Versions Compared

Old Version 8

changes.mady.by.user Sagar Dubewar (Unlicensed)

Saved on

compared with

New Version Current

changes.mady.by.user ravi.chandran (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

OpenURL

This action opens the specified URL in the browser selected browserunder Configuration Settings.

Input Parameters:

ParameterNameParameter Name

Parameter Description

Mandatory

Data Type

url

Enter the URL that you want to open.

Yes

String


Example:

OpenUrl                               "http://www.google.com/"

NavigateForward

This action navigates the browser to the next page.

This action does not have any parametersparameter.

Example:

NavigateForward

NavigateBack

This action navigates the browser to the previous page.

This action does not have any parametersparameter.

Example:

NavigateBack

StorePageURL

This action stores the URL of the web page URL under the specified key name. The stored value can be retrieved using the key name. 

Input Parameters:


Parameter Name

Parameter Description

Mandatory

Data Type

key

Enter the key name to store URL.

Yes

String


Example:

StorePageURL                   "Key"

StorePageTitle

This action stores the web page title under the specified key name. The stored value can be retrieved using the key name. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

key

Enter the key name to store page title.

Yes

String

Example:

StorePageTitle                   "Key"

StoreVariable

This action stores a particular string value in a variable (key). The key value can be retrieved using the key name. under the specified key. This value then can be used when developing test cases.  

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

key

Enter the key name to store variable.

Yes

String

data

Enter the data value to be stored under the key name.

Yes

String

Example:

StoreVariable                   "url"                     "http://www.bing.com/"  

SecureStoreVariable

This action stores the specified value securely by encrypting it under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

key

The variable in under which the string data is to be stored.

Yes

String

data

Enter the data to be stored in encrypted mode.

Yes

String


Example:

SecureStoreVariable              "Password"                               "Encrypt(Abc)"

When the focus is moved away from the data ABC, Qualitia will automatically encrypt the text to "vHpmlfI4R3PQJskt3nuqw==þNWE3ZDdkNjE3N2JmNDM2ODgxMzQwYWI1MTA3YWNjMDc="

On this page:

Table of Contents
maxLevel2
minLevel2
absoluteUrltrue


Multiexcerpt macro
nameSleep

Sleep

This action

introduces a

adds the delay during execution for the given period of time (in seconds).

This action can be used when a particular action takes some time for execution. For instance, after performing an OpenUrl action, some amount of wait can be given till the URL is opened completely.

The default value is 20, when not specified.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

seconds

The number of seconds to wait for

No

String

Example:
Sleep                   "20"

SelectPage

This action selects a popup browser window using a window name as the locator. Once the popup window is selected, all commands are sent to the selected page/window.helps Qualitia users moving focus from one window/page to another as per the test case requirements. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

windowName

This is

Enter the name of the window

on

which

the actions need to be performed. 
To

you want to select. You may use "NULL" to select the main

browser

window

again, use "null" as the windowName

.

Yes

String

Example:

Select Page                            "Name"

ClosePopUpBrowser

This action closes the popup appeared on from the browserweb page. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

windowName

This is Enter the name of the window which needs to be closed 
The data type of this parameter is Stringthat you want to close.

Yes

String

Example:
ClosePopUpBrowser                     "viewPage"


Multiexcerpt macro
namePressKeys

PressKeys

This action sends one or more keystrokes to the active window (as if typed on the keyboard).

Info

This action is applicable only for desktop web applications.

This action does not work when executing test cases in remote environment. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

strKey

The

Enter the key

to be pressed for the browser window

which you want to press from the key board. 

Yes

String

Example:

Suppose the user want to open the Find dialog on the Browser window under test. Manually this is done by pressing the keys Control and F simultaneously. This opens the Find dialog on the browser window. The same thing can be done using the action PressKeys .The data to be passed to the action in this case will be given as ~^F where ^ means Control. (See the list below for the keys and their meaning.

The action will return 0, if the key is pressed successfully else it will return 1 in any other case. 

Important Note:

Ideally the data to be passed here is only ^F, however as ^ has a special meaning in Qualitia it has to be preceded with an escape sequence ~. Hence the data passed will be ~^F.


Make sure to prefix an escape sequence which is a tilda for the following characters which has a special meaning in Qualitia. The characters are {,}, ^, ~


Ex:

  1. If key to be sent is {F1} then user should pass data as ~{F1~}
  2.  To send {TAB} then user should pass data as ~{TAB~}
  3.  To send {ENTER}
then 
  1. user should pass data as ~{ENTER~}

Use the PressKeys method to send keystrokes to applications that have no automation interface. Most keyboard characters are represented by a single keystroke. Some keyboard characters are made up of combinations of keystrokes (CTRL+SHIFT+HOME, for example). To send a single keyboard character, send the character itself as the string argument. For example, to send the letter x, send the string argument "x".
You can use PressKeys to send more than one keystroke at a time. To do this, create a compound string argument that represents a sequence of keystrokes by appending each keystroke in the sequence to the one before it. For example, to send the keystrokes a, b, and c, you would send the string argument "abc". The PressKeys method uses some characters as modifiers of characters (instead of using their face-values). This set of special characters consists of parentheses, brackets, braces, and the:

  • plus sign       "+",
  • caret             "^", (Use with escape character (~))
  • percent sign "%",
  • and tilde       "~"

Send these characters by enclosing them within braces "{}". For example, to send the plus sign, send the string argument "{+}". Brackets "[ ]" have no special meaning when used with PressKeys, but you must enclose them within braces to accommodate applications that do give them a special meaning (for dynamic data exchange (DDE) for example).

