Document toolboxDocument toolbox

WebList Actions

Click

This action clicks the specified object.

This action does not have any parameter.

Example:

Click

ClickAction

This action clicks the specified object from the web application under test.

This action does not have any parameter.

Note: ActionClick uses underlying selenium WebDriver "Action" class to perform click action. Qualitia recommends using this action for web applications.

Example:

ClickAction

ClickAt

This action clicks at the specified point on the object.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

X

The x-coordinate of the click.

Yes

String

Y

The y-coordinate of the click.

Yes

String

Example

ClickAt        "5"            "10"

ClickJS

This action clicks the specified object from the web application under test.

This action does not have any parameter.

Note: ClickJS uses javascript code to perform the click action. Qualitia recommends using this action for web applications.

Example:
ClickJS

DeselectAll

This action deselects all the options from the web list. 

This action does not have any parameter.  

Example:

DeselectAll

DeselectItemByText

This action deselects option specified in the parameter.  

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

itemName

Enter the item name you want to deselect. 

Yes

String


Example:

DeselectItemByText           "Name"

DeselectItemByValue

This action deselects the specified parameterized item from the list.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

value

Enter the item that you want to deselect from the list.

Yes

String

Example:

DeselectItemByValue            "Name"

On this page:

DeSelectItems

This action deselects the specified selected items from the specified list box. Multiple items for deselection can be given only for the list box that has multi-selection property.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

items

Enter the expected list items that are to be deselected from the list box. Separate multiple items by carat (^) operator.

Yes

Array

Example:

Consider a list containing names of countries. If it contains list items in the order "India", "England", "Australia" , "SA" , if the user wishes to deselect "India and Australia", then this action can be used as follows:

DeSelectItems                                 "India^Australia"

 If an empty data ("" or $NULL$) is passed as the data, the action will passed only if there exist an "" item in the webList to be deselected.

DeselectMultipleItemsByIndex

This action deselects multiple items specified in the parameter. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

indices

Enter the indices of the items you want to deselect. Multiple items should be separated by (^) caret. Index starts from 1.

Yes

Array


Example:

DeselectMultipleItemsByIndex      "1^5^8"

DoubleClick

This action double-clicks the specified web element.

This action does not have any parameter.

Example:

DoubleClick

DownloadFile

This action clicks the link/element which will populate a download window, and then downloads the file.

The action supports and is explicitly tested for FF3, IE7, IE8. The action will not wait till the file is downloaded, this has to be handled externally by the user.

This action requires AutoIt to be installed.

  1. Install AutoIT from the location http://www.autoitscript.com/site/autoit/downloads/
  2. Click on Download AutoIt v3.
  3. Choose full installation.
  4. After the set up is completed, AutoIT installation path should be set against the Qualitia's configfile key "AutoITPath"

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

folderName

The path where the file is to be download. Please check Table 1 "Parameter Mandate" to validate in the situation where this parameter will be mandatory. In case the parameter Mandatory; the user should take care that the folder path exists. The action does not validates whether the folder exist

Yes

String

Filename

The filename of the downloadable file, to be given incase the user requires to give specific name and not depend on the default name of the file. In case, the file already exist, similar window like below will appear. Such windows are not handled by the action. Incase, the user does not provide this data, the action will pick the default file name available while download.

No

String


Example:



Example 

DownloadFile               "C:/ProgramData"           "Qualitia" 

 This action is tested on IE8, FF & chrome. This action is not supported on IE9, IE10, and Google Chrome <16.

DragAndDropToOffset

This action drags and drops the specified web element at the specified location. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

offsetX

Enter the offset in pixels from the current location to which the element should be moved. The offset parameter can be as +100,100 , -100, 10, and so on.

Yes

String

offsetY

Enter the offset in pixels from the current location to which the element should be moved. The offset parameter can be as -100,100 , +100, and so on.

Yes

String

Example:

DragAndDropOffset            "100"              "500"

IsMultiselectList

This action verifies that web list element supports selecting multiple options and stores the result under the specified key

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Key

Enter the key name under which the result will be stored. The key value can be retrieved using the key name.

