Versions Compared

Old Version 5

changes.mady.by.user ravi.chandran

Saved on

compared with

New Version Current

changes.mady.by.user ravi.chandran

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

VerifyExistence

This action verifies the existence of the specified object. 

VerifyExistence

This action verifies the existence of the specified object. 
Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

existence

Value for this parameter can be true or false.

  • Set True if you want to check the existence.
  • Set False if you want to check the non-existence.

No

String

Example: VerifyExistence                      "True"

VerifyVisibility

This action verifies the visibility of the specified object.
Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

visibility

Value for this parameter can be true or false.

  • Set True if you want to check the visibility.
  • Set False if you want to check the invisibility.
    Note: If you do not enter any value, the default value is set to True during the test case execution.

No

String

Example: VerifyVisibility                      "True"


WebObject.StoreVisibility 

This action stores the visibility status for a web element under the specified key name in the following conditions:

  • True: If the web element is visible.
  • False: If the web element is not visible.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

strKey

Enter a variable to store the visibility status.
No

String

Example: WbObject.StoreVisibility   "Key"

Click

This action clicks the specified object.
This action does not have any parameter.
Example:Click

StorePropertyValue

This action stores the property of the specified object under the key name. The stored key value can be retrieved using the key name.
Some Android and iOS properties are not accessible.
List of accessible properties for Android: "name", "contentDescription", "className", "resourceId", "text", "enabled", "checkable", "checked", "clickable", "focusable", "focused", "longClickable", "scrollable", "selected", "displayed"
List of accessible properties for iOS: "name", "value", "label", "hint"
Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Key

Enter the key name under which the property value will be stored.

Yes

 String

Property

Property/attribute name whose value needs to be stored under the specified key. This can be any accessible property of Android/iOS native object mentioned above.

Yes

 String

Example: StorePropertyValue                            "key"                     "text"

SetFocus

This action sets the focus on the specified object.
This action does not have any parameter. 
Example: SetFocus

VerifyEnability

This action verifies the enability of the specified object. 
Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

enability

Value for this parameter can be true or false.

  • Set True if you want to verify that the object is enabled. 
  • Set False if you want to verify that the object is disabled.
    Note: If you do not enter any value, the default value is set to True during the test case execution.

No

String

Example: VerifyEnability                          "True"

ClickAt

This action clicks at the specified point on the object.
Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

X

The x-coordinate of the click.

No

String

Y

The y-coordinate of the click.

No

String

Example ClickAt        "5"            "10"

On this page:

Table of Contents
maxLevel2
minLevel2

IsSelect

This action verifies whether the specified radio button is selected or not.
Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

existence

state

Value

for

of this

parameters

parameter can be true or false.

  • Set True if you want to check the
existence
  • selection.
  • Set False if you want to check the
non-existence
  • deselection.

No

String

Example:

VerifyExistence

IsSelect                        "True

"VerifyVisibility

"

Select

This action selects the specified radio button.

This action does not have any input parameter.

Example: Select

SelectByIndex

This action

verifies

selects the

visibility of the specified object.
  • Set True if you want to check the visibility.
    • Set False if you want to check the invisibility.

    specified radio button based on its index number. The index starts from 1. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    visibility

    Value for this parameters can be true or false.

    groupName

    Enter the group name under which the radio button to be selected belongs to. This is the name attribute in html.

    Yes

    String

    index

    Enter the index of the radio button from the group which you want to select. Index starts at 1

    No

    String

    Example:

    VerifyVisibility

    SelectByIndex               "Selection"         

      

         "

    True

    3"

    WebObject.StoreVisibility 

    SelectByValue

    This action

    stores the visibility status for a web element under the specified key name in the following conditions:
    • True: If the web element is visible.
    • False: If the web element is not visible.

    selects the specified radio button as per its value. 
    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    StoreVisbility
    groupName
    Enter
    the Strkey
    the group name which contains the radio button that you want to
    save.No

    String

    Example: StoreVisibility   "Key"

    Click

    This action clicks the specified object.
    This action does not have any parameter.
    Example:Click

    StorePropertyValue

    This action stores the property of the specified object under the key name. The stored key value can be retrieved using the key name.
    Some Android and iOS properties are not accessible.
    List of accessible properties for Android: "name", "contentDescription", "className", "resourceId", "text", "enabled", "checkable", "checked", "clickable", "focusable", "focused", "longClickable", "scrollable", "selected", "displayed"
    List of accessible properties for iOS: "name", "value", "label", "hint"
    select. This is the name attribute in html
    		YesString

    value

    Enter the value of the check box to be selected. 