  • To send bracket characters, send the string argument "{[}" for the left bracket and "{]}" for the right one.
  • To send brace characters, send the string argument "}" for the left brace and "{" for the right one.

Some keystrokes do not generate characters (such as ENTER and TAB). Some keystrokes represent actions (such as BACKSPACE and BREAK). To send these kinds of keystrokes, send the arguments shown in the following table:

Key

Argument

BACKSPACE

~{BACKSPACE~}, ~{BS~}, or ~{BKSP~}

BREAK

~{BREAK~}

CAPS LOCK

 ~{CAPSLOCK~}

DEL or DELETE

~{DELETE} or ~{DEL~}

DOWN ARROW

~{DOWN~}

END

~{END~}

ENTER

~{ENTER~} or ~

ESC

~{ESC~}

HELP

~{HELP~}

HOME

~{HOME~}

INS or INSERT

~{INSERT~} or ~{INS~}

LEFT ARROW

~{LEFT~}

NUM LOCK

~{NUMLOCK~}

PAGE DOWN

~{PGDN~}

PAGE UP

~{PGUP~}

PRINT SCREEN

~{PRTSC~}

RIGHT ARROW

~{RIGHT~}

SCROLL LOCK

~{SCROLLLOCK~}

TAB

~{TAB~}

UP ARROW

~{UP~}

F1

~{F1~}

F2

~{F2~}

F3

~{F3~}

F4

~{F4~}

F5

~{F5~}

F6

~{F6~}

F7

~{F7~}

F8

~{F8~}

F9

~{F9~}

F10

~{F10~}

F11

~{F11~}

F12

~{F12~}

F13

~{F13~}

F14

~{F14~}

F15

~{F15~}

F16

~{F16~}

To send keyboard characters that are comprised of a regular keystroke in combination with a SHIFT, CTRL, or ALT, create a compound string argument that represents the keystroke combination. You do this by preceding the regular keystroke with one or more of the following special characters:
Key  Special Character
SHIFT  +
CTRL

 ^

 ^ (Use with escape character (~))
ALT  %
Note: When used this way, these special characters are not enclosed within a set of braces.
To specify that a combination of SHIFT, CTRL, and ALT should be held down while several other keys are pressed, create a compound string argument with the modified keystrokes enclosed in parentheses. For example, to send the keystroke combination that specifies that the SHIFT key is held down while:

  • e and c are pressed, send the string argument "+(ec)".
  • e is pressed, followed by a lone c (with no SHIFT), send the string argument "+ec".
  • If you want to send a key combination that includes Ctrl key, send it like this: to send Ctrl + N send "~^n".

You can use the PressKeys method to send a pattern of keystrokes that consists of a single keystroke pressed several times in a row. To do this, create a compound string argument that specifies the keystroke you want to repeat, followed by the number of times you want it repeated. You do this using a compound string argument of the form {keystroke number}. For example, to send the letter "x" ten times, you would send the string argument "{x 10}". Be sure to include a space between keystroke and number.

Note
  • The only keystroke pattern you can send is the kind that is comprised of a single keystroke pressed several times. For example, you can send "x" ten times, but you cannot do the same for "Ctrl+x".
  • You cannot send the PRINT SCREEN key ~{PRTSC~} to an application.
  • To send a space, send the string " ".



Multiexcerpt macro
nameStoreSubString

StoreSubString

This action stores a substring of a string into a variable. The key value can be retrieved using the key name. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

strKey

The variable in which the

substring

sub-string is to be stored.

Yes

String

strMainString

The

Enter the string whose

substring

sub-string value is to be stored.

Yes

String

intStart

The

Enter the index of the string from where the

substring

sub-string is to be fetched.

Yes

String

intLength

The number of characters required in the string.

Yes

String


Example:
StoreSubString                   "resultSubString"        "This is a test"                "2"           "4"


Multiexcerpt macro
nameStoreStringLength

StoreStringLength

This action increments the string length by the value specified by the user and stores it into a variable.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

strKey

The variable in which the length of the string is to be stored

Yes

String

strMainString

The string whose length is to be stored

Yes

String

intIncrement

The value by which the length needs to be incremented

Yes

String

Example:
StoreStringLength                             "length"                      "This is a test"            "3"


Multiexcerpt macro
nameCompareString

CompareString

This action compares two strings. The comparison can be either case-sensitive / non case-sensitive. Even a key can be passed as one of the parameters for comparison where the CompareString function will retrieve the value from the key and that value will be compared with expected.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

firstString

String 1 to be compared 
Even a key name can be passed here enclosed in braces 
Data type of this parameter is alphanumeric

Enter the 1st string value that you want to compare. You can pass the key name here enclosed in braces.

Yes

String

mainString

String 2 to be compared. Even a key name can be passed

Enter the 2nd string value that you want to compare. You can pass the key name here enclosed in braces.

 

Data type of this parameter is alphanumeric.

Yes

String

caseSensitive

The

Specify the kind of comparison

to be done 
If True  - Case sensitive comparison 
If False – Case insensitive comparison

; case-sensitive or case-insensitive.

  • Set True for case-sensitive comparison.
  • Set False for case-insensitive comparison.

