Introduction

These release notes provide information about the new features added to Qualitia Automation Studio. They also provide details about the enhancements done, bugs fixed, and known issues in this release.

...

We are happy to announce the release of Qualitia Automation Studio 8.3.24.

We are bringing you some exciting new features that will take user experience to a whole new level.

With every step, we strive to make automation development with Qualitia even easier, even faster, and even more reliable.

Qualitia Automation Studio 8.3.4 Release Notes

What’s New?

• Enhanced the user experience for environment variables to enable environment variable management for a project easily. The variables are automatically shared across all the project users. You can now also overwrite the values of the variables at local level

...

• for customizations.

• The Perfecto API has been added to support File Upload.The Perfecto File upload API was changed by Perfecto. Hence, it was not possible to upload the artifacts to the repository using Qualitia Automation Studio. It was required to upload the artifacts to the repository manually and mention the repository storage path in the test case.
  You can now easily upload the artifacts to the repository using Qualitia Automation Studio by providing the local directory path of application file.

• A new setting called MaxSnapshotWriterQueueCapacity has been added to enable you to manage the queue capacity in the execution settings. In case you run out of memory and the logs say that the queue size is too large, you can adjust the queue capacity using the MaxSnapshotWriterQueueCapacity setting.

• Upgraded Log4j version to 2.17 to fix the Log4J vulnerability issue.

Bug Fixes

• Fixed the performance issues of suite execution by making execution JSONs available while starting the suite execution. This reduces the time taken to start the suite executions and avoids application going into non-responsive state.

• Fixed the Real Time Reporting issues where the state of suite was not aborted after 1 hour in case of unexpected error.

• Implemented retry mechanism in Qualitia Remote agent to try to get the test case artifacts from Qualitia server if first attempt fails.

• Introduced a setting to bypass validation for user permissions during Server installation, if necessary Database privileges are not set up in the Database configurations for the Database user performing the Qualitia server installation.

• Enabled database configuration wait time for Server setup to address latency issues between Qualitia Server and Database server.

• Fixed performance issues observed while adding a new test in a large suite.

• Fixed the issue of handling Azure DevOps suite names containing single quotes.

• Fixed the issue with encrypted environment variable values for overwriting the values of the variables from the command prompt/Azure DevOps executions.

• The threshold percentage values to be used to show warning for disk space in Real time reporting has been made configurable so that you can set thresholds lower than default values.

• Fixed the issue with incorrect execution profile selection by multiple users of a project.

• Fixed the issue in updating SVN/Git password in version control settings.

• Fixed the Real Time Report issue of RTR data not being displayed when large number of projects and suites are available for Azure SQL database.

• Fixed the issue with screenshot visibility in the Real Time Reports.

• Improved the message that is logged to understand cause of Failure of Sauce Tunnelling.

• Fixed the issue in desktop executions to display execution report after successfully closing UFT instance used for execution.

• Fixed the issue with statusIfConditionNotSatisfied parameter of the WaitForVisibility action.

• Fixed the issue when the task would not open and throw the "please update latest version of file" error.

• Fixed the acceptSSLCerts issue for execution.

Known Issues

• You may experience performance issues when editing a test case with large volume of test data associated with it.

• Execution fails to start for the suites having test cases with large test data iterations.

• Test data gets corrupt when the task steps are moved up or down.

• Mobile Object Spy, Mobile Recording, and Mobile execution do not support Android real devices and emulators with Android 11 operating system and above.

• Internet Explorer (IE) does not support Shadow DOM. Hence, IE Object Spy and IE Recorder do not support Shadow DOM Object Spying.

• SFDC objects do not support the following features:

  • Polling Interval and Time Out on object level

  • Wait actions

What’s New in SFDC Project?

The following two new actions have been introduced for SFDC project in this release:

• SFDC.SwitchUser: You can now record and execute the SFDC.SwitchUser action. You can use this action manually and execute.

• SearchAndClick: A new SFDC class called SFDCGlobalSearch has been introduced in Qualitia Automation Studio. When you perform a global search for a particular user or record, the SFDCGlobalSearch class enables you to record the SearchAndClick action along with its parameters and associated objects.

