...
Click
ClickCellWithCellText
ScrollAndStoreRowCount
SortColumnData
StoreCellText
StoreExistence
StoreRowNumberOfCellText
StoreRowNumberOfMultipleCellText
VerifyCellText
VerifyRowData
WaitForCellChildElement
WaitForCellClickability
WaitForCellNonClickability
WaitForCellExistence
WaitForCellInnerTextContains
WaitForCellInnerTextNotContains
WaitForCellInnerTextMatchesPattern
WaitForCellInnerTextToBe
WaitForCellInnerTextNotToBe
WaitForCellVisibilty
WaitForCellInvisibilty
WaitForCellNonExistence
WaitForCellSelection
WaitForCellSelectStateToBe
WaitForCellStaleness
StoreRowNumberOfCellText
VerifyPropertyValue
StorePropertyValue
MouseOver
VerifyExistence
VerifyEnability
VerifyVisibility
...
Click
ClickCellWithCellText
...
This action scrolls till the last row and stores the total row count of the table.
SortColumnData
This action sorts the data when the user clicks on heading cell of any particular column.
StoreCellText
StoreExistence
This action stores existence of the object under the specified key. The key value can be retrieved using the key name.
Input Parametersclicks on cell according to the provided cell data, rowNumber and columnNumber.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|---|---|---|
cellText | Enter the text of the cell. | Yes | String |
rowNumber | Enter the index of the row. | Yes | String |
columnNumber | Enter the index of the column. | Yes | String |
Example:
ClickCellWithCellText “Test1” “5” “1”
ScrollAndStoreRowCount
This action scrolls till the last row and stores the total row count of the table.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|
key | Enter the key |
in which the |
row count will be stored. |
Stores True if the object exists.
Stores False if the object does not exist.
Yes | String |
Example:
StoreExistence "Key"
StoreRowNumberOfCellText
ScrollAndStoreRowCount “key_1”
SortColumnData
This action sorts the data when the user clicks on heading cell of any particular column.
Input Parameters:
key
Parameter Name | Parameter Description | Mandatory | Data Type |
---|
text
Yes
String
Column Number
No
Number
columnName | Enter the name of the column. | Yes | String |
StoreRowNumberOfMultipleCellText
Input Parameters:
sortOrder | Enter the direction in which the data needs to be sorted. 1 indicates ascending order and 2 indicates descending order. | No | String |
Example:
SortColumnData “Account Name” “1”
StoreCellText
This action stores the cell data in key of the provided row number and column number.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|
text
rowNumber | Enter the index of the row. | Yes | String |
columnNumber | Enter the index of the column. | Yes |
String | |||
key | Enter the key in which the row count will be stored. | Yes | String |
VerifyRowData
Input ParametersExample:
...
Parameter Name
...
Parameter Description
...
Mandatory
...
Data Type
...
Value
...
Yes
...
String
...
Row
...
Yes
...
Number
...
Column
...
Yes
...
String
WaitForCellChildElement
This action waits for the cell to contain child element until timeout expires. If object is not found in the DOM, step status will fail. If key is provided, status will be stored in key. The status depends on the statusIfConditionNotSatisfied parameter.
Input Parameters:
...
Parameter Name
StoreCellText “1” “3” “key_2”
StoreExistence
This action stores existence of the object under the specified key. The key value can be retrieved using the key name.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|---|---|---|
Key | Enter the key name under which the existence's Boolean value will be stored.
| Yes | String |
Example:
StoreExistence "Key"
StoreRowNumberOfCellText
This action stores row number of the provided cell text.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|
childLocatorType
Yes
String
text | Enter the text of the cell. | Yes | String |
rowNumber
String
columnNumber |
Yes
String
timeOut
Enter the index of the column. | No |
Number |
pollingInterval
No
String
keyExistence
No
String
statusIfConditionNotSatisfied
No
String
WaitForCellClickability
...
