Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

On this page:

Offline Suite Execution for the Web and Mobile Applications

An offline suite present in a shared drive can be executed for web and mobile applications in one of the following ways:

  • Mapping the shared drive to the local computer

  • Not mapping the shared drive to the local computer

Executing an Offline Suite by Mapping the Shared Drive to the Local Computer

Qualitia recommends mapping of the shared drive with the local computer for an offline suite execution.

Perform the following steps:

  1. Copy the offline package along with the offline suite to the shared drive with the read and write access.

  2. Map the shared drive to the local computer.

  3. Configure the offline suite as per the requirements. For more detailed instructions, refer

  4. Do one of the following: 

    1. Open the Command Prompt, navigate to the mapped drive location that contains the offline package and suite, and then execute the offline package using the command line.
      For more detailed instructions, refer to Offline Package .

    2. Open the mapped drive, and double-click the offline package (8.0.x jar).

Executing an Offline Suite by Not Mapping the Shared Drive to the Local Computer

Perform the following steps:

  1. Copy the offline package along with the offline suite to the shared drive with the read and write access.

  2. Open the shared location, and double-click the offline package (8.0.x jar).
    Note: You cannot execute an offline package using the Command Prompt by specifying the complete UNC (Shared location).

Offline Suite Execution for the Desktop Applications on a Shared Drive

An offline suite present in a shared drive can be executed for a desktop application.

Before you execute an offline suite for a desktop application, ensure that you have:

  1. Installed UFT on the same computer from where you would perform the offline suite execution

  2. Mapped the shared drive to the local computer

  3. Copied the offline package to the shared drive with the read and write access

  4. Copied the TSR file in the local or shared drive and ensure that you have access to it

Perform the following steps:

  1. Configure the offline suite as per the requirements. For more detailed instructions, Configuring the System Execution Profile Settings for a Desktop Project.

  2. Do one of the following: 

    • Open the Command Prompt, navigate to the mapped drive location that contains the offline package and offline suite, and then execute the offline suite using the command line.
      For more detailed instructions, refer to Configuring Qualitia Settings .

    • Navigate to the mapped drive location that contains the offline package and the offline suite, and double-click the offline package (8.0.x jar).

  • No labels