Yes

String

Example:
StoreVariable             "Cancel"           "key"

CompareString           "{key}"           "Cancel"          "true"

Here the CompareString action shall retrieve the value for the key (here Cancel) and compare it with the expected (here Cancel) with case sensitive comparison as True. The action will return 0, if the strings match else it will return 2 if the strings do not match. It will return 1 in any other case (like an error).

The action can also compare strings having a new line character.
The spaces of both the strings are trimmed before comparing.


Multiexcerpt macro
nameVerifyStringContainsValue

VerifyStringContainsValue

This action verifies that the substring is present within the main string. Comparison can either be case sensitive or insensitive.

This action verifies that the substring is present within the main string. Comparison can either be case sensitive or insensitive.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

MainString

The

Enter the main

String

string in which

the substring will be searched for.
Even a key name can be passed

you want to search substring. You can pass the key name here enclosed in braces.

 

Data type of this parameter is alphanumeric.

Yes

String

Substring

The string to be searched for in the main string. 
Even a key name can be passed

Enter the 2nd string value that you want to search. You can pass the key name here enclosed in braces

.Data type of this parameter is alphanumeric

.

Yes

String

caseSensitive

This can be set as True or False. 
If True  - Case sensitive comparison 
If False – Case insensitive comparison

Specify the kind of comparison; case-sensitive or case-insensitive.

  • Set True for case-sensitive comparison.
  • Set False for case-insensitive comparison.

Yes

String

Example:
StoreVariable                           "Testing the action"                   "mainStrKey"

VerifyStringContainsValue      "{mainStrKey}"                               "the action"              "

true

True"

Here the VerifyStringContainsValue action shall retrieve the value for the key mainStrKey and compare it with the expected with case sensitive comparison as True.

The action will return 0, if the

substring

sub-string is found in the main string, else it will return 2 if the

substring

sub-string is not found in the main string. In any other case it will return 1.

Empty and null

substrings

sub-strings will not be verified by this action.


Multiexcerpt macro
nameComparePattern

ComparePattern

Verifies that

This action compares the data passed by

the

user and verifies that it matches the pattern specified by the user.

Match can either be case sensitive or insensitive. 

  

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Pattern

The

Enter the pattern against which the data specified by the user will be verified.

Yes

String

Data

The

Enter the data which will be matched against the pattern specified by the user.

Yes

String

caseSensitive

The data type can be set as true or false. 
If True  - Case sensitive comparison 
If False – Case insensitive comparison

Specify the kind of comparison; case-sensitive or case-insensitive.

  • Set True for case-sensitive comparison.
  • Set False for case-insensitive comparison.

Yes

String

Example:
Consider a bank application where on adding a user an account number is generated which is unique and consists of alphanumeric characters. The number of characters in that account number is 10 where the first 5 are alphabets and remaining five are numbers.

Suppose the account number is YuIFp96062. If this has to be verified for the pattern mentioned, we can use the action ComparePattern as follows:

  • strPattern -  /^[a-z]/{5/}[0-9]/{5/}$
  • strData –  YuIFp96062
  • blnCase -    False

ComparePattern                 "/^[a-z]/{5/}[0-9]/{5/}$"                   "YuIFp96062"                  "false"

Here the ComparePattern action shall verify that data mentioned matched the specified pattern .The action will return 0, if the data matches the specified pattern , else it will return 2 if the data does not match the pattern. In any other case it will return 1.

If the pattern is using Qualitia's special characters like {,},/,^ then they should be prefixed with /.

Special characters and sequences are used in writing patterns for regular expressions. For a complete list of the regular expression syntax visit the VBScript syntax Guide for Regular Expressions.


Multiexcerpt macro
nameVerifyDifference

VerifyDifference

This action verifies the difference between two integer values and

stores it in a variable

validates it with the expected difference value.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Int1

Enter the

interger 1 to verify difference

1st numerical value to compare. You can pass the key name here enclosed in braces.

Yes

Integer

String

Int2

Enter the

interger 1 to verify difference

2nd numerical value to compare. You can pass the key name here enclosed in braces.

Yes

Integer

String

difference

The

Enter the expected difference between the two

integers

numbers.

Yes

String

Example:
VerifyDifference                       "30"                 "40"               "10"

Multiexcerpt include macro
nameStoreSplitString
pageQASWM7:General Web Actions

MaximizeBrowser

This action splits the string based on the delimiter specified by the user, and stores a particular instance from the splits into a variablemaximizes the browser.

This action does not have any parameter. 

Example:

MaximizeBrowser

Example:
StoreSplitString                "SplitKey"                    "This,is, a, test"              ","                     "3"

MaximizeBrowser

This action maximizes the  browser.

Example:

MaximizeBrowser

SelectFrame

This action selects a frame within the current window.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

locator

This locator can have the values of the frame's: Id, Name, Xpath, css
Multiexcerpt macro
nameSelectFrame

SelectFrame

This action selects a frame within the current window.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

strKey

The variable in which the instance of the split string is to be stored

Yes

String

mainString

The string which is to be split

Yes

String

Delimiter

The delimiter to be used for splitting

Yes

String

instance

The instance of the split string that is required.

Ex: if the string is split into 4 strings, then which among the 4 strings is required is the instance parameter

Yes

String

locator

Enter the locator using which you want to select the frame. This parameter can have the values of the frame's: ID, Name, Xpath, CSS.