key | This will return the row number. | Yes | String |
Example:
StoreRowNumberOfCellText "Test1" “1” “key_3”
StoreRowNumberOfMultipleCellText
This action stores the row number with provided cell texts and column numbers, and the value is stored in the key.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|
timeOut
No
String
rowNumber
Yes
String
columnNumber
Yes
String
pollingInterval
No
String
keyClickability
No
String
statusIfConditionNotSatisfied
No
String
WaitForCellNonClickability
...
text | Enter the text of multiple cells separated by delimiter. | Yes | Array |
columnNumber | Enter the index of the column respective to cell data (separated by delimiter). | Yes | Number |
key | This will return the row number. | Yes | String |
Example:
StoreRowNumberOfMultipleCellText "Test1^India^998660^Active" “1^2^3^4” “key_4”
VerifyCellText
This action verifies if the provided cell text value along with row number and column number is present in DataTable.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|
timeOut
data | Enter the text of the cell. | Yes | String |
rowNumber | Enter the index of the row. | Yes | String |
columnNumber | Enter the index of the column. | Yes | String |
pollingInterval
No
String
keyNonClickability
No
String
statusIfConditionNotSatisfied
No
String
WaitForCellExistence
This action waits for the cell to exist, i.e. it is in DOM, in datatableExample:
VerifyCellText “Test1”"5" “1”
VerifyRowData
This action verifies if the provided cell text values along with row number is present in DataTable.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|
timeOut
No
String
rowNumber
Yes
String
columnNumber
Yes
String
pollingInterval
No
String
keyExistence
No
String
statusIfConditionNotSatisfied
No
String
WaitForCellNonExistence
rowNumber | Enter a number which points to the row as per listOfValues. | Yes | Number |
listOfValues | Enter the values with a separator/delimiter as caret. | Yes | Array |
Example:
VerifyRowData “2”"Test1^India^998660^Active"
WaitForCellChildElement
This action waits for the cell to not exist, i.e. it is not in DOM, in datatable.Input Parameterscontain child element until timeout expires. If object is not found in the DOM, step status will fail. If key is provided, status will be stored in key. The status depends on the statusIfConditionNotSatisfied parameter.
Input Parameters:
rowNumber
Parameter Name | Parameter Description | Mandatory | Data Type |
---|
timeOut
No
String
childLocatorType | Enter the locator type of cell’s child element. | Yes | String |
childLocatorValue | Enter the locator value of cell’s child element. | Yes | String |
pollingInterval
rowNumber | Enter the index of the row. | Yes | String |
keyNonExistence
columnNumber | Enter the index of the column. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the object visibility. | No | String |
WaitForCellInnerTextContains
This action waits for inner text of the cell to contain the expected text until timeout expires. If cell/datatable is not found in the DOM, step status will fail. If key is provided, status will be stored in key. The status depends on the statusIfConditionNotSatisfied parameter.
Input Parameters:
...
Parameter Name
...
Parameter Description
...
Mandatory
...
Data Type
...
innerText
...
Yes
...
String
...
rowNumber
...
Yes
...
String
...
columnNumber
...
Yes
...
String
...
timeOut
...
No
...
String
...
pollingInterval
...
No
...
String
...
keyInnerText
...
No
...
String
...
statusIfConditionNotSatisfied
...
No
...
String
WaitForCellInnerTextNotContains
This action waits for inner text of the cell to not contain the expected text until timeout expires. If cell is found in the DOM, step status will fail. If key is provided, status will be stored in key. The status depends on the statusIfConditionNotSatisfied parameter.
Input Parameters:
...
Parameter Name
...
Parameter Description
...
Mandatory
...
Data Type
...
innerText
...
Yes
...
String
...
rowNumber
...
Yes
...
String
...
columnNumber
...
Yes
...
String
...
timeOut
...
No
...
String
...
pollingInterval
...
No
...
String
...
keyInnerText
...
No
...
String
...
statusIfConditionNotSatisfied
...
No
...
