Macro lookup error: excerpt "DownloadFile" was not found on page "WebButton Actions" (with ID 221643190) in space "QFWM".
If you're experiencing issues please see our Troubleshooting Guide.
Macro lookup error: excerpt "StorePropertyValue" was not found on page "WebButton Actions" (with ID 221643190) in space "QFWM".
If you're experiencing issues please see our Troubleshooting Guide.
Macro lookup error: excerpt "MouseOver" was not found on page "WebButton Actions" (with ID 221643190) in space "QFWM".
If you're experiencing issues please see our Troubleshooting Guide.
Macro lookup error: excerpt "MouseDown" was not found on page "WebButton Actions" (with ID 221643190) in space "QFWM".
If you're experiencing issues please see our Troubleshooting Guide.
Macro lookup error: excerpt "MouseUp" was not found on page "WebButton Actions" (with ID 221643190) in space "QFWM".
If you're experiencing issues please see our Troubleshooting Guide.
Macro lookup error: excerpt "ClickAt" was not found on page "WebButton Actions" (with ID 221643190) in space "QFWM".
If you're experiencing issues please see our Troubleshooting Guide.
Macro lookup error: excerpt "SetFocus" was not found on page "WebButton Actions" (with ID 221643190) in space "QFWM".
If you're experiencing issues please see our Troubleshooting Guide.
DoubleClick
This action double-clicks the specified web element.
Example:
DoubleClick
RightClick
This action right-clicks the specified web element.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
option | The context menu option number that needs to be clicked. | Yes | String |
Example:
RightClick "3''
This will select the third option from the context-menu.
Macro lookup error: excerpt "WaitForObject" was not found on page "WebButton Actions" (with ID 221643190) in space "QFWM".
If you're experiencing issues please see our Troubleshooting Guide.
Macro lookup error: excerpt "ClickAndWait" was not found on page "WebButton Actions" (with ID 221643190) in space "QFWM".
If you're experiencing issues please see our Troubleshooting Guide.
DragAndDrop
This action drags and drops the specified web element at the specified location.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
offsetX | Enter the offset in pixels from the current location to which the element should be moved. The offset parameter can be as +100,100 , -100, 10, and so on. | Yes | String |
offsetY | Enter the offset in pixels from the current location to which the element should be moved. The offset parameter can be as -100,100 , +100, and so on. | Yes | String |
Example:
DragAndDrop "100" "500"
Macro lookup error: excerpt "StoreExistence" was not found on page "WebButton Actions" (with ID 221643190) in space "QFWM".
If you're experiencing issues please see our Troubleshooting Guide.
Macro lookup error: excerpt "StoreChildCount-withoutlocator" was not found on page "WebButton Actions" (with ID 221643190) in space "QFWM".
If you're experiencing issues please see our Troubleshooting Guide.
Macro lookup error: excerpt "ScrollIntoView" was not found on page "WebButton Actions" (with ID 221643190) in space "QFWM".
If you're experiencing issues please see our Troubleshooting Guide.
Macro lookup error: excerpt "ClickJS" was not found on page "WebButton Actions" (with ID 221643190) in space "QFWM".
If you're experiencing issues please see our Troubleshooting Guide.
Macro lookup error: excerpt "ActionClick" was not found on page "WebButton Actions" (with ID 221643190) in space "QFWM".
If you're experiencing issues please see our Troubleshooting Guide.