Yes

String

locatorType

This is the type of locator used

Enter which locator type you want to use. It can be

Id

ID,

name

Name, xpath, CSS and so on.

 
In

 In order to come out of all the frames, the parameters passed should be empty.

Yes

String

Example:

SelectFrame                        "mainFrame"               "name"


Multiexcerpt macro
nameStoreCurrentDateInFormat

StoreCurrentDateInFormat

This action stores the current date in the specified format

in a variable.

under the key name. The key value can be retrieved using the key name. 

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Format

This parameter specifies

Enter the format

in which the current date is to be stored. The valid formats are of the form dd

which you want to use to save the date. Use DD for day, MM for month and

yyyy

YYYY for year

. The combination of the same shall be the date format

. 

E.g.

For example: dd/MM/yyyy , MMM/dd/yyyy , dd-MM-yyyy

etc 

.  
dd = day 
MM = month represented as 01,02,03 etc 
MMM = month represented as Jan. Feb, Mar etc 
yyyy = year

Yes

String

key

The variable in which

Enter the key name under which you want to store the current date

will be stored

.

Yes

String

Example:
StoreCurrentDateInFormat                             "MM-dd-yyyy"                "currentDateKey"


StoreDateInFormat

This action stores the date provided by the user in a specific format in a keyunder the key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

date

The date which needs to be stored in the specified format.

Yes

String

Format

This parameter specifies Enter the format of using which you want to save the date provided by the user. 
The valid formats are of the form dd . Use DD for day, MM for month and yyyy for year. The combination of the same shall be the date format. 
E.g.YYYY for year.

For example: dd/MM/yyyy , MMM/dd/yyyy , dd-MM-yyyy, and so on.
dd = day 
MM = month represented as 01,02,03 etc 
MMM = month represented as Jan. Feb, Mar etc 
yyyy = year

Yes

String

resultFormat

Format in which the date given by the user needs to be stored.

Yes

String

key

The variable in Enter the key name under which the date in the new result format will be stored.

Yes

String

Example:
StoreDateInFormat                      "30/Jan/2009"                    "dd/MMM/yyyy"               "dd-MMM-yyyy"             "Datekey"

VerifyDates

This action performs comparisons between two dates for various operations (equality, inequality, greater than, less than).

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

startDate

The Enter the start date which needs to be verified.

Yes

String

startformat

The Enter the format of the start given date given by the user.

Yes

String

endDate

The Enter the end date which needs to be verified compared with the start date.

Yes

String

endFormat

This is Enter the format of the end given date.

Yes

String

operation

Operation Specify the operation to be performed between the first and second dates ("<,>,==,!=").

Yes

String

Example:

To verify if the first

.

  • Use < to verify that the first date is less than (comes before) the second date
use the operation "<"To verify if
  • .
  • Use > to verify that the first date is greater than (comes after) the second date
use the operation ">"
  • To verify if the dates are equal use the operation "=="
    • To verify if
    • .
    • Use == to verify that the dates are
    not equal use the operation "!="
    • equal.
    • Use != to verify that the dates are unequal.

    Yes

    String

    Example:

    The result of this action shall be true or false depending on the operation performed.

    VerifyDates                            "12-Jun-2008"                     "dd-MMM-yyyy"                          "04/12/2008"                      "dd/MM/yyyy"               "<"

    Multiexcerpt include macro
    nameDateTimeFormatSupported
    pageQASFWM:General Web Actions

    ChangeDateAndStore

    This action modifies the day/month/year by the number specified by the user . The and stores the resulting date shall be stored in a under the specified key in the same format as the input date. The key value can be retrieved using the key name.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    dateThe

    Enter the date which that needs to be changedupdated.

    Yes

    String

    format

    The Enter the format of the date given by the user.

    Yes

    String

    dayValue

    Value Enter the value by which the day needs to increased/decreased. E.g.: you want to increase/decrease the day. For example; "1", "-3".

    Yes

    String

    monthValue

    Value Enter the value by which you want to increase/decrease the month needs to increased/decreased. E.g.: "0. For example; "1", "-3".

    Yes

    String

    yearValue

    Value Enter the value by which you want to increase/decrease the year needs to increased/decreased. E.g.: . For example; "1", "-3".

    Yes

    String

    key

    Variable in Enter the key name under which the modified updated date is will be stored. 

    Yes

    String

    Example:
    To change date from 1st jan 2007 to 15 feb 2007 user can use 2 ways

    1. Increment only the day value
      dayValue = 45, monthValue = 0 , yearValue = 0
      E.g.- ChangeDateAndStore                      "01-01-2007"                 "dd-MM-yyyy"              "45"             "0"               "0"         "key"
    2. Increment the complete date
      dayValue = 14, monthValue = 1 , yearValue = 0
      E.g.- ChangeDateAndStore                      "01-01-2007"                 "dd-MM-yyyy"              "14"             "1"               "0"         "key"

    Hence the user can either give the exact end date or can give the no of days, months or years by which the date needs to be changed.

    CalculateDifferenceInDatesAndStore

    This action calculates the difference in days between the two specified dates and stores the difference in a under the specified key. The key value can be used using the key name.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    startDate

    The Enter the start date given by the userto compare.

    Yes

    String

    startformat

    The Enter the date format of the start date given by the user.

    Yes

    String

    endDate

    The Enter the end date given by the userto compare.

    Yes

    String

    endFormat

    The Enter the date format of the end date.