  • Stores True if the web list can select multiple options. 
  • Stores False if the web list cannot select multiple options. 

Yes

String

Example:

IsMultiselectList          "Key"

MouseOver

This action simulates a mouse hovering over the specified object.

This action does not have any parameter. 

Example:

MouseOver

MouseDown

This action simulates left-click at the specified location on the screen.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

X

The x-coordinate of the click.

Yes

String

Y

The x-coordinate of the click.

Yes

String

Example:

MouseDown                 "5"           "10"

MouseUp

This action simulates the event that occurs when the user releases the mouse button.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

X

The x-coordinate of the click.

Yes

String

Y

The y-coordinate of the click.

Yes

String

Example

MouseUp         "5"          "10"

RightClick

This action right-clicks the specified web element.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

option

The context menu option number that needs to be clicked.

Yes

String

Example:

RightClick             "3''

This will select the third option from the context-menu.

ScrollIntoView

This action scrolls to view the specified object. 

This action does not have any parameter. 

Example:

ScrollIntoView

SelectItemAndWait

This action selects an item from the list and waits. It waits for the sync time set under the Configuration Settings (Execution) window. If the page loads before reaching the maximum sync time, then the action will stop waiting.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

item

Enter the item to be selected from the list.

Yes

String

Example:

Consider a list containing names of countries. If it contains list items "India", "England", "Australia" and the user wishes to select "England", then this action can be used as follows

SelectItemAndWait                      "India"

If an empty data ("" or $NULL$) is passed as the data, the action will passed only if there exist an "" item in the webList.Webdriver waits for the document to come in ready state. If it is in ready state it is assumed that the page is loaded completely and Webdriver stops waiting. The condition to wait till the document is in ready state and assume that the page is loaded could however not work as expected at all times.

SelectItemByIndex

This action selects the specified item from the list. Index starts from 1. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

index

Enter the index value of the list item that you want to select. Index starts at 1.

Yes

Integer


Example:

Consider a list containing names of countries. If it contains list items in the order "India", "England", "Australia" and user wishes to select "Australia", then this action can be used as follows:

SelectItemByIndex                         "3"

SelectItemByText

This action selects option specified in the parameter.  

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

itemName

Enter the item name you want to select. 

Yes

String


Example:

SelectItemByText           "Name"

SelectItemByValue

This action selects the item specified by value from the web list.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Value

Enter the value of the item which you want to select. 

Yes

String


Example:

SelectItemByValue           "Address 1"

SelectItems

This action selects particular item or items from a list. Multiple items for selection can be given only for the list box that has multi-selection property.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

item

Enter the name of the item that needs to be selected. Separate multiple items by carat (^) operator. 

No

Array


Example:

SelectItems                                         "England^India^Australia"

Consider a list containing names of countries. If it contains list items "India", "England", "Australia" and the user wishes to select "England", then this action can be used as follows. If an empty data ("" or $NULL$) is passed as the data, the action will be passed only if there exist an item "" in the webList to be selected.

SelectMultipleItemsByIndex

This action selects multiple items specified in the parameter. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

indices

Enter the indices of the items you want to select. Multiple items should be separated by (^) caret. Index starts from 1.

Yes

Array


Example:

SelectMultipleItemsByIndex                "1^2^4"

SendKeySequence

This action sends one or multiple keys specified in the parameters to the specified object. You may use the syntaxes mentioned below to send normal or modifier keys. Multiple keys should be separated by caret. 
Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

arrayofKeys

Enter the keys you want to send.

In case you want to send a string with modifier characters (from the table mentioned below) you must use caret (^) sign as a separator between modifier characters and normal string values.

Yes

Array

Adding modifiers like SHIFT, Control, and so forth perform the activity of pressing these keys only. For releasing these keys, you must add these modifiers again based on requirements as shown in the example.

Example:
sendKeySequence               "~{SHIFT~}^w^~{SHIFT~}^elcome"

The example above will press the word Welcome. Apart from the normal alphabets, you can also send the modifier keys. When sending modifier keys, you have to send them in the syntax given.