String
WaitForCellInnerTextMatchesPattern
This action waits for inner text of the cell to match the specified pattern until timeout expires. If object is not found in the DOM, step status will fail. If key is provided, status will be stored in key. The status depends on the statusIfConditionNotSatisfied parameter.
Input Parameters:
...
Parameter Name
...
Parameter Description
...
Mandatory
...
Data Type
...
innerTextRegXPattern
...
Yes
...
String
...
rowNumber
...
Yes
...
String
...
columnNumber
...
Yes
...
String
...
timeOut
...
No
...
String
...
pollingInterval
...
No
...
String
...
keyInnerText
...
No
...
String
...
statusIfConditionNotSatisfied
...
No
...
String
WaitForCellInnerTextToBe
...
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String |
key | Enter the key name under which the status of the step needs to be stored. It stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to display in the report if the expected condition is not satisfied. The value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForCellChildElement “Xpath” “//*[@id=”brandBand_1]” “5” “2” “1”
WaitForCellClickability
This action waits until the cell of datatable becomes clickable.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|---|---|---|
timeOut | Enter the timeout (in seconds) to wait for the object visibility. | No | String |
rowNumber | Enter the index of the row. | Yes | String |
columnNumber | Enter the index of the column. | Yes | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String |
keyClickability | Enter the key name under which the status of the step needs to be stored. It stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to display in the report if the expected condition is not satisfied. The value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForCellClickability “10”“2” “2” “5”"keyClickability" “Fail”
WaitForCellNonClickability
This action waits until the cell of datatable becomes non-clickable.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|---|---|---|
timeOut | Enter the timeout (in seconds) to wait for the object visibility. | No | String |
rowNumber | Enter the index of the row. | Yes | String |
columnNumber | Enter the index of the column. | Yes | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String |
keyNonClickability | Enter the key name under which the status of the step needs to be stored. It stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to display in the report if the expected condition is not satisfied. The value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForCellNonClickability “10”“2” “5” “5”"keyNonClickability" “Fail”
WaitForCellExistence
This action waits for the cell to exist, i.e. it is in DOM, in datatable.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|
innerText
timeOut | Enter the timeout (in seconds) to wait for the object visibility. | No | String |
rowNumber | Enter the index of the row. | Yes | String |
columnNumber |
Yes
String
timeOut
No
String
pollingInterval
No
String
Enter the index of the column. | Yes | String | |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String |
statusIfConditionNotSatisfied
No
String
WaitForCellInnerTextNotToBe
This action waits for inner text of the cell to not be the expected inner text until timeout expires. If object is not found in the DOM, step status will fail. If key is provided, status will be stored in key. The status depends on the statusIfConditionNotSatisfied parameter.
Input Parameters:
...
Parameter Name
...
Parameter Description
...
Mandatory
...
Data Type
...
innerText
...
Yes
...
String
...
rowNumber
...
Yes
...
String
...
columnNumber
...
Yes
...
String
...
timeOut
...
No
...
String
...
pollingInterval
...
No
...
String
...
keyInnerTextNotToBe
...
No
...
String
...
statusIfConditionNotSatisfied
...
No
...
String
WaitForCellInvisibilty
key | Enter the key name under which the status of the step needs to be stored. It stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to display in the report if the expected condition is not satisfied. The value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForCellExistence “10”“5” “5” “5” “keyNonClickability” “Fail”
WaitForCellNonExistence
This action waits for the cell to be invisible not exist, i.e. it is not in DOM, in datatable.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|---|---|---|
timeOut |
Enter the timeout (in seconds) to wait for the object visibility. | No | String | |
rowNumber | Enter the index of the row. | Yes | String |
columnNumber | Enter the index of the column. | Yes | String |
pollingInterval |
No
String
keyInvisibility
Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String |
statusIfConditionNotSatisfied
key | Enter the key name under which the status of the step needs to be stored. It stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
WaitForCellSelection
This action waits for selection of the cell until timeout expires. If object is not found in the DOM, step status will fail. If key is provided, status will be stored in key. The status depends on the statusIfConditionNotSatisfied parameter.
