StorePropertyValue

This action stores the property of the specified object under the key name. The stored key value can be retrieved using the key name.

Some Android and iOS properties are not accessible.

List of accessible properties for Android: "name", "contentDescription", "className", "resourceId", "text", "enabled", "checkable", "checked", "clickable", "focusable", "focused", "longClickable", "scrollable", "selected", "displayed"

List of accessible properties for iOS: "name", "value", "label", "hint"

Input Parameters:

ParameterName	Parameter Description	Mandatory	Data Type
Key	Enter the key name under which the property value will be stored.	Yes	String
Property	Property/attribute name whose value needs to be stored under the specified key. This can be any accessible property of Android/iOS native object mentioned above.	Yes	String

Example: StorePropertyValue "key" "text"

StoreVisibility

This action stores visibility of the mobile object under the specified key. The key value can be retrieved using the key name.
Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strKey	The visibility value for the mobile object is stored as: True denotes the object is visible False denotes the object is not visible	No	String

Parameter Name

Parameter Description

Mandatory

Data Type

strKey

The visibility value for the mobile object is stored as:

True denotes the object is visible
False denotes the object is not visible

String

Example:
StoreVisibility "Key"

Swipe

This action performs swipe and finds object until timeout occurs.

Input Parameters:

ParameterName	Parameter Description	Mandatory	Data Type
upDownLeftRight	Enter the direction of swipe: Up: Move finger from down to up on the device screen. Down: Move finger from up to down on the device screen. Left: Move finger from right to left on the device screen. Right: Move finger from left to right on the device screen.	No	String
timeoutInSeconds	Enter the timeout in seconds.	No	String
swipePageInSeconds	Enter in how many seconds one page should be swiped. Default is 1 second. Use this parameter with caution only when control on swipe speed is required.	No	String

ParameterName

Parameter Description

Mandatory

Data Type

upDownLeftRight

Enter the direction of swipe:

Up: Move finger from down to up on the device screen.
Down: Move finger from up to down on the device screen.
Left: Move finger from right to left on the device screen.
Right: Move finger from left to right on the device screen.

String

timeoutInSeconds

Enter the timeout in seconds.

String

swipePageInSeconds

Enter in how many seconds one page should be swiped. Default is 1 second.
Use this parameter with caution only when control on swipe speed is required.

String

Example:

Swipe "up" "10" "1"

VerifyEnability

This action verifies the enability of the specified object.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
enability	Value for this parameter can be true or false. Set True if you want to verify that the object is enabled. Set False if you want to verify that the object is disabled. Note: If you do not enter any value, the default value is set to True during the test case execution.	No	String

Parameter Name

Parameter Description

Mandatory

Data Type

enability

Value for this parameter can be true or false.

Set True if you want to verify that the object is enabled.
Set False if you want to verify that the object is disabled.
Note: If you do not enter any value, the default value is set to True during the test case execution.

String

Example:

VerifyEnability "True"

VerifyExistence

This action verifies the existence of the specified object.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
existence	Value for this parameter can be true or false. Set True if you want to check the existence. Set False if you want to check the non-existence.	Yes	String

Parameter Name

Parameter Description

Mandatory

Data Type

existence

Value for this parameter can be true or false.

Set True if you want to check the existence.
Set False if you want to check the non-existence.

Yes

String

Example: VerifyExistence "True"

WaitForObject (Deprecated)

This action waits for the object to appear or disappear for the maximum number of seconds specified.

If the object is found or not found before the maximum time specified, execution continues to the next steps.

If the wait time is "" then the wait time shall be the "Sync Time" set in the asso.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
waitTime	Enter the number of seconds to wait for the object to appear or disappear. This has to be 0 or any positive number.	Yes	String
existence	Value for this parameter can be true or false. Set true if you want to check for the appearance of the object. Set false if you want to check for the disappearance of the object.	Yes	String

Parameter Name

Parameter Description

Mandatory

Data Type

waitTime

Enter the number of seconds to wait for the object to appear or disappear. This has to be 0 or any positive number.

Yes

String

existence

Value for this parameter can be true or false.

Set true if you want to check for the appearance of the object.
Set false if you want to check for the disappearance of the object.

Yes

String

Example:

WaitForObject "10" "true"

The action waits for maximum 10 seconds for the object to appear. If the object appears before 10 seconds elapses, execution continues to the next steps.

WaitForObject "15" "False"

The action shall wait for maximum 15 seconds for the object to disappear. If the object disappears before 15 seconds elapses,execution continues to the next steps.

Click

LongPress

On this page:

StorePropertyValue

StoreVisibility

Swipe

VerifyEnability

VerifyExistence

WaitForObject (Deprecated)

Browser not supported