Enhancements in SFDC Project

• While capturing frame objects, frame hierarchy is now maintained for SFDC Objects.

• Execution for cross origin frame objects is now supported.

• New variant of inputDateTime component is now supported.

Issues Fixed in SFDC Project

• Fixed the SearchAndSelect lookup action issue.

• Fixed the fallback mechanism issue for Mobile Web Objects in SFDC project.

• Fixed the issue with Set and Clear InputDateTime action execution.

• Fixed a few defects related to Action enhancement.

• Fixed a few defects related to user interface of Chrome Object Spy, Mobile Object Spy and Recorder strap to improve the user experience.

Qualitia Automation Studio 8.3.3 Release Notes

Bug Fixes

• Fixed the Real-time reporting issues for longer executions where the suite execution details were not updated to the Reports dashboard.

• Fixed the Real-time reporting issue where the filter options did not work as expected for Azure SQL database if the number of project and suite executions are high.

• Fixed the issue on the Task screen to display appropriate error message when the XML file associated with the task is missing.

Known Issues

• FireFox Recorder uses the SetWindowSize action instead of MaximizeBrowser when the browser is maximized during recording.

• Currently, Mobile Object Spy and Mobile Recorder do not support the Shadow Dom feature.

• The "Highlighted object(s) does not exist on the current page" error message occurs for all objects even if the objects are highlighted. This is an intermittent issue for Object Spy.

• In Shadow DOM, Web ObjectSpy and Web Recorder do not support element with dynamic attributes which have non-null attribute value.

• Unknown error exception occurs while performing actions on the Shadow DOM object:
  For the Click and MouseOver actions, you can use the alternative actions ClickJS and MouseOverJS, respectively provided by Qualitia.
  For similar issues with other actions, contact Qualitia Customer Support.

• Test Case execution from ALM fails when the integrated Test Case is locked or out of sync, when the associated task is modified by some other Test Case or from the Task tab.
  To work around this issue, unlock the Test Case or open and save the impacted test case, and then execute the Test Case again from ALM.

• Commit from GIT fails for long file paths, though it works from GIT Bash. For example, C:\Users\localadmin\Documents\DND_QDS_Automation_Backup\DND_QDS_AutomationProject\Regression_Repo.
  To work around this issue, use short file path. For example, C:\.

• Mobile execution with the “_appiumOption” capability as “Automatic” does not work With ALM integration. ALM does not allow to connect to the appium server even when the server starts successfully at the localhost. Once ALM is disconnected, the appium server is connected successfully, and the TC executed as expected.
  To work around this issue, set the capability "_appiumOption" as "custom".

Qualitia Automation Studio 8.3.2 Release Notes

What’s New

Clone Execution Profiles

Qualitia Automation Studio now allows you to clone the existing execution profiles. You can clone an execution profile to copy its settings for creating a new execution profile.

Enhancements

• Qualitia Automation Studio (QAS) now supports Shadow DOM for Web Object Spy and Web Recorder.

• The QAS Recorder now has a constant ID that can be whitelisted for Google Chrome and Microsoft Edge.

• Added new web object actions and enhanced some existing ones to support Shadow DOM.

• Added actions in Desktop projects for classes present under Technology UI Automation and Oracle.

• You can now update the Qualitia Server settings from the Reporting portal.

• Improved logging for test case loading and saving to improve troubleshooting of the issues related to development flow.

Bug Fixes

• Added few missing desired capabilities.

• Fixed the screenshot trimming issue in the Qualitia execution report for the Desktop Capture mode.

• Fixed the behavior of Environment variable to read the variable values from the environment file.

• Fixed a few defects related to user interface enhancements to improve the user experience.

• Fixed upgrade related defects that were observed while upgrading from Qualitia 5.6 to 8.3.x.

• Fixed the issue related to incorrect publish status of test cases when only test data is changed in Azure DevOps integration.

• Fixed the issue related to overwriting the environment variables in Azure DevOps integrationexecutions/Offline executions when variable contains "=" in the value.

Known Issues

• FireFox Recorder uses the SetWindowSize action instead of MaximizeBrowser when the browser is maximized during recording.