    Yes

    String

    Example:
    SelectByValue                             "Occupation"

    SelectIfTrue

    This action selects the radio button, only if the parameter passed is true. Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    check

    Value for this parameter can be true or false. 

    No

    True

    Example SelectIfTrue          "True"

    StoreExistence

    This action stores existence of the object under the specified key. The key value can be retrieved using the key name. 
    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    Key

    Enter the key name under which the

    property

    existence's Boolean value will be stored.

    Yes

     String

    Property

    Property/attribute name whose value needs to be stored under the specified key. This can be any accessible property of Android/iOS native object mentioned above.

    Yes

     String

    Example: StorePropertyValue        

     

    • Stores True if the object exists.
    • Stores False if the object does not exist.

    Yes

    String

    Example:
    StoreExistence                      

    "key"  

           

             

    "

    text

    Key"

    SetFocus

    StoreChildCount

    This action

    sets the focus on

    stores the child count of the specified object

    .
    This action does not have any parameter. 
    Example: SetFocus

    VerifyEnability

    This action verifies the enability of the specified object. No

    under the specified key. The key value can be retrieved using the key name.
    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    enability

    Value for this parameters can be true or false.

    • Set True if you want to verify that the object is enabled. 
    • Set False if you want to verify that the object is disabled.

    Key

    Enter the key name under which the child count will be saved.

    Yes

    String

    Example:

    VerifyEnability


    StoreChildCount                          

      

        "

    True

    Key"

    ClickAt

    ClickJS

    This action clicks

    at

    the specified

    point on the object.
    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    X

    The x-coordinate of the click.

    No

    String

    Y

    The y-coordinate of the click.

    No

    String

    Example ClickAt        "5"            "10"

    On this page:

    Table of Contents
    maxLevel2
    minLevel2

    IsSelect

    This action verifies whether the specified radio button is selected or notobject from the web application under test.

    This action does not have any parameter.

    Note: ClickJS uses javascript code to perform the click action. Qualitia recommends using this action for web applications.

    Example:

    ClickJS

    ClickJSAndSelectWindowUsingURL

    This action is used to click the web element or object that opens single or multiple windows from which a specific window is selected.
    This action accepts 'waitTimeForWindow' for the specific window to open.

    This action is used in the following 2 scenarios:

    • When a single window opens after clicking the web element/object, you need to give only 'waitTimeForWindow' parameter. 
    • When multiple windows open after clicking the web element or object, then you can provide the exact URL or regex patterned URL  window. You must give the URL and 'isURLPatternString' parameters.
      Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    state

    Value of this parameter can be true or false.

  • Set True if you want to check the selection.
    • Set False if you want to check the deselection

    waitTimeForWindow

    Enter the wait time for the window to open.

    Yes

    String

    URL

    Enter a specific URL or regex pattern of URL for the window you want to select.

    		NoString

    Example: IsSelect                        "True"

    Select

    This action selects the specified radio button.

    This action does not have any input parameter.

    Example: Select

    SelectByIndex

    This action selects the specified radio button based on its index number. The index starts from 1. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    groupName

    Enter the group name under which the radio button to be selected belongs to. This is the name attribute in html.

    Yes

    String

    index

    Enter the index of the radio button from the group which you want to select. Index starts at 1

    No

    String

    Example:

    SelectByIndex               "Selection"
    isURLPatternString

    Enter one of the following:

    • True: If you want to apply the regex pattern to URL.
    • False: If you do not want to apply the regex pattern to URL.
    		NoString

    Example 1

    String waitTimeForWindow : "5",

    String url : null(do not give any value)

    String isURLPatternString : null(do not give any value)

    Expected Result - Here you do not need to provide URL or isURLPatternString as after clicking the object or element opens. The action waits up to 5 seconds for the window to appear after clicking the web element or object and then select the window.

    Example 2

    String waitTimeForWindow - "5",

    String url - "https://bflsme--preprod.cs57.my.salesforce.com/_ui/common/data/LookupPage?                                                            "3"

    SelectIfTrue

    This action selects the radio button, only if the parameter passed is true. Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    check

    Value for this parameter can be true or false. 