Input Parameters:
...
Parameter Name
...
Parameter Description
...
Mandatory
...
Data Type
...
timeOut
...
No
...
String
...
rowNumber
...
Yes
...
String
...
columnNumber
...
Yes
...
String
...
pollingInterval
...
No
...
String
...
keySelection
...
No
...
String
...
statusIfConditionNotSatisfied
...
No
...
String
WaitForCellSelectStateToBe
...
statusIfConditionNotSatisfied | Enter the status of the step you want to display in the report if the expected condition is not satisfied. The value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForCellNonExistence “10”“5” “2” “5” “key” “Fail”
WaitForCellInnerTextContains
This action waits for inner text of the cell to contain the expected text until timeout expires. If cell/datatable is not found in the DOM, step status will fail. If key is provided, status will be stored in key. The status depends on the statusIfConditionNotSatisfied parameter.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|
expectedSelectionState
No
innerText | Enter the text of the cell. | Yes | String |
rowNumber | Enter the index of the row. | Yes | String |
columnNumber | Enter the index of the column. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the object visibility. | No | String |
pollingInterval |
No
String
keySelectionState
No
String
statusIfConditionNotSatisfied
No
Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String | |
keyInnerText | Enter the key in which the innerText needs to be stored. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to display in the report if the expected condition is not satisfied. The value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForCellInnerTextContains “Test1”“2” “5” “10”“5” “key” “Fail”
WaitForCellInnerTextNotContains
This action waits for inner text of the cell to not contain the expected text until timeout expires. If cell is found in the DOM, step status will fail. If key is provided, status will be stored in key. The status depends on the statusIfConditionNotSatisfied parameter.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|---|---|---|
innerText | Enter the text of the cell. | Yes | String |
rowNumber | Enter the index of the row. | Yes | String |
columnNumber | Enter the index of the column. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the object visibility. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String |
keyInnerText | Enter the key in which the innerText needs to be stored. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to display in the report if the expected condition is not satisfied. The value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForCellInnerTextNotContains “Test”“2” “5” “10”“5” “keyInnerText” “Fail”
WaitForCellInnerTextMatchesPattern
This action waits for inner text of the cell to match the specified pattern until timeout expires. If object is not found in the DOM, step status will fail. If key is provided, status will be stored in key. The status depends on the statusIfConditionNotSatisfied parameter.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|---|---|---|
innerTextRegXPattern | Enter the text of the cell. | Yes | String |
rowNumber | Enter the index of the row. | Yes | String |
columnNumber | Enter the index of the column. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the object visibility. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String |
keyInnerText | Enter the key in which the innerText needs to be stored. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to display in the report if the expected condition is not satisfied. The value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForCellInnerTextMatchesPattern “^t.*es$t”“2” “5” “10”“5” “keyInnerText” “Fail”
WaitForCellInnerTextToBe
This action waits for inner text of the cell to be the expected inner text until timeout expires. If object is not found in the DOM, step status will fail. If key is provided, status will be stored in key. The status depends on the statusIfConditionNotSatisfied parameter.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|---|---|---|
innerText | Enter the text of the cell. | Yes | String |
rowNumber | Enter the index of the row. | Yes | String |
columnNumber | Enter the index of the column. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the object visibility. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String |
keyInnerText | Enter the key in which the innerText needs to be stored. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to display in the report if the expected condition is not satisfied. The value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForCellInnerTextToBe “TestUpdate1”“2” “5” “10”“5” “keyInnerText” “Fail”
WaitForCellInnerTextNotToBe
This action waits for inner text of the cell to not be the expected inner text until timeout expires. If object is not found in the DOM, step status will fail. If key is provided, status will be stored in key. The status depends on the statusIfConditionNotSatisfied parameter.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|---|---|---|
innerText | Enter the text of the cell. | Yes | String |
rowNumber | Enter the index of the row. | Yes | String |
columnNumber | Enter the index of the column. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the object visibility. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String |