New Actions
This action stores the text existing inside the specified object under the specified keys. The key values can be retrieved using the key names. Input Parameters: Example: StoreText "Key" This action stores the current location of the object under the specified keys. The key values can be retrieved using the key names. Input Parameters: Example: StoreLocation "XPosition" "YPosition" This action stores the CSS property value of the object under the specified key. Key value can be retrieved using the key name. Input Parameters: Example: StoreCSSProperty "Key" "display" This action stores the size of the specified object under keys. The key values can be retrieved using key names. Input Parameters: Example: StoreSize "Height" "Width" This action waits until the element gets detached from the DOM. Input Parameters: Example: WaitForStaleness "5" "500" "Key" "Defect" This action waits till the value of the specified attribute changes to the expected partial value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForAttributeValueContains "id" "we323es" "5" "500" "Key" "Defect" This action waits until the specified attribute's value of the object changes to other than the partial parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForAttributeValueNotContains "id" "232waf" "5" "500" "Key" "Defect" This action waits till the value of the specified attribute changes to the exact expected value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForAttributeValueToBe "id" "232waf" "5" "500" "Key" "Defect" This action waits until the specified attribute's value of the object changes to other than the exact parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForAttributeValueNotToBe "id" "232waf" "5" "500" "Key" "Defect" This action waits until the specified attribute's value of the object gets filled with some value. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForAttributeValueNotToBeEmpty "id" "5" "500" "Key" "Defect" This action waits until the specified attribute's value of the object gets empty. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForAttributeValueToBeEmpty "id" "5" "500" "Key" "Defect" This action waits for the specified object to be clickable. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForClickability "5" "500" "Key" "Defect" This action waits for the existence of the specified object. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForExistence "5" "500" "Key" "Defect" This action waits for the object to contain the expected partial text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForInnerTextContains "Connect" "5" "500" "Key" "Defect" This action waits for inner text from the specified object to match the expected text regular expression pattern. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. Input Parameters: Enter the expected pattern for the inner text. Pattern should be regular expression. Step fails in case the pattern is invalid. Example: WaitForInnerTextMatchesPattern ".*[My]text.*" "5" "500" "Key" "Defect" This action waits until the specified attribute's value of the object changes to other than the parameterized value. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForInnerTextNotContains "Connect" "5" "500" "Key" "Defect" This action waits till the inner text of the object changes from the specified text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForInnerTextNotToBe "Connect" "5" "500" "Key" "Defect" This action waits for the object to contain the expected exact text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForInnerTextToBe "Connect" "5" "500" "Key" "Defect" This action waits for the object to invisible. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForInvisibility "5" "500" "Key" "Defect" This object waits for the object to become non clickable. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForNonClickability "5" "500" "Key" "Defect" This action waits for the non existence of the specified object. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForNonExistence "5" "500" "Key" "Defect" This action waits till the specified object gets selected. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForSelection "5" "500" "Key" "Defect" This action waits for the object to go to the specified state. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForSelectionStateToBe "False" "5" "500" "Key" "Defect" This action waits for the object to be visible. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForVisibility "5" "500" "Key" "Defect" This action waits for the number of elements of the specified object locator on the page to be same as the expected number. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForNumberOfElementsToBe "2" "5" "500" "Key" "Defect" This action waits for the number of elements of the specified object locator on the page to be less than the specified number. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForNumberOfElementsToBeLessThan "2" "5" "500" "Key" "Defect" This action waits for the number of elements of the specified object locator on the page to be more than the specified number. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForNumberOfElementsToBeMoreThan "2" "5" "500" "Key" "Defect" This action waits for the child elements of the specified object to appear. You may specify the timeout and polling interval, if required. Input Parameters: Example: WaitForChildElement "2" "5" "500" "Key" "Defect"StoreText
Parameter Name Parameter Desciption Mandatory Data Type keyText Enter the key name to store the text from the specified object. Yes String StoreLocation
Parameter Name Parameter Desciption Mandatory Data Type keyX Enter the key name to store the X coordinate of the position of the object. Yes String KeyY Enter the key name to store the Y coordinate of the position of the object. Yes String StoreCSSProperty
Parameter Name Parameter Desciption Mandatory Data Type Property Enter the property name whose value you want to store. Yes String KeyProperty Enter the key name under which the property value will be stored. Yes String StoreSize
Parameter Name Parameter Description Mandatory Data Type keyHeight Enter the key name under which you want to store the height of the object. Yes String KeyWidth Enter the key name under which you want to store the width of the object. Yes String WaitForStaleness
Parameter Name Parameter Description Mandatory Data Type timeOut Enter the timeout (in seconds) to wait for the value to be detached. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for existence of the element before exhausting timeout. No Integer keyStatus Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForAttributeValueContains
Parameter Name Parameter Description Mandatory Data Type attributeName Enter the attribute name whose value you want to check. Yes String attributeValue Enter the partial expected partial attribute value. Yes String timeOut Enter the timeout (in seconds) to wait for the expected value. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout. No Integer Key_AttributeValueContains Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForAttributeValueNotContains
Parameter Name Parameter Description Mandatory Data Type attributeName Enter the attribute name whose value you want to check. Yes String attributeValue Enter the value which should not be there in the attribute value. Yes String timeOut Enter the timeout (in seconds) to wait for the value to change. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for existence of the unexpected value before exhausting timeout. No Integer Key_AttributeValue Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForAttributeValueToBe
Parameter Name Parameter Description Mandatory Data Type attributeName Enter the attribute name whose value you want to check. Yes String attributeValue Enter the exact expected value. Yes String timeOut Enter the timeout (in seconds) to wait for the expected value. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout. No Integer Key_AttributeValue Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForAttributeValueNotToBe
Parameter Name Parameter Description Mandatory Data Type attributeName Enter the attribute name whose value you want to check. Yes String attributeValue Enter the value which should not be there in the attribute value. Yes String timeOut Enter the timeout (in seconds) to wait for the value to change. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout. No Integer Key_AttributeValueNotToBe Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForAttributeValueNotToBeEmpty
Parameter Name Parameter Description Mandatory Data Type attributeName Enter the attribute name whose value you want to check. Yes String timeOut Enter the timeout (in seconds) to wait for the attribute value. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the attribute value before exhausting timeout. No Integer Key_AttributeValue Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForAttributeValueToBeEmpty
Parameter Name Parameter Description Mandatory Data Type attributeName Enter the attribute name whose value you want to check. Yes String timeOut Enter the timeout (in seconds) to wait for the attribute value to be empty. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the attribute value before exhausting timeout. No Integer Key_AttributeValue Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForClickability
Parameter Name Parameter Description Mandatory Data Type timeOut Enter the timeout (in seconds) to wait for the object to be clickable. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the object clickability before exhausting timeout. No Integer Key_Clickability Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForExistence
Parameter Name Parameter Description Mandatory Data Type timeOut Enter the timeout (in seconds) to wait for the existence of the object. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the existence of the object before exhausting timeout. No Integer Key_Existence Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForInnerTextContains
Parameter Name Parameter Description Mandatory Data Type innerText Enter the expected text you want to wait for. Yes String timeOut Enter the timeout (in seconds) to wait for the expected text. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. No Integer Key_InnerTextContains Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForInnerTextMatchesPattern
Parameter Name Parameter Description Mandatory Data Type innerTextRegXPattern Yes String timeOut Enter the timeout (in seconds) to wait for the expected text. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. No Integer Key_InnerText Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForInnerTextNotContains
Parameter Name Parameter Description Mandatory Data Type innerText Enter the text which should not be there in the attribute value. Yes String timeOut Enter the timeout (in seconds) to wait for the inner text to disappear. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the expected text to be disappeared before exhausting timeout. No Integer Key_InnerTextNotContains Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForInnerTextNotToBe
Parameter Name Parameter Description Mandatory Data Type innerText Enter the text which should not be there in the object. Yes String timeOut Enter the timeout (in seconds) to wait for the text to change. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. No Integer Key_InnerTextNotToBe Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForInnerTextToBe
Parameter Name Parameter Description Mandatory Data Type innerText Enter the expected text you want to wait for. Yes String timeOut Enter the timeout (in seconds) to wait for the expected text. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. No Integer Key_InnerText Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForInvisibility
Parameter Name Parameter Description Mandatory Data Type timeOut Enter the timeout (in seconds) to wait for the object to go invisible. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the invisibility before exhausting timeout. No Integer Key_Invisibility Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForNonClickability
Parameter Name Parameter Description Mandatory Data Type timeOut Enter the timeout (in seconds) to wait for the object to become non clickable. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the clickability before exhausting timeout. No Integer Key_NonClickability Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForNonExistence
Parameter Name Parameter Description Mandatory Data Type timeOut Enter the timeout (in seconds) to wait for the non existence of the object. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for non existence of the object before exhausting timeout. No Integer Key_NonExistence Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForSelection
Parameter Name Parameter Description Mandatory Data Type timeOut Enter the timeout (in seconds) to wait for the object to get selected. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the selection of the object before exhausting timeout. No Integer Key_Selection Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForSelectionStateToBe
Parameter Name Parameter Description Mandatory Data Type expectedSelectionState Enter the expected selection state. Set True for selection and False for deselection. Yes Boolean timeOut Enter the timeout (in seconds) to wait for the object to get selected. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the selection of the object before exhausting timeout. No Integer Key_SelectionState Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForVisibility
Parameter Name Parameter Description Mandatory Data Type timeOut Enter the timeout (in seconds) to wait for the object visibility. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. No Integer Key_Visibility Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForNumberOfElementsToBe
Parameter Name Parameter Description Mandatory Data Type number Enter the expected number of elements to wait for. Yes Integer timeOut Enter the timeout (in seconds) to wait for the number elements to appear. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. No Integer Key_NumberOfElements Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForNumberOfElementsToBeLessThan
Parameter Name Parameter Description Mandatory Data Type number Enter the expected number of elements to wait for. Yes Integer timeOut Enter the timeout (in seconds) to wait for the number elements to appear. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. No Integer Key_NumOfElementsLessThan Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForNumberOfElementsToBeMoreThan
Parameter Name Parameter Description Mandatory Data Type number Enter the expected number of elements to wait for. Yes Integer timeOut Enter the timeout (in seconds) to wait for the number elements to appear. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. No Integer Key_NumOfElementsLessThan Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String WaitForChildElement
Parameter Name Parameter Description Mandatory Data Type childLocatorType Enter the locator type of the object whose child you want to check. Yes String childLocatorValue Enter the locator value of the child you want to check. Yes String timeOut Enter the timeout (in seconds) to wait for the elements to appear. No Integer pollingInterval Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. No Integer Key_Existence Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. No String statusIfConditionNotSatisfied Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect. No String
