configuration (Execution) window.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
waitTime | The maximum no of seconds to wait for the object to exist or not exist | Yes | String |
existence | Boolean value to specify if the object should exist or not. | Yes | String |
Example:
WaitForObject "10" "true"
The action shall wait for maximum 10 seconds for the object to exist. If the object exists before 10 seconds elapses, the wait shall be over.
WaitForObject "15" "False"
The action shall wait for maximum 15 seconds for the object not to exist. If the object does not exist before 15 seconds elapses, the wait shall be over.
DragAndDrop
This action drags an image to a certain distance and drops it.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
offsetX | Offset in pixels from the current location to which the element should be moved. The offset parameter can be as +100,100 , -100, 10,… | Yes | String |
offsetY | offset in pixels from the current location to which the element should be moved The offset parameter can be as -100,100 , +100 | Yes | String |
Example
DragAndDrop "-100" "500"
ClickAndWait
This action clicks the edit box and waits.It waits for the max sync time set in the Qualitia Configuration (Execution) window.
If the page loads before the maximum sync time, then the action will stop waiting.
Example:
ClickAndWait
In Webdriver we wait for the document to come in ready state. If it is in ready state it is assumed that the page is loaded completely and Webdriver will stop waiting. The condition to wait till the document is in ready state and assume that the page is loaded could however not work as expected at all times.
StoreExistence
This action stores the existence of an object under the specified key. The key value can be retrieved using the key name.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
Key | The variable in which the existence (true/false) of the object is stored. | Yes | String |
Example:
StoreExistence "Key"
StoreChildCount
This action stores the child count of the specified object under the key name. The key value can be retrieved using the key name.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
Key | The variable in which the child count will be saved. | Yes | String |
Example:
StoreChildCount "Key"
ScrollIntoView
This action scrolls to view the specified object.
This action does not have any parameters.
Example:
ScrollIntoView