Key

Syntax

NULL

~{NULL~}

CANCEL (Esc)

~{CANCEL~}

HELP

~{HELP~}

BACK_SPACE

~{BACK_SPACE~}

TAB

~{TAB~}

CLEAR

~{CLEAR~}

RETURN

~{RETURN~}

ENTER

~{ENTER~}

SHIFT

~{SHIFT~}

LEFT_SHIFT(SHIFT)

~{LEFT_SHIFT~}

CONTROL

~{CONTROL~}

LEFT_CONTROL(CONTROL)

~{LEFT_CONTROL~}

ALT

~{ALT~}

LEFT_ALT

~{LEFT_ALT~}

PAUSE

~{PAUSE~}

ESCAPE

~{ESCAPE~}

SPACE

~{SPACE~}

PAGE_UP

~{PAGE_UP~}

PAGE_DOWN

~{PAGE_DOWN~}

END

~{END~}

HOME

~{HOME~}

LEFT

~{LEFT~}

ARROW_LEFT

~{ARROW_LEFT~}

UP

~{UP~}

ARROW_UP

~{ARROW_UP~}

RIGHT

~{RIGHT~}

ARROW_RIGHT

~{ARROW_RIGHT~}

DOWN

~{DOWN~}

ARROW_DOWN

~{ARROW_DOWN~}

INSERT

~{INSERT~}

DELETE

~{DELETE~}

SEMICOLON

~{SEMICOLON~}

EQUALS

~{EQUALS~}

NUMPAD0

~{NUMPAD0~}

NUMPAD1

~{NUMPAD1~}

NUMPAD2

~{NUMPAD2~}

NUMPAD3

~{NUMPAD3~}

NUMPAD4

~{NUMPAD4~}

NUMPAD5

~{NUMPAD5~}

NUMPAD6

~{NUMPAD6~}

NUMPAD7

~{NUMPAD7~}

NUMPAD8

~{NUMPAD8~}

NUMPAD9

~{NUMPAD9~}

MULTIPLY

~{MULTIPLY~}

ADD

~{ADD~}

SEPARATOR

~{SEPARATOR~}

SUBTRACT

~{SUNSTRACT~}

DECIMAL

~{DECIMAL~}

DIVIDE

~{DIVIDE~}

F1

~{F1~}

F2

~{F2~}

F3

~{F3~}

F4

~{F4~}

F5

~{F5~}

F6

~{F6~}

F7

~{F7~}

F8

~{F8~}

F9

~{F9~}

F10

~{F10~}

F11

~{F11~}

F12

~{F12~}

META

~{META~}

COMMAND (META)

~{COMMAND~}

ZENKAKU_HANKAKU

~{ZENKAKU_HANKAKU~}

CLICK

~{CLICK~}

DOUBLECLICK

~{DOUBLECLICK~}

RIGHTCLICK

~{CONTEXTCLICK~}

SetFocus

This action sets the focus on the specified object.

This action does not have any parameter. 

Example:

SetFocus

SetValueAttribute

This action sets the data specified in the 'value' attribute of the object.

Parameter Name

Parameter Description

Mandatory

Data Type

value

Enter the value to be added for the Value attribute.

Yes

String


Example:

SetValueAttribute           "#ff0990"

StoreChildCount

This action stores the child count of the specified object under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Key

Enter the key name under which the child count will be saved.

Yes

String


Example:

StoreChildCount                               "Key"

StoreCSSProperty

This action stores the CSS property value of the object under the specified key. Key value can be retrieved using the key name. 

Input Parameters:

Parameter Name

Parameter Desciption

Mandatory

Data Type

property

Enter the property name whose value you want to store.

Yes

String

keyProperty

Enter the key name under which the property value will be stored. 

Yes

String

Example:

StoreCSSProperty        "display"            "Key"

StoreExistence

This action stores existence of the object under the specified key. The key value can be retrieved using the key name. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Key

Enter the key name under which the existence's Boolean value will be stored. 

  • Stores True if the object exists.
  • Stores False if the object does not exist.