• Currently, Mobile Object Spy and Mobile Recorder do not support the Shadow Dom feature.

• The "Highlighted object(s) does not exist on the current page" error message occurs for all objects even if the objects are highlighted. This is an intermittent issue for Object Spy.

• In Shadow DOM, Web ObjectSpy and Web Recorder do not support element with dynamic attributes which have non-null attribute value.

• Unknown error exception occurs while performing actions on the Shadow DOM object:
  For the Click and MouseOver actions, you can use the alternative actions ClickJS and MouseOverJS, respectively provided by Qualitia.
  For similar issues with other actions, contact Qualitia Customer Support.The fallback mechanism may not work as expected for the Mobile Web Objects in SFDC project. Qualitia recommends that you avoid performing mobile executions for the SFDC projects and MouseOver actions, you can use the alternative actions ClickJS and MouseOverJS, respectively provided by Qualitia.
  For similar issues with other actions, contact Qualitia Customer Support.

• Mobile execution with the “_appiumOption” capability as “Automatic” does not work With ALM integration. ALM does not allow to connect to the appium server even when the server starts successfully at the localhost. Once ALM is disconnected, the appium server is connected successfully, and the TC executed as expected.
  The workaround to this issue is to set the capability "_appiumOption" as "custom".

Qualitia Automation Studio 8.3.1 Release Notes

Automation Testing on Edge

Finally, the much-awaited test case creations and executions on Microsoft Edge has arrived!

You can use Edge to record a test case or install the Qualitia Object Spy add-on in it to capture the objects of your applications. Similarly, you can use Edge to execute test cases through the Qualitia client or offline package. Also, you can execute the test cases using Advanced Edge Capabilities, such as headless and incognito mode execution.

Integration of Azure DevOps with Offline Package

You can now quickly do the automation testing of Azure DevOps build and release pipelines by mapping them to offline suites. Also, the setup and configuration settings of Qualitia and Azure DevOps components can be done in few minutes.

For more information, refer to Azure DevOps with Offline Package.

Enhancements

• Improved the error highlighting in the Test Case Editor screen for the steps that contain empty or deleted objects. Now, the modified task steps are also highlighted if their test data is blank.

• Real Time Reporting now allows to filter offline suite results executed through Continuous Integration (CI) tool. Also, the offline suite results executed through CI tools now display the CI tool next to their names, such as Offline | Jenkins and Offline | Azure DevOps.

Bug Fixes

• Fixed the issue where the SVN client version was getting reset in the Scheduler suite executions.

• Updated the custom action return status handling when the return status values are not as expected by Qualitia.

• Now, you cannot edit the test data if all the test case steps use static data.

• Fixed issues in action execution.

• Fixed the issues where the suite execution results displayed cropped screenshots in different screen resolutions.

• Improved the Excel.StoreCellData action to read different data types from an Microsoft Excel file.

• Improved the performance of the Suites and Custom Actions screens.

• Improved the Settings screen.

• Some cosmetic changes are done in the product to improve the user experience.

Known Issues

Before executing a test case or a test suite on a custom browser profile, ensure that you close all the instances of the browser.

Qualitia Automation Studio 8.3.0 Release Notes

What’s New?

Innovations in SFDC Application Automation Testing

QAS now supports automation testing on an SFDC application by introducing the following features.

• Incorporated a custom-built locator type SFDC:Label to learn objects for the native SFDC application using Salesforce labels.
  When using the recorder or Chrome Object Spy with SFDC:Label, you can add SFDC objects in a more reliable manner that supports UI related changes.

• Introduced a new set of SFDC Actions that work with different SFDC objects.
  For more information, refer to SFDC Actions.

Innovations in Qualitia Automation Studio Web Recorder

Qualitia Automation Studio Web Recorder now supports recording of the following browser actions:

• OpenURL

• NavigateBack

• NavigateForward

• Refresh

• Delete Cookies

Enhancements

• Chrome Object Spy now enables you to:

  • Detach the Chrome Object Spy UI from the application under test page.

  • Learn objects for a child window in the following ways:

    • Opens another Chrome Object Spy to add child window objects.