    No

    True

    Example SelectIfTrue          "True"

    StoreExistence

    This action stores existence of the object under the specified key. The key value can be retrieved using the key name. 
    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    Key

    Enter the key name under which the existence's Boolean value will be stored. 

    • Stores True if the object exists.
    • Stores False if the object does not exist.

    Yes

    String

    Example:
    StoreExistence                               "Key"

    StoreChildCount

    This action stores the child count of the specified object under the specified key. The key value can be retrieved using the key name.
    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    Key

    Enter the key name under which the child count will be saved.

    Yes

    String

    Example:
    StoreChildCount                               "Key"

    ClickJS

    This action clicks the specified object from the web application under test.

    This action does not have any parameter.

    Note: ClickJS uses javascript code to perform the click action. Qualitia recommends using this action for web applications.

    Example:

    ClickJS

    ClickAction

    This action clicks the specified object from the web application under test.

    This action does not have any parameter.

    Note: ActionClick uses underlying selenium WebDriver "Action" class to perform click action. Qualitia recommends using this action for web applications.

    Example:
    ClickAction

    WaitForSelectionStateToBe

    This action waits for the object to go to the specified state lkfm=editPage&lknm=cas3&lktp=003&lksrch=",

    String isURLPatternString - "False",

    The action waits for up to 5 seconds for multiple windows to appear after clicking web element or object and it selects the window with the url "https://bflsme--preprod.cs57.my.salesforce.com/_ui/common/data/LookupPage?lkfm=editPage&lknm=cas3&lktp=003&lksrch=". As the isURLPatternString parameter is 'false' , the action finds as per the given URL.  

    Example 3

    String waitTimeForWindow - "5",

    String url - "www.([A-Z])\w+",

    String isURLPatternString - "True",

    Expected Result - The action waits for up to 5 seconds for multiple windows to open after clicking web element/object and it selects the window which matches the regex pattern  "www.([A-Z])\w+" as provided in the URL parameter. As the isURLPatternString parameter is 'True', the action treats the URL parameter as a regex pattern. In case there are multiple windows satisfying the regex pattern, the action selects the first window.  

    ClickAction

    This action clicks the specified object from the web application under test.

    This action does not have any parameter.

    Note: ActionClick uses underlying selenium WebDriver "Action" class to perform click action. Qualitia recommends using this action for web applications.

    Example:
    ClickAction

    WaitForSelectionStateToBe

    This action waits for the object to go to the specified state. You may specify the timeout and polling interval, if required.
     Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    expectedSelectionState

    Enter the expected selection state. Set True for selection and False for deselection.

    No

    Boolean

    timeOut

    Enter the timeout (in seconds) to wait for the object to get selected.     

    No

    Integer

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the selection of the object before exhausting timeout. 

    No

    Integer

    keySelectionState

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect.

    No

    String

    Example:
    WaitForSelectionStateToBe          "False"        "5"          "500"       "Key"       "Defect"

    WaitForSelection

    This action waits till the specified object gets selected. You may specify the timeout and polling interval, if required.
     Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    expectedSelectionState

    Enter the expected selection state. Set True for selection and False for deselection.

    Yes

    Boolean

    required.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    timeOut

    Enter the timeout (in seconds) to wait for the object to get selected.     

    No

    Integer

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the selection of the object before exhausting timeout. 

    No

    Integer

    keySelectionState

    keySelection

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1

    for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect.

    No

    String

    Example:
    WaitForSelectionStateToBe          "False"        "5"          "500"       "Key"       "Defect"

    WaitForSelection

    This action waits till the specified object gets selected. You may specify the timeout and polling interval, if required.

    for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect.

    No

    String

    Example:

    WaitForSelection      "5"          "500"     "Key"       "Defect"

    DoubleClick

    This action double-clicks the specified web element.
    Example:

    DoubleClick


    DownloadFile

    This action clicks the link/element that opens a download window, which is used to download the files. You need to handle the action externally as it does not wait until the file is downloaded.

    Qualitia uses its internal mechanism to handle the Download File pop-up screen.

    Info

    You can also use AutoIT to execute this action on Windows operating systems only. You need to install AutoIT.

    After installing AutoIT, you can configure the AutoIT Install path in Qualitia client as follows: Project Configuration > General > Settings > AutoIT Install Path. The default AutoIT path is C:\Program Files (x86)\AutoitV3.