Yes

String


Example:

StoreExistence                               "Key"

StoreFirstSelectedItem

This action stores the first item under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

key

Enter the key name under which you want to store the item name. 

Yes

String


Example:

StoreFirstSelectedItem          "Key"

StoreItems

This action stores all the items from the specified list under the key name. Items are separated by carat (^) operator and can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

key

Enter the key name under which you want to store the items. 

Yes

String


Example:

Consider a list having the items like, Monday, Tuesday, Wednesday.

StoreItems                       "Key"

The items in the key will be stored as Monday^Tuesday^Wednesday.

StoreItemCount

This action stores the total number of elements existing in the specified web list object.

Input parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

key

Enter the key name under which the value will be stored. The value can be retrieved using the key name.

Yes

String

Example:

StoreItemCount          "Key"

StoreLocation

This action stores the current location of the object under the specified keys. The key values can be retrieved using the key names. 

Input Parameters:

Parameter Name

Parameter Desciption

Mandatory

Data Type

keyHeight

Enter the key name to store the height of the location of the object.

Yes

String

keyWidth

Enter the key name to store the width of the location of the object.

Yes

String

Example:

StoreLocation        "Height"            "Width"

StorePropertyValue

This action stores the property of the specified object under the key name. The stored key value can be retrieved using the key name.

Some Android and iOS properties are not accessible.

List of accessible properties for Android: "name", "contentDescription", "className", "resourceId", "text", "enabled", "checkable", "checked", "clickable", "focusable", "focused", "longClickable", "scrollable", "selected", "displayed"

List of accessible properties for iOS: "name", "value", "label", "hint"

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Key

Enter the key name under which the property value will be stored.

Yes

 String

Property

Property/attribute name whose value needs to be stored under the specified key. This can be any accessible property of Android/iOS native object mentioned above.

Yes

 String


Example:

StorePropertyValue                            "key"                     "text"

StoreSelectedItems

This action stores all the items of a list that are selected under the specified key. Multiple items are stored separated by carat (^) operator. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

key

Enter the key name under which you want to store the items. 

Yes

String

Example:
StoreSelectedItems                  "selectedItemsKey"

Consider a list having the items Monday, Tuesday, Wednesday, Thursday, Friday. Suppose Tuesday and Friday is selected in the list.

The items in the key will be stored as Tuesday^Friday

StoreSize

This action stores the size of the specified object under keys. The key values can be retrieved using key names.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

keyXPosition

Enter the key name under which you want to store the height of the object.

Yes

String

keyYPosition

Enter the key name under which you want to store the width of the object.

Yes

String

Example:

StoreSize           "Height"                   "Width"

StoreText

This action stores the text existing inside the specified object under the specified keys. The key values can be retrieved using the key names. 

Input Parameters:

Parameter Name

Parameter Desciption

Mandatory

Data Type

keyText

Enter the key name to store the text from the specified object.

Yes

String

Example:
StoreText        "Key" 

StoreValueAttribute

This action stores the data present in the 'value' attribute of the object.

Parameter Name

Parameter Description

Mandatory

Data Type

key

Enter the key name under which the value will be stored. Enter the value to be added for the Value attribute.Key value can be retried using the key name.

Yes

String

Example:
StoreValueAttribute        "Key"

VerifyEnability

This action verifies the enability of the specified object. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

enability

Value for this parameters can be true or false.

  • Set True if you want to verify that the object is enabled. 
  • Set False if you want to verify that the object is disabled.

Yes

String

Example:

VerifyEnability                          "True"

VerifyExistence

This action verifies the existence of the specified object. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

existence

Value for this parameters can be true or false.

  • Set True if you want to check the existence.
  • Set False if you want to check the non-existence.

Yes

String

Example:

VerifyExistence                      "True"

VerifyItemsExist

This action verifies the existence of the objects in the specified list. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

items

Enter the items for which you want too check the existence. Separate multiple items by carat (^) operator. 

Yes

Array

existence

Value of this parameter can be either true or false.