    Yes

    String

    key

    Variable in which the difference in days is stored.Enter the key name under which the difference (in days) will be stored. 

    Yes

    String

    Example:
    CalculateDifferenceInDatesAndStore                             "24-Jan-2007"                    "dd-MMM-yyyy"                     "01/26/2007"                      "MM/dd/yyyy            "diffKey"

    VerifyDialogExistence

    This action verifies if any dialog of the type alert/prompt/confirmation exists on the browser.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    existence

    Value of this parameter can be true or false.If True – checks if the alert is present 
    If False – checks if the alert is not present

    • Set True if you want to check for the presence.
    • Set False if you want to check for the absence.

    Yes

    String

    Example:
    VerifyDialogExistence                       "True"

    AnswerForNextDialog

    This action sets the input as the answer for the next prompt. After setting the answer, webdriver by default may cancel the prompt. So for the input to be accepted

    In order to accept and submit your input in the prompt, this action should be used followed by the action "AcceptDialog".

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    answer

    The input that to be Enter the input which you want to set in the next prompt.

    Yes

    String

    Example:

    AnswerForNextDialog           "hello"Hello"


    Multiexcerpt macro
    nameAcceptDialog

    AcceptDialog

    This action clicks the OK button on the alert/prompt/confirmation pop up.

    This action does not have any

    parameters

    parameter.

    Example:
    AcceptDialog


    Multiexcerpt macro
    nameDismissDialog

    DismissDialog

    This action cancels the alert/prompt/confirmation pop up.

    This action does not have any

    parameters

    parameter.

    Example:
    DismissDialog


    Multiexcerpt macro
    nameStoreDialogText

    StoreDialogText

    This action stores the message

    on

    from the alert/prompt/confirmation pop up

    in a key

    under the specified key. The key value can be retrieved using the key name.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    key

    The variable in which the pop up message is to be stored

    Enter the key name under which you want to save the message.

    Yes

    String

    Example:

    StoreDialogText               "message"


    Multiexcerpt macro
    nameExecuteFile

    ExecuteFile

    This action executes the batch file

    specifies

    specified by the user.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    batchFile

    The absolute path

    of

    to the batch file to be executed.

    Value with whitespace in this parameter is not accepted

    Path should not have whitespace.

    Yes

    String

    Example:
    ExecuteFile                     "C:\test\batchfile1.bat"


    Multiexcerpt macro
    nameAttachFile

    AttachFile

    This action sets a file path in the file object type in html.

    This

     This action is applicable only for desktop web application.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    fileInputlocator

    The

    Enter the locator of the input box where the file is to be selected.

    Yes

    String

    locatorType

    The

    Enter the type of locator used for the locator of the file input object. 
    This could be Id, xpath, name,

    css class

    CSS.

    Yes

     String

    filePath

    The

    Enter the absolute path of the file.

    It is assumed that the file exists.

     

    Yes

    String

    Example:
    AttachFile                    "fileBox"                "id"                 "c:/Folder/test.txt"

    ExecuteQueryAndStoreInFile

    This action executes data manipulation queries like select and stores the result into a file.

    The file types supported are xml, xmls and txt. The valid extensions are

    1. For text file - .txt
    2. For xml file- .xml
    3. For excel file- .xls

    The databases tested are my sql 5.1, Oracle 10g,MS Access, SQL Server 2008.

    Connection to different databases 
    1. Mysql: 
    a. Driver - "com.mysql.jdbc.Driver" 
    b. Connection url - jdbc:mysql://localhost:portNo/databasename?useUnicode=true&characterEncoding=utf8" 
    i. Databasename -is the mysql database to which the user wishes to connect 

    2. Oracle: 
    a. Driver - "oracle.jdbc.driver.OracleDriver" (case-sensitive)
    b. Connection url - "jdbc:oracle:thin:@servername or ip:portNo:Databasename" 
    i. Servername -is the name of the server .If the server is on local system, the server name is localhost. If the server is on remote system, the ip address of the remote server can be used. 
    ii. portNo – is the port which shall listen the database connections. The default port for oracle is 1521. If the user has configured a specific port for listening, then that port number should be used here. 
    iii. Databasename is the oracle database to which the user wishes to connect 

    3. SQLServer: 
    a. Driver - "com.microsoft.sqlserver.jdbc.SQLServerDriver" 
    b. Connection url - "jdbc:sqlserver://servername/ip:port;database=databasename;" 
    i. Servername -is the name of the server .If the server is on local system, the server name is localhost. If the server is on remote system, the ip address of the remote server can be used. 
    ii. portNo – is the port which shall listen the database connections. The default port for oracle is 1433. If the user has configured a specific port for listening, then that port number should be used here. 
    iii. Databasename is the sql server database to which the user wishes to connect 

    4. MSAccess using dsn: 
    a. Driver - "sun.jdbc.odbc.JdbcOdbcDriver" 
    b. Connection url - "jdbc:odbc:dsn_name 
    i. dsn_name -is the name of the dsn configured on the system . If multiple users are accessing the same dsn, then it needs to be configured on a shared path instead of local system path.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    Driver

    Enter the driver for the database.

    Yes

    String

    url

    Enter the connection string to connect to the database.

    Yes

    String

    username

    Enter the user name to connect to the database.

    Yes

    String

    Password

    Enter the password to connect to the database.

    Yes

    String

    Query

    Enter the ddl query that needs to be executed.