    To configure the Auto Install Path for an offline suite:

    • Open the Qualitia Offline Configuration Manager.
    • Select the Offline Suite and the associated execution profile.
    • Click Qualitia Settings > General > AutoIT Path.


    Input Parameters:


    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    timeOut

    Enter the timeout (in seconds) to wait for the object to get selected.     

    No

    Integer

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the selection of the object before exhausting timeout. 

    No

    Integer

    keySelection

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect

    FolderName

    The path where the file is to be download. Please check Table 1 "Parameter Mandate" to validate in the situation where this parameter will be mandatory. In case the parameter Mandatory; the user should take care that the folder path exists. The action does not validates whether the folder exist

    Yes

    String

    Filename

    The filename of the downloadable file, to be given incase the user requires to give specific name and not depend on the default name of the file. In case, the file already exist, similar window like below will appear. Such windows are not handled by the action. Incase, the user does not provide this data, the action will pick the default file name available while download.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect.

    No

    String

    Example:



    WaitForSelection      "5"  Image Added Example:
    Image Added

    Image Added


    Image Added

    Image Added
    Example 

    DownloadFile           "500"     "KeyC:/ProgramData"           "Defect"

    DoubleClick

    This action double-clicks the specified web element.
    Example:

    DoubleClickQualitia" 

    DragAndDropToOffset

    This action drags and drops the specified web element at the specified location. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    offsetX

    Enter the offset in pixels from the current location to which the element should be moved. The offset parameter can be as +100,100 , -100, 10, and so on.

    Yes

    String

    offsetY

    Enter the offset in pixels from the current location to which the element should be moved. The offset parameter can be as -100,100 , +100, and so on.

    Yes

    String

    Example:

    DragAndDropOffset            "100"              "500"

    MouseDown

    This action simulates left-click at the specified location on the screen.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    X

    The x-coordinate of the click.

    No

    String

    Y

    The y-coordinate of the click.

    No

    String

    Example:

    MouseDown                 "5"           "10"

    MouseUp

    This action simulates the event that occurs when the user releases the mouse button.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    X

    The x-coordinate of the click.

    No

    String

    Y

    The y-coordinate of the click.

    No

    String

    Example

    MouseUp         "5"          "10"

    MouseOver

    This action simulates a mouse hovering over the specified object.

    This action does not have any parameter. 

    Example:

    MouseOver

    RightClick

    This action right-clicks the specified web element.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    option

    The context menu option number that needs to be clicked.

    YesNo

    String

    Example:

    RightClick             "3''

    This will select the third option from the context-menu.

    ScrollIntoView

    This action scrolls to view the specified object. 

    This action does not have any parameter. 

    Example:

    ScrollIntoView

    ScrollIntoView

    This action scrolls to view the specified object. 

    This action does not have any parameter. 

    Example:

    ScrollIntoView

    Multiexcerpt include macro
    nameSendKeySequence
    pageWebEdit Actions

    SetValueAttribute

    This action sets the data specified in the 'value' attribute of the object.

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    value

    Enter the value to be added for the Value attribute.

    Yes

    String

    Example:

    SetValueAttribute           "#ff0990"

    StoreCSSProperty

    This action stores the CSS property value of the object under the specified key. Key value can be retrieved using the key name. 

    Input Parameters:

    key name under which the property value will be stored. 

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    propertykeyProperty

    Enter the key name under which the property name whose value you want to store.value will be stored. 

    Yes

    StringkeyProperty

    propertyEnter the property name whose value you want to store.YesString

    Example:

    StoreCSSProperty        "display"            "Key"

    StoreLocation

    This action stores the current location of the object under the specified keys. The key values can be retrieved using the key names. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    keyHeightkeyXPosition

    Enter the key name to store the height of the location of the object.

    Yes

    String

    keyWidthkeyYPosition

    Enter the key name to store the width of the location of the object.

    Yes

    String

    Example:

    StoreLocation        "Height"            "Width"

    StoreSize

    This action stores the size of the specified object under keys. The key values can be retrieved using key names.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    keyXPosition

    Enter the key name under which you want to store the height of the object.

    Yes

    String

    keyYPosition

    Enter the key name under which you want to store the width of the object.