  • Set true if you want to check the object existence.
  • Set false if you want to check the object non-existence. 

Yes

String

Example:

Consider a list containing names of countries "India", "Australia", "England", "South Africa". If the user wishes to verify if India, England, South Africa are in the list, then this action can be used as follows:

VerifyItemsExist            "India^South Africa^England"           "true"

  1. "^" in Qualitia is a delimiter for items in an array.
  2. If an empty data ("" or $NULL$) is passed as the data, the action will passed only if there exist an "" item in the webList.

VerifyItemsInSequence

This action verifies the actual sequence of items in the specified list box with the expected items' sequence.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

items

Enter the list of items in expected sequence. Separate multiple items by carat (^) operator. 

Yes

Array

Example:

Consider a list containing names of countries. If it contains list items in the order "India", "England", "Australia" , "SA" then to verify a sequence in the list, this action can be used as follows:

VerifyItemsInSequence                "India^England^Australia^SA"

VerifyNoItemsDuplication

This action verifies that no items are duplicated in the list.

Example:

VerifyNoItemsDulication

Consider a list having the items Monday, Tuesday, Wednesday, Monday

The action will fail because the if the list contains duplicate item "Monday"

VerifySelectedItems

This action verifies the selected items with the expected items list.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

items

Enter the list items that are expected to be selected from the list box. Separate multiple items by carat (^) operator.

Yes

Array

Example:

Consider a list containing names of countries. If it contains list items in the order "India", "England", "Australia" , "SA" , if India and England are selected and this needs to be verified, the this action can be used as follows

VerifySelectedItems                                       "India^England"

If an empty data ("" or $NULL$) is passed as the data, the action will passed only if there exist an "" selected item in the webList.

VerifySize

This action compares the actual number of items (size) from the specified list box with the expected number of items (size).

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

expectedSize

Enter the expected size of the list box that will be compared with the actual size of the list box.
The data type of this parameter is Numeric.

Yes

String

Example:

If a list contains the items "India","England,"S.A", then to verify its size this action can be used as follows.

VerifyListBoxSize                         "3"

VerifyVisibility

This action verifies the visibility of the specified object.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

visibility

Value for this parameters can be true or false.

  • Set True if you want to check the visibility.
  • Set False if you want to check the invisibility.

Yes

String

Example:

VerifyVisibility                      "True"

WaitForAttributeContains

This action waits till the value of the specified attribute changes to the expected partial value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.  

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

attributeName

Enter the attribute name whose value you want to check.

Yes

String

attributeValue 

Enter the partial expected partial attribute value.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the expected value. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout. 

No

String

keyAttributeValueContains

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForAttributeContains      "id"           "we323es"        "5"          "500"     "Key"       "Defect"

WaitForAttributeNotContains

This action waits until the specified attribute's value of the object changes to other than the partial parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.   

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

attributeName

Enter the attribute name whose value you want to check.

Yes

String

attributeValue 

Enter the value which should not be there in the attribute value.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the value to change. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for existence of the unexpected value before exhausting timeout.

No

String

keyAttributeValue

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:
WaitForAttributeValueContains      "id"           "232waf"        "5"          "500"     "Key"       "Defect"

WaitForAttributeNotToBe

This action waits until the specified attribute's value of the object changes to other than the exact parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.  

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

attributeName

Enter the attribute name whose value you want to check.

Yes

String

attributeValue 

Enter the value which should not be there in the attribute value.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the value to change. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout. 

No

String

keyAttributeValueNotToBe

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:
WaitForAttributeNotToBe      "id"           "232waf"        "5"          "500"     "Key"       "Defect"

WaitForAttributeNotToBeEmpty

This action waits until the specified attribute's value of the object gets filled with some value. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

attributeName

Enter the attribute name whose value you want to check.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the attribute value.  

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the attribute value before exhausting timeout. 

No

String

keyAttributeValue

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:
WaitForAttributeNotToBeEmpty      "id"           "5"          "500"     "Key"       "Defect"

WaitForAttributeToBe

This action waits till the value of the specified attribute changes to the exact expected value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.   