    Yes

    String

    File

    Enter the absolute path of the file in which the results of the database query need to be stored.

    Yes

    String

    Example
    ExecuteQueryAndStoreInFile "oracle.jdbc.driver.OracleDriver" "jdbc:oracle:thin:@localhost:1521:orcl" "scott" "tiger" "select * from test_table where id = 100" "C:\DBResults\XML\ORACLE\Result.xml"

    ExecutQueryAndStoreInKey

    This action executes data definitions queries like update, delete and stores the result into a key.

    Connection to different databases 
    1. Mysql: 
    a. Driver - "com.mysql.jdbc.Driver" 
    b. Connection url - jdbc jdbc:mysql://localhost:portNo/databasename?useUnicode=true&characterEncoding=utf8" 
    i. Databasename -is the mysql database to which the user wishes to connect 

    2. Oracle: 
    a. Driver - "oracle.jdbc.driver.OracleDriver" 
    b. Connection url - "jdbc:oracle:thin:@servername or ip:portNo:Databasename" 
    i. Servername -is the name of the server .If the server is on local system, the server name is localhost. If the server is on remote system, the ip address of the remote server can be used. 
    ii. portNo – is the port which shall listen the database connections. The default port for oracle is 1521. If the user has configured a specific port for listening, then that port number should be used here. 
    iii. Databasename is the oracle database to which the user wishes to connect 

    3. SQLServer: 
    a. Driver - "com.microsoft.sqlserver.jdbc.SQLServerDriver" 
    b. Connection url - "jdbc:sqlserver://servername/ip:port;database=databasename;" 
    i. Servername -is the name of the server .If the server is on local system, the server name is localhost. If the server is on remote system, the ip address of the remote server can be used. 
    ii. portNo – is the port which shall listen the database connections. The default port for oracle is 1433. If the user has configured a specific port for listening, then that port number should be used here. 
    iii. Databasename is the sql server database to which the user wishes to connect 

    4. MSAccess using dsn: 
    a. Driver - "sun.jdbc.odbc.JdbcOdbcDriver" 
    b. Connection url - "jdbc:odbc:dsn_name 
    i. dsn_name -is the name of the dsn configured on the system . If multiple users are accessing the same dsn, then it needs to be configured on a shared path instead of local system path.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    Driver

    Enter the driver for the database.

    Yes

    String

    url

    Enter the connection string to connect to the database.

    Yes

    String

    username

    Enter the user name to connect to the database.

    Yes

    String

    Password

    Enter the password to connect to the database.

    Yes

    String

    Query

    Enter the dml query that needs to be executed.

    Yes

    String

    key

    Enter the key in which the result of the database query need to be stored.

    Yes

    String

    Example:
    ExecuteQueryAndStoreInKey "oracle.jdbc.driver.OracleDriver" "jdbc:oracle:thin:@localhost:1521:orcl" "scott" "tiger" "delete from test_table where id = 100" "Resultkey"

    CompareTabularResults

    This action compares the database results in two files and displays only the difference in an MSExcel Microsoft or a kingsoft excel kingsoft Excel sheet. A link is generated in the log file. On clicking on the link, the excel sheet opens in which the difference in the data is displayed. This action compares the following file types which contain the DB results. These files contain the results after executing the queries using the actions "ExecuteQueryAndStoreInFile" or "StoreTableData". The supported file extension types are : txt, xml and xls.

    1. text and text
    2. text and excel
    3. text and xml
    4. xml and xml
    5. xml and excel
    6. excel and excel

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    firstFile

    The complete location of the first file to be compared

    Yes

    String

    secondFile

    The complete location of the second file to be compared

    Yes

    String

    resultFileType

    The file type in which the difference between the two results need to be displayed. The files types supported are file type supported is: 
    MSExcel This parameter is for future enhancements

    NO

    "MSExcel"

    No

    String

    Example
    CompareTabularResults             "C:\DBResults\XML\ORACLE\Result.xml"                 "C:\DBResults\Excel\ORACLE\Result.xls"                     "MSExcel"

    ComputeExpression

    This action evaluates mathematical, relational, logical operations and stores the result in a keyunder the specified key. The key value can be retrieved using the key name.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    expression

    The expression to be evaluated

    Yes

    String

    strKey

    The key on under which the result of the evaluation need to will be stored.

    Yes

    String

    Example:

    Mathematical Expression
    ComputeExpression                "24*2+4"              "resultResult"

    Example:

    Relational Expression
    ComputeExpression               "10*2<30"              result"Result"

    Example:

    Logical Expression
    ComputeExpression             "10*2+1>19&10*2+2<23'"       "resultResult"

    CompareArray

    This action compares two arrays for equality.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    firstArray

    The first array whose items are separate by carat (^) operator.

    NO

    No

    Array

    secondArray

    The second array whose items are separate by carat (^) operator.

    NO

    No

    Array

    match

    This parameter specifies the type of comparison to be done. It can be one of the

    following 

    following: 

    • Exact – This will compare the items of the array for exact
    match 
    i.e
    • match that is size of the two arrays should match
    , the
    • . The sequence in which the items occur in the arrays should match. This is a one to one
    comparison 
    • comparison. 
    • Partial- This compares if the second array is
    a Sublist
    • a sub-list of the first. The
    sublist
    • sub-list items in the second array need not be in the same sequence as they appear in the first array.
     