    • Allows switching between a parent and a child window if you are using a common Chrome Object Spy UI.

• The locator preference is now saved locally so that it is preserved across all the Object Spy sessions for a user.

• You can now edit the Mandatory status for a custom action parameter though the action is added in a task or a test case.

• You can now increase the timeout to query the database to more than 30 seconds.
  To set the timeout value, open the Qualitia Server Settings file and specify the DatabaseQueryTimeout value as per your requirement.

• When the connection to the MS SQL database server fails, the Chrome Object Spy now displays an appropriate message to restore the database connection.

• Updated Git integration workflow to avoid continuous incorrect Task modification notification.

Bug Fixes

• Fixed the issue with saving test cases when large test data is attached with filters.

• The aborted scheduler executions now display the correct execution time in the reports and terminate after the predefined time period if no response is received for the execution progress.

• Updated the Qualitia Server to refresh the database connection when the database connection goes into a stale state due to a temporary connectivity issue.

• Fixed the issue that occurred while accessing the Reports and Dashboard due to blank spaces in the Qualitia Server URL.

• Fixed the issue with Reports and Dashboard login when the domain name of the Active Directory is different from the E-Mail ID domain.

• Fixed the issue where the work would be lost by automatic reload occurring due to a connection reset in Remote Desktop Connection.

Known Issues

General Known Issues

• The Text parameter of the Secureset action is not encrypted if you add its value from the Task Editor screen.

• Qualitia Offline Configuration utility does not display the Save and Cancel buttons though the utility is set to the recommended 1920*1080 display resolution and text size to 150%.
  To display the Save and Cancel buttons, change the display resolution of the utility to 1366*768 and its text size to 100%.

• Qualitia Mobile Object Spy and Qualitia Automation Mobile Recorder do not support the Android SDK Build Tools having version 30 or higher.

• After you import a task into a current project and update the corresponding task in the import project to add or delete a step, and then revert the changes, then in the Import screen, the import project task is displayed under the Conflicted Tasks section. Selecting the conflicted task does not show any changes.

Qualitia Automation Recorder

• After entering the application URL using the OpenURL button, you cannot hit Enter. You need to click the Arrow button next to it to open the new application URL.

• While recording a new test case, you cannot delete any skipped steps.

SFDC Application Testing

• SFDC objects do not support the following features:

  • Polling Interval and Time Out

  • Wait actions

• The filter options in Chrome Object Spy does not contain the newly introduced SFDC classes.

• After recording a non-label object, the same non-label object step is duplicated when the next step you record is to select multiple items from a pick list. Record again to select multiple items from a pick list and remove the duplicate step.

• The QAS Recorder does not support the recording for the following actions:

  • The VerifyVisibility action for the inputCheckbox component.

  • VerifyChecked and VerifyUncheck actions for checkboxes.

  • All the input components actions that do not generate any event, such as select, inputCheckbox, and inputRadio when you click or hover them.

...

Qualitia Automation Studio 8.2.0 Release Notes

What’s New

Brand new UI!

Isn’t it always a delight to use a product that has been made with care and attention, and with the user at the centre of its existence?

...

• We have created a clean, modern look with upgraded icons, and menus that can be expanded and collapsed.

• The new interface is clutter-free and more intuitive to navigate.

• Keeping the user’s comfort in mind, we have clubbed together the General, Project and Execution Settings to provide a single-screen search experience.

• We have made our test suite execution feature even more robust by giving it a UI boost.

  • Managing execution profiles while executing test suites is now simpler with easy visibility of the chosen settings.

  • You no longer need to remember (or have to dig deeper to figure out) which execution profile fulfills what purpose.

  • You can easily edit execution profiles right from the test suite screen.

Managing Tasks is now even better!

In Qualitia Automation Studio, maintaining each task as an independent reusable component helps saves significant amounts of time and efforts for our users.

...

We remain committed to a process of continuous improvement and look forward to receiving any feedback that you might have for us.

Enhancements

Features Improvements

• The action execution logs now contain additional details to improve the troubleshooting of the test cases executed on desktop web and mobile web environments.