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

attributeName

Enter the attribute name whose value you want to check.

Yes

String

attributeValue 

Enter the exact expected value.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the expected value. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout. 

No

String

keyAttributeValue

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:
WaitForAttributeToBe         "id"           "232waf"        "5"          "500"     "Key"       "Defect"

WaitForAttributeToBeEmpty

This action waits until the specified attribute's value of the object gets empty. You may specify the timeout and polling interval, if required.  

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

attributeName

Enter the attribute name whose value you want to check.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the attribute value to be empty.  

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the attribute value before exhausting timeout. 

No

String

keyAttributeValue

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForAttributeToBeEmpty      "id"           "5"          "500"     "Key"       "Defect"

WaitForChildElement

This action waits for the child elements of the specified object to appear. You may specify the timeout and polling interval, if required.
Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

childLocatorType

Enter the locator type of the object whose child you want to check.

Yes

String

childLocatorValue

Enter the locator value of the child you want to check. 

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the elements to appear. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. 

No

String

keyExistence

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForChildElement      "id"       "2"         "5"          "500"     "Key"       "Defect"

WaitForClickability

This action waits for the specified object to be clickable. You may specify the timeout and polling interval, if required.  

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the object to be clickable.   

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the object clickability before exhausting timeout. 

No

String

keyClickability

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForClickability     "5"          "500"     "Key"       "Defect"

WaitForExistence

This action waits for the existence of the specified object. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the existence of the object.   

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the existence of the object before exhausting timeout. 

No

String

keyExistence

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:
WaitForExistence     "5"          "500"     "Key"       "Defect"

WaitForInnerTextContains

This action waits for the object to contain the expected partial text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

innerText

Enter the expected text you want to wait for.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the expected text.   

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. 

No

String

keyInnerTextContains

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForInnerTextContains          "Connect"       "5"       "500"     "Key"       "Defect"

WaitForInnerTextMatchesPattern

This action waits for inner text from the specified object to match the expected text regular expression pattern. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

innerTextRegXPattern

Enter the expected pattern for the inner text. Pattern should be regular expression. Step fails in case the pattern is invalid.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the expected text.   

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. 

No

String

keyInnerText

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForInnerTextMatchesPattern           ".[My]text."       "5"       "500"     "Key"       "Defect"

WaitForInnerTextNotContains

This action waits until the specified attribute's value of the object changes to other than the parameterized value. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

innerText

Enter the text which should not be there in the attribute value. 

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the inner text to disappear.    

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the expected text to be disappeared before exhausting timeout. 

No

String

keyInnerTextNotContains

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForInnerTextNotContains          "Connect"       "5"       "500"     "Key"       "Defect"

WaitForInnerTextNotToBe

This action waits till the inner text of the object changes from the specified text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

innerText

Enter the text which should not be there in the object.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the text to change.   

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. 

No

String

keyInnerTextNotToBe

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForInnerTextNotToBe          "Connect"       "5"       "500"     "Key"       "Defect"

WaitForInnerTextToBe

This action waits for the object to contain the expected exact text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

innerText

Enter the expected text you want to wait for.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the expected text.   

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. 

No

String

keyInnerText

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:
WaitForInnerTextToBe          "Connect"       "5"       "500"     "Key"       "Defect"

WaitForInvisibility

This action waits for the object to invisible. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the object to go invisible.    

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the invisibility before exhausting timeout. 

No

String

keyInvisibility

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:
WaitForInvisibility     "5"          "500"     "Key"       "Defect"

WaitForNonClickability

This object waits for the object to become non clickable. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the object to become non clickable.     

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the clickability before exhausting timeout. 

No

String

keyNonClickability

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForNonClickability      "5"          "500"     "Key"       "Defect"

WaitForNonExistence

This action waits for the non existence of the specified object. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the non existence of the object.   

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for non existence of the object before exhausting timeout. 

No

String

keyNonExistence

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:
WaitForNonExistence     "5"          "500"     "Key"       "Defect"

WaitForNumberOfElementsToBe

This action waits for the number of elements of the specified object locator on the page to be same as the expected number. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

number

Enter the expected number of elements to wait for.