    However
    •  However, it is not vice versa
    i.e
    • , that is, it will not check if the first array is a
    sublist
    • sub-list of the seconds array.
    This
    • In this case, the action will fail.
    NO

    No

    Exact

    String

    Example :
    CompareArray "1^2^3^4" "1^2^3^4"             "exact"
    CompareArray "1^2^3^4^5^6" "2^1^3^4"      "partial"

    StoreWindowHandle

    This action fetches the handle (identifier) of a window and stores in a under the specified key.  This key can the be used in action like SelectPage and ClosePopupBrowser to work on the specific page. This action can be used when the name of the window on which user needs to work on is not known. This

    Also, this action will have to be used immediately after every action which results in opening a new window. Only then user will be able to work on the new opened window. Thus, immediately after every action which opens a new window, this action will have to be used in order to fetch the identifier of the new window.For every window in the application, this action will have to be used.
    For example: If the windows have the following order
    Login Window------New child window 2 ------- then after every action which opens a new window, this action will have to be used for all the 3 windows.in order to fetch the identifier of the new window.

    This action has to be used for every window of the application. For more information about this, please refer to the knowledge base here. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    strKey

    The key on which the handle of the window need to be stored

    Yes

    String

    Example : 
    Object1                                   Click 
    StoreWindowHandles            "new window" 
    SelectPage                              "{new window}" 
    EditObjectOnNewPage           Set                 Testing 
    In the example above example, on clicking on object1 a new window is opened on which actions need to be performed.

    Use the action StoreWindowHandles to fetch the handle of the new window opened. Use the SelectPage action to select the window. Then user can work on an object present on the new page.

    Also, when the action OpenUrl is used, user will have to store the handle on this main application window.

    Example:

    OpenUrl                                 "http://www.google.com"
    StoreWindowHandle            "mainapplicationWindow"

    ExitTask

    If this action in used, This action skips the execution of the next step is skipped and execution continues with and continue executing the next task. 

    This action is not available for test case level step.

    This action does nothave not have any parametersparameter.

    Example:

    ExitTask

    ExitTCIteration

    If this action is used, execution will skip This action skips the execution of the current iteration of test case and execute next iteration. In case of a single TC Iteration the test case execution will stop.

    This action does not have any parametersparameter.

    Example:

    ExitTCIteration

    ExitSuite

    If this action is used, execution will stop This action stops the execution of the test suite and no further test cases will be executed.

    This action does not have any parametersparameter.

    Example:

    ExitSuite

    VerifyLinkOnPage

    This action verifies if the link is present there is any hyperlink exists on the page.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    Link

    The locator of the link to be verified. This is the inner text of the link.

    Yes

    String

    Example:
    VerifyLinkOnPage                    "AdvancedSearch"


    Multiexcerpt macro
    nameDragandDroptoObject

    DragAndDropToObject

    This action drags the specified object and drops it in the position of another specified object. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    dragLocator

    Locator

    Enter the locator value of an element to be dragged.

    Yes

    String

    dragLocatorType

    Locator

    Enter the locator type of the element to be dragged.

    Yes

    String

    dropToLocator

    Locator

    Enter the locator of an element whose location (i.e., whose

    center

    centre-most pixel) will be the point where dragLocator is dropped.

    Yes

    String

    dropToLocatorType

    Locator

    Enter the locator type of the element where the element will be dragged.

    Yes

    String

    Example:
    DragAndDropToObject                   "//div/img[@alt='abx']"            "xpath"           "abc"        "id"


    Multiexcerpt macro
    nameWindowsAuthenticationLogin
    Using this action, the user can login into applications that have basic authentication window. This action supports Internet Explorer and Firefox browsers only.

    WindowsAuthenticationLogin

    This action helps to login into the application using the basic Windows authentication. It is supported on Internet Explorer, Google Chrome, and Mozilla Firefox browsers on desktop Web only.

    Selenium does not support

    such window by default.This action is applicable only for desktop web applications. 
    This action use AutoIT to interact with the authentication windows. It Mandatory to install AutoIT to run this action.

    operations on such windows out-of-the-box when the browser is set to Internet Explorer. In order to achieve this condition on Internet Explorer browser, you must first install AutoIT to interact using Windows authentication.

    All the actions dependent on AutoIT are sensitive to the object

    focus.

    This action requires AutoIt to be installed.

  • Install AutoIT from the location http://www.autoitscript.com/site/autoit/downloads/
    • Click on

    focus.

    1. Download AutoIt v3.
    2. Choose
    full installation
    1. Full Installation.
    2. After the
    set up
    1. setup is completed, set the AutoIT installation
    path should be set against the Qualitia's configfile key "AutoITPath"
    1. folder path in Qualitia Configuration Settings.
      1. Log on to Qualitia Automation Studio. 
      2. On the File menu, click Setting > Configuration Setting > Dependency.
      3. In AutoITInstall Path, select the AutoIT installation folder path. 
        For example:C:\Program Files\Auto IT or C:\Program Files(x86)\Auto IT

      4. Click OK.


    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    url

    The url of the application to be navigated

    Enter the URL to the web application.

    Yes

    String

    Username

    The correct/valid

    Enter the username to

    logon

    sign in.

    Yes

    String

    Password

    The correct/valid

    Enter the password to

    logon

    sign in.