keyInnerTextNotToBe | Enter the key in which the innerText needs to be stored. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to display in the report if the expected condition is not satisfied. The value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForCellInnerTextNotToBe “TestUpdate1”“2” “5” “10”“5” “keyInnerText” “Fail”
WaitForCellVisibilty
This action waits for the cell to be visible in datatable.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|---|---|---|
timeOut | Enter the timeout (in seconds) to wait for the object visibility. | No | String |
rowNumber | Enter the index of the row. | Yes | String |
columnNumber | Enter the index of the column. | Yes | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String |
keyvisibility | Enter the key name under which the status of the step needs to be stored. It stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to display in the report if the expected condition is not satisfied. The value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForCellVisibilty “10”“2” “3” “5” “keyVisibility” “Fail”
WaitForCellInvisibilty
This action waits for the cell to be invisible in datatable.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|---|---|---|
timeOut | Enter the timeout (in seconds) to wait for the object visibility. | No | String |
rowNumber | Enter the index of the row. | Yes | String |
columnNumber | Enter the index of the column. | Yes | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String |
keyInvisibility | Enter the key name under which the status of the step needs to be stored. It stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to display in the report if the expected condition is not satisfied. The value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForCellInvisibilty “10”“2” “5” “5” “keyInvisibility” “Fail”
WaitForCellSelection
This action waits for selection of the cell until timeout expires. If object is not found in the DOM, step status will fail. If key is provided, status will be stored in key. The status depends on the statusIfConditionNotSatisfied parameter.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|---|---|---|
timeOut | Enter the timeout (in seconds) to wait for the object visibility. | No | String |
rowNumber | Enter the index of the row. | Yes | String |
columnNumber | Enter the index of the column. | Yes | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String |
key | Enter the key name under which the status of the step needs to be stored. It stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to display in the report if the expected condition is not satisfied. The value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForCellSelection “10”“5” “2” “5” “key” “Fail”
WaitForCellSelectStateToBe
This action waits for selection state of the cell to be expected state until timeout expires. If object is not found in the DOM, step status will fail. If key is provided, status will be stored in key. The status depends on the statusIfConditionNotSatisfied parameter.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
---|---|---|---|
expectedSelectionState | Enter true for selected and false for deselected. The default value is true. | No | String |
rowNumber | Enter the index of the row. | Yes | String |
columnNumber | Enter the index of the column. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the object visibility. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String |
keySelectionState | Enter the key name under which the status of the step needs to be stored. It stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to display in the report if the expected condition is not satisfied. The value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForCellSelectStateToBe “True”“10”“5” “3” “5” “key” “Fail”
WaitForCellStaleness
This action waits for staleness of the cell until timeout expires. If object is not found in the DOM, step status will fail. If key is provided, status will be stored in key. The status depends on the statusIfConditionNotSatisfied parameter.
...
Parameter Name | Parameter Description | Mandatory | Data Type | |||
---|---|---|---|---|---|---|
timeOut | Enter the timeout (in seconds) to wait for the object visibility. | No | String | |||
rowNumber | Enter the index of the row. | Yes | String | |||
columnNumber | Enter the index of the column. | Yes | String | rowNumber | Yes | |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String | columnNumber | Yes | String |
pollingIntervalkey | Enter the key name under which the status of the step needs to be stored. It stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | StringkeyStatus | |||
statusIfConditionNotSatisfied | Enter the status of the step you want to display in the report if the expected condition is not satisfied. The value for this parameter can be Pass, Fail, and Defect. | No | String | statusIfConditionNotSatisfied | No | String
Example:
WaitForCellStaleness “10”“5” “2” “5” “key” “Fail”
VerifyPropertyValue
This action verifies the property of the specified object using property names, such as class, id, name, and role, and parameter value, such as the actual value of the property.
...