Yes

Integer

timeOut

Enter the timeout (in seconds) to wait for the number elements to appear. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. 

No

String

keyNumberOfElements

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForNumberOfElementsToBe       "2"         "5"          "500"     "Key"       "Defect"

WaitForNumberOfElementsToBeLessThan

This action waits for the number of elements of the specified object locator on the page to be less than the specified number. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

expectedNumOfElements

Enter the expected number of elements to wait for.

Yes

String

timeOut

Enter the timeout (in seconds) to wait for the number elements to appear. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. 

No

Integer

keyNumOfElementsLessThan

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForNumberOfElementsToBeLessThan       "2"         "5"          "500"     "Key"       "Defect"

WaitForNumberOfElementsToBeMoreThan

This action waits for the number of elements of the specified object locator on the page to be more than the specified number. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

expectedNumOfElements

Enter the expected number of elements to wait for.

Yes

Integer

timeOut

Enter the timeout (in seconds) to wait for the number elements to appear. 

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. 

No

String

keyNumOfElementsLessThan

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForNumberOfElementsToBeMoreThan       "2"         "5"          "500"     "Key"       "Defect"

WaitForSelection

This action waits till the specified object gets selected. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the object to get selected.     

No

Integer

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the selection of the object before exhausting timeout. 

No

Integer

keySelection

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect.

No

String

Example:

WaitForSelection      "5"          "500"     "Key"       "Defect"

WaitForSelectionStateToBe

This action waits for the object to go to the specified state. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

expectedSelectionState

Enter the expected selection state. Set True for selection and False for deselection.

Yes

Boolean

timeOut

Enter the timeout (in seconds) to wait for the object to get selected.     

No

Integer

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the selection of the object before exhausting timeout. 

No

Integer

keySelectionState

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect.

No

String

Example:

WaitForSelectionStateToBe          "False"        "5"          "500"       "Key"       "Defect"

WaitForStaleness

This action waits until the element gets detached from the DOM. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the value to be detached.  

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for existence of the element before exhausting timeout. 

No

String

keyStatus

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForStaleness        "5"          "500"     "Key"       "Defect"

WaitForVisibility

This action waits for the object to be visible. You may specify the timeout and polling interval, if required. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

timeOut

Enter the timeout (in seconds) to wait for the object visibility.    

No

String

pollingInterval

Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. 

No

String

keyVisibility

Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

No

String

statusIfConditionNotSatisfied

Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

No

String

Example:

WaitForVisibility     "5"          "500"     "Key"       "Defect"

ClickAndWait (Deprecated)

This action clicks the specified object and waits for the seconds specified in Sync Time under the Configuration Settings (Execution) window.

Default value is 20 seconds. If the page loads before reaching the maximum sync time execution continues to the next steps. 

This action does not have any parameter. 

Example:

ClickAndWait

Webdriver waits for the document to come in ready state. If it is in ready state it is assumed that the page is loaded completely and Webdriver stops waiting. The condition to wait till the document to load in ready state and assume that the page is loaded could however not work as expected at all times.

WaitForObject (Deprecated)

This action waits for the object to appear or disappear for the maximum number of seconds specified.

If the object is found or not found before the maximum time specified, execution continues to the next steps.

If the wait time is "" then the wait time shall be the "Sync Time" set under the Configuration Settings (Execution) window.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

waitTime

Enter the number of seconds to wait for the object to appear or disappear. This has to be 0 or any positive number.

Yes

String

existence

Value for this parameter can be true or false.

  • Set true if you want to check for the appearance of the object.
  • Set false if you want to check for the disappearance of the object.

Yes

String

Example:

WaitForObject           "10"            "true"

The action waits for maximum 10 seconds for the object to appear. If the object appears before 10 seconds elapses, execution continues to the next steps.

WaitForObject         "15"          "False"

The action shall wait for maximum 15 seconds for the object to disappear. If the object disappears before 15 seconds elapses,execution continues to the next steps.