    Yes

    String

    Example:

    StoreSize           "Height"                   "Width"

    StoreText

    This action stores the text existing inside the specified object under the specified keys. The key values can be retrieved using the key names. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    keyText

    Enter the key name to store the text from the specified object.

    Yes

    String

    Example:

    StoreText        "Key" 

    StoreValueAttribute

    This action stores the data present in the 'value' attribute of the object.

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    keystrKey

    Enter the key name under which the value will be stored. Enter the value to be added for the Value attribute. Key value can be retried using the key name.

    Yes

    String

    Example:

    StoreValueAttribute        "Key"

    VerifyEnability

    This action verifies the enability of the specified object. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    enability

    Value for this parameters parameter can be true or false.

    • Set True if you want to verify that the object is enabled. 
    • Set False if you want to verify that the object is disabled.

    Yes

    String

    Example:

    VerifyEnability                          "True"

    WaitForAttributeNotContains

    This action waits until the specified attribute's value of the object changes to other than the partial parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.   

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    attributeName

    Enter the attribute name whose value you want to check.

    Yes

    String

    attributeValue 

    Enter the value which should not be there in the attribute value.

    Yes

    String

    timeOut

    Enter the timeout (in seconds) to wait for the value to change. 

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for existence of the unexpected value before exhausting timeout.

    No

    String

    keyAttributeValue

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForAttributeValueContains      "id"           "232waf"        "5"          "500"     "Key"       "Defect"

    WaitForAttributeContains

    This action waits till the value of the specified attribute changes to the expected partial value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.  

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    attributeName

    Enter the attribute name whose value you want to check.

    Yes

    String

    attributeValue 

    Enter the partial expected partial attribute value.

    Yes

    String

    timeOut

    Enter the timeout (in seconds) to wait for the expected value. 

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout. 

    No

    String

    keyAttributeValueContains

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForAttributeContains      "id"           "we323es"        "5"          "500"     "Key"       "Defect"

    WaitForAttributeNotToBe

    This action waits until the specified attribute's value of the object changes to other than the exact parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.  

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    attributeName

    Enter the attribute name whose value you want to check.

    Yes

    String

    attributeValue 

    Enter the value which should not be there in the attribute value.

    Yes

    String

    timeOut

    Enter the timeout (in seconds) to wait for the value to change. 

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout. 

    No

    String

    keyAttributeValueNotToBe

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForAttributeNotToBe      "id"           "232waf"        "5"          "500"     "Key"       "Defect"

    WaitForAttributeNotToBeEmpty

    This action waits until the specified attribute's value of the object gets filled with some value. You may specify the timeout and polling interval, if required.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    attributeName

    Enter the attribute name whose value you want to check.

    Yes

    String

    timeOut

    Enter the timeout (in seconds) to wait for the attribute value.  

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the attribute value before exhausting timeout. 

    No

    String

    keyAttributeValue

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForAttributeNotToBeEmpty      "id"           "5"          "500"     "Key"       "Defect"

    WaitForAttributeToBe

    This action waits till the value of the specified attribute changes to the exact expected value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.   

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    attributeName

    Enter the attribute name whose value you want to check.

    Yes

    String

    attributeValue 

    Enter the exact expected value.

    Yes

    String

    timeOut

    Enter the timeout (in seconds) to wait for the expected value. 

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout. 

    No

    String

    keyAttributeValue

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForAttributeToBe         "id"           "232waf"        "5"          "500"     "Key"       "Defect"

    WaitForAttributeToBeEmpty

    This action waits until the specified attribute's value of the object gets empty. You may specify the timeout and polling interval, if required.  

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    attributeName

    Enter the attribute name whose value you want to check.

    Yes

    String

    timeOut

    Enter the timeout (in seconds) to wait for the attribute value to be empty.  

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the attribute value before exhausting timeout. 

    No

    String

    keyAttributeValue

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:
    WaitForAttributeToBeEmpty      "id"           "5"          "500"     "Key"       "Defect"

    WaitForChildElement

    This action waits for the child elements of the specified object to appear. You may specify the timeout and polling interval, if required.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    childLocatorType

    Enter the locator type of the object whose child you want to check.

    Yes

    String

    childLocatorValue

    Enter the locator value of the child you want to check. 

    Yes

    String

    timeOut

    Enter the timeout (in seconds) to wait for the elements to appear. 

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. 