    Yes

    String

    Example:

    WindowsAuthenticationLogin                      "http://www.abc.com"               "testuser1"        "passwduser1"

    (warning)

    (warning) This action is tested on

    IE9 and FF23

    IE 11, Chrome 71, and Firefox 63.


    Multiexcerpt macro
    nameStoreChildCount

    StoreChildCount

    This action stores the child count for the

    given

    specified locator. The action counts the last element in the

    xpath

    Xpath which are placed inside the parent hierarchy. The child elements to be counted can be immediate children/descendants. The user should pass relevant

    xpath

    Xpath to achieve children/descendants count.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type 

    locator

    The xpath of the object whose child count is to be retrieved.

    It is mandatory that the input should be an xpath locator. This action will fail for any other locator type.

    Yes

    String

    key

    The variable/key in

    Enter the key name under which the count will be stored.

    Yes

    String

    Example
    StoreChildCount                      "//table[@id='12']/tbody/tr/td/div"         "

    variable"

    Key"


    Multiexcerpt macro
    nameDownloadFile

    DownloadFile

    This action clicks the link/element which will populate a download window, and then downloads the file.

    The action supports and is explicitly tested for FF3, IE7, IE8. The action will not wait till the file is downloaded, this

    have

    has to be

    handle

    handled externally by the user.

    This action requires AutoIt to be installed.

    1. Install AutoIT from the location http://www.autoitscript.com/site/autoit/downloads/
    2. Click on Download AutoIt v3.
    3. Choose full installation.
    4. After the set up is completed, AutoIT installation path should be set against the Qualitia's configfile key "AutoITPath"

    Input Parameters:


    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    locator

    The download link/element which is to be click.

    Yes

    String

    locatorType

    The type of locator used for the locator of the file input object. This could be Id, xpath, name, css class

    Yes

    String

    folderPath

    Parameter Description

    Mandatory

    Data Type

    folderName

    The path where the file is to be download. Please check Table 1 "Parameter Mandate" to validate in the situation where this parameter will be mandatory. In case the parameter Mandatory; the user should take care that the folder path exists. The action does not validates whether the folder exist

    Yes

    String

    filename

    Filename

    The filename of the downloadable file, to be given incase the user requires to give specific name and not depend on the default name of the file. In case, the file already exist, similar window like below will appear. Such windows are not handled by the action. Incase, the user does not provide this data, the action will pick the default file name available while download.

     This parameter is not mandatory

    NO

    String

    Expand
    Image Removed
    Image Removed
    Image Removed
    Image Removed

    No

    String






    Example 
    DownloadFile               "

    //a[@id='Download']" "xpath" "D:\Download" "xyz.zip" 
    Note:This

    C:/ProgramData"              "Qualitia" 
     This action is tested on IE8, FF & chrome. This action is not supported on IE9, IE10,

    chrome<16

    and Google Chrome <16.

    WaitForPageToLoad

    This actions waits for the page to load for the specified number of seconds. If the wait time is "" then the wait time value is taken from the "SyncTimeSync Time" time set on under the Qualitia Configuration (Execution) window. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    waitTime

    The

    Enter the number of seconds to wait.

    Yes

    String

    Example:
    WaitForPageToLoad                        "10"

    In Webdriver, we wait for the object to come in ready state. If it is in ready state it is assumed that the page is loaded completely and Webdriver will stop waiting. The condition to wait till the object is in ready state and assume that the page is loaded could however not work as expected at all times.

    RefreshPage

    This action simulates the user clicking the Refresh button of the current page selected.refresh operation on the currently selected page.

    This action does not have any parameter. 

    Example:

    RefreshPage

    DeleteCookiesOnCurrentDomain

    This action deletes all the cookies that are visible to the current domain. 

    This action does not have any parameter. 

    If the page is www.google.co.in and the user runs the above action, then all the cookies created by www.google.co.in will be deleted.

    If there is a link in www.google.co.in and on clicking, it navigates to www.apple.com.

    Again , when the user runs the above action, then all the cookies create by www.apple.com will be deleted.

    Reiterating, to delete www.google.co.in cookies, the application needs to be in www.google.co.in domain.

    This action will automatically, pick up the current domain and will delete cookies of that domain. The user just needs to make sure that he runs this action only in the domain for which the cookies are to be deleted.

    Note: In HTML, due to security reasons, the only website that can read/delete a cookie is the one that creates it.

    Example:
    DeleteCookiesOnCurrentDomain

    AcceptDialogAndStoreMessage

    This action clicks the OK button on accepts the dialog appeared on the Webpage Web page and stores the message in under the specified key. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    Key

    Enter the Key key in whcich which the message will be stored.

    Yes

    String


    Example:
    AcceptDialogAndStoreMessage                  "AlertMessage"

    WriteToBuildProperty

    This action writes a user defined property along with its value to qer.properties file. This customized information can be used in email notifications sent by Jenkins provided all the required Email email specific settings are done there in Jenkins.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    propertyName

    Property name to be written in qer.properties file

    Yes

    String

    propertyValue

    Property value to be written in qer.properties file

    Yes

    String

    Example:
    WriteToBuildProperty             "propertyName"                 "propertyValue"

    NoOps

    This is a placeholder action and cannot be executed. Qualitia selects this action for the steps present under the activity when auto-populating test case. Qualitia users

    You are expected requested to replace this action with required Qualitia executable action.

    This action does not have any parameter. 

    When executing test cases without replacing with this action, test cases are will be failed to notify Qualitia users about replacing such actions.