    No

    String

    keyExistence

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:
    WaitForChildElement      "id"       "2"         "5"          "500"     "Key"       "Defect"

    WaitForClickability

    This action waits for the specified object to be clickable. You may specify the timeout and polling interval, if required.  

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    timeOut

    Enter the timeout (in seconds) to wait for the object to be clickable.   

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the object clickability before exhausting timeout. 

    No

    String

    keyClickability

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:
    WaitForClickability     "5"          "500"     "Key"       "Defect"

    WaitForExistence

    This action waits for the existence of the specified object. You may specify the timeout and polling interval, if required. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    timeOut

    Enter the timeout (in seconds) to wait for the existence of the object.   

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the existence of the object before exhausting timeout. 

    No

    String

    keyExistence

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:
    WaitForExistence     "5"          "500"     "Key"       "Defect"

    WaitForInnerTextContains

    This action waits for the object to contain the expected partial text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    innerText

    Enter the expected text you want to wait for.

    Yes

    String

    timeOut

    Enter the timeout (in seconds) to wait for the expected text.   

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. 

    No

    String

    keyInnerTextContains

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:
    WaitForInnerTextContains          "Connect"       "5"       "500"     "Key"       "Defect"

    WaitForInnerTextMatchesPattern

    This action waits for inner text from the specified object to match the expected text regular expression pattern. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    innerTextRegXPattern

    Enter the expected pattern for the inner text. Pattern should be regular expression. Step fails in case the pattern is invalid.

    Yes

    String

    timeOut

    Enter the timeout (in seconds) to wait for the expected text.   

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. 

    No

    String

    keyInnerText

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForInnerTextMatchesPattern           ".[My]text."       "5"       "500"     "Key"       "Defect"

    WaitForInnerTextNotContains

    This action waits until the specified attribute's value of the object changes to other than the parameterized value. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    innerText

    Enter the text which should not be there in the attribute value. 

    Yes

    String

    timeOut

    Enter the timeout (in seconds) to wait for the inner text to disappear.    

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the expected text to be disappeared before exhausting timeout. 

    No

    String

    keyInnerTextNotContains

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForInnerTextNotContains          "Connect"       "5"       "500"     "Key"       "Defect"

    WaitForInnerTextNotToBe

    This action waits till the inner text of the object changes from the specified text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    innerText

    Enter the text which should not be there in the object.

    Yes

    String

    timeOut

    Enter the timeout (in seconds) to wait for the text to change.   

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. 

    No

    String

    keyInnerTextNotToBe

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForInnerTextNotToBe          "Connect"       "5"       "500"     "Key"       "Defect"

    WaitForInnerTextToBe

    This action waits for the object to contain the expected exact text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    innerText

    Enter the expected text you want to wait for.

    Yes

    String

    timeOut

    Enter the timeout (in seconds) to wait for the expected text.   

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. 

    No

    String

    keyInnerText

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForInnerTextToBe          "Connect"       "5"       "500"     "Key"       "Defect"

    WaitForInvisibility

    This action waits for the object to invisible. You may specify the timeout and polling interval, if required. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    timeOut

    Enter the timeout (in seconds) to wait for the object to go invisible.    

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the invisibility before exhausting timeout. 

    No

    String

    keyInvisibility

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForInvisibility     "5"          "500"     "Key"       "Defect"

    WaitForNonClickability

    This object waits for the object to become non clickable. You may specify the timeout and polling interval, if required. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    timeOut

    Enter the timeout (in seconds) to wait for the object to become non clickable.     

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the clickability before exhausting timeout. 

    No

    String

    keyNonClickability

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForNonClickability      "5"          "500"     "Key"       "Defect"

    WaitForNonExistence

    This action waits for the non existence of the specified object. You may specify the timeout and polling interval, if required. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    timeOut

    Enter the timeout (in seconds) to wait for the non existence of the object.   

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for non existence of the object before exhausting timeout. 

    No

    String

    keyNonExistence

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForNonExistence     "5"          "500"     "Key"       "Defect"

    WaitForNumberOfElementsToBe

    This action waits for the number of elements of the specified object locator on the page to be same as the expected number. You may specify the timeout and polling interval, if required.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    numberexpectedNumOfElements

    Enter the expected number of elements to wait for.

    YesNo

    Integer

    timeOut

    Enter the timeout (in seconds) to wait for the number elements to appear. 

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. 

    No

    String

    keyNumberOfElements

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForNumberOfElementsToBe       "2"         "5"          "500"     "Key"       "Defect"

    WaitForNumberOfElementsToBeLessThan

    This action waits for the number of elements of the specified object locator on the page to be less than the specified number. You may specify the timeout and polling interval, if required.
     

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    expectedNumOfElements

    Enter the expected number of elements to wait for.

    YesNo

    String

    timeOut

    Enter the timeout (in seconds) to wait for the number elements to appear. 

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. 

    No

    Integer

    keyNumOfElementsLessThan

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForNumberOfElementsToBeLessThan       "2"         "5"          "500"     "Key"       "Defect"

    WaitForNumberOfElementsToBeMoreThan

    This action waits for the number of elements of the specified object locator on the page to be more than the specified number. You may specify the timeout and polling interval, if required.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    expectedNumOfElements

    Enter the expected number of elements to wait for.

    No

    Integer

    timeOut

    Enter the timeout (in seconds) to wait for the number elements to appear. 

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. 

    No

    String

    keyNumOfElementsLessThan

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForNumberOfElementsToBeMoreThan       "2"         "5"          "500"     "Key"       "Defect"

    WaitForStaleness

    This action waits until the element gets detached from the DOM. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    timeOut

    Enter the timeout (in seconds) to wait for the value to be detached.  

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for existence of the element before exhausting timeout. 

    No

    String

    keyStatus

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForStaleness        "5"          "500"     "Key"       "Defect"

    WaitForVisibility

    This action waits for the object to be visible. You may specify the timeout and polling interval, if required. 

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    timeOut

    Enter the timeout (in seconds) to wait for the object visibility.    

    No

    String

    pollingInterval

    Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. 

    No

    String

    keyVisibility

    Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.

    No

    String

    statusIfConditionNotSatisfied

    Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.

    No

    String

    Example:

    WaitForVisibility     "5"          "500"     "Key"       "Defect"

    WaitForObject (Deprecated)

    This action waits for the object to appear or disappear for the maximum number of seconds specified.
    If the object is found or not found before the maximum time specified, execution continues to the next steps.
    If the wait time is "" then the wait time shall be the "Sync Time" set in the associated execution profile.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    waitTime

    Enter the number of seconds to wait for the object to appear or disappear. This has to be 0 or any positive number.

    Yes

    String

    existence

    Value for this parameter can be true or false.

    • Set true if you want to check for the appearance of the object.
    • Set false if you want to check for the disappearance of the object.

    Yes

    String

    Example:

    WaitForObject           "10"            "true"The action waits for maximum 10 seconds for the object to appear. If the object appears before 10 seconds elapses, execution continues to the next steps. WaitForObject         "15"          "False"The action shall wait for maximum 15 seconds for the object to disappear. If the object disappears before 15 seconds elapses,execution continues to the next steps.

    ClickAndWait (Deprecated)

    This action clicks the specified object and waits for the seconds specified in Sync Time in the associated execution profile.

    Default value is 20 seconds. If the page loads before reaching the maximum sync time execution continue to the next steps. 

    This action does not have any parameter. 

    Example:

    ClickAndWait

    Webdriver waits for the document to come in ready state. If it is in ready state it is assumed that the page is loaded completely and Webdriver stops waiting. The condition to wait till the document to load in ready state and assume that the page is loaded could however not work as expected at all times.

    ClickandchooseOkOnNextConfirmation (Deprecated)

    This action handles the alert or confirmation that comes up post clicking the OK button. This action fails if the button is clicked and no alert or confirmation comes up.

    This action does not have any parameter.

    Example:

    ClickandchooseOkOnNextConfirmation

    DragAndDropToOffset (Deprecated)

    This action drags and drops the specified web element at the specified location.  You are recommended to use DragAndDropToObject.

    Input Parameters:

    Parameter Name

    Parameter Description

    Mandatory

    Data Type

    offsetX

    Enter the offset in pixels from the current location to which the element should be moved. The offset parameter can be as +100,100 , -100, 10, and so on.

    No

    String

    offsetY

    Enter the offset in pixels from the current location to which the element should be moved. The offset parameter can be as -100,100 , +100, and so on.

    No

    String

    Example:

    DragAndDropOffset            "100"              "500"