• You can now enable the SmartLocator feature for the mobile web objects also.

• The SmartLocator feature does not change the object properties, such as locator type and locator value, during test case execution. The objects are searched at the run-time and their properties are displayed in the suite execution report.

• You can now enable or disable the Legacy option to view the Qualitia Reports and Dashboard in the old or new format.

QAS Components Installers

• The overall QAS components installer package size has been reduced significantly, which helps you to download the QAS components installers quickly.

• Pre-requisite Checks by QAS Installers

  • The QAS client installer now checks whether compatible versions of Java and .Net Framework are installed on your computer.

  • The Mobile ObjectSpy installer now checks whether compatible versions of Java, .Net Framework, and Android Debug Bridge are installed on your computer.

• You can now repair the Qualitia services that are not working using the QAS Server desktop shortcut.

• Qualitia now provides a list of database privileges for SQL Server and MySQL that are required to install or upgrade the Qualitia Server. Earlier, the database administrator-level privilege was required to install or upgrade the Qualitia Server.

Known Issues

General Issues

• The sorting of test cases in the Scenarios tree is lost when using the Search Test Cases feature.

• You cannot add or edit the properties of a custom action in a single click. You need to click the properties that you want to modify thrice.

• The following issues are seen while using the Search feature in the Environment Variable dialog box:

  • You cannot add a variable or edit a key.

  • If you update any environment variable, change the text in the Search box, and then update another variable, then only the last edited input variable is saved.

• In the Import screen, if you scroll down the tasks inthe New and Conflicted sections, the New and Conflicted labelsare not freezed.

• After skipping a highlighted step and saving the test case, the red underline of that step disappears. However, reverting the changes by unskipping the same step and saving the test case does not fix the problems. If you want the red underline to appear, switch to other tabs, such as tasks or objects within the Development module, and then return to the test case screen.

• If a test case is highlighted with steps, then the test case name that is displayed above the first step of the test case is not highlighted. If you switch to another tab, such as tasks or objects within the Development module, and then return to the test case screen, the test case name in the same is now highlighted.

Desktop Projects

• Updating objects in a TSR file that is used in two or more projects does not reflect the changes correctly in all the desktop projects. When you update an object in the TSR file and synchronize the changes in the first project, the changes to the updated object are displayed correctly. However, when you synchronize the TSR file in the second project, the updated object is displayed as deleted and the same object is added with updated properties in the Object Repository. As a result, in the second project, the deleted objects used in the test cases must be replaced with their corresponding new objects.

Perfecto

• The mobile native and hybrid application file, that is the apk, ipa, and app file, is not uploaded on Perfecto automatically during the Qualitia Automation Studio executions.
  Qualitia recommends that you perform the following steps to upload the native and hybrid mobile application file:

  1. You must upload the mobile native or hybrid applications on Perfecto Cloud before executing test suites.
     To upload a mobile app, login to Perfecto website, click Assets and Setup>Upload.

  2. After uploading the mobile app, copy the Perfecto lab repository path for your mobile app.

  3. Enter the Perfecto lab repository path in the first parameter of the Mobile.OpenApp action.

Qualitia Automation Studio 8.1.0 Release Notes

What’s New

Parallel Execution of Test Cases for a Azure DevOps Pipeline

You can now execute multiple test cases for a Azure DevOps pipeline in parallel. All you need to do is configure multiple Azure DevOps agents with the Qualitia Remote Agent.

Azure DevOps Pipeline Executions in Real Time Reporting

The Real Time Reporting portal now shows the test case executions in real-time for a Azure DevOps pipeline.

Introduction of CompareSubString Action

The CompareSubString action verifies whether a string or any of its substring is defined in the desired pattern that you want. For more information, refer to General Web Actions .

Enhancements

• When a task is removed from the Test Case Editor screen, the selection focus now moves to the previous logical unit (Test Case step, Task, If Block) instead of the first line of the test case.

• Enhancements have been done to improve the error logging.

• QAS now supports MOS and Mobile Recorder for iOS platform version 14.x.

• MOS and Mobile Recorder now support web view on simulator and real device for iOS web and hybrid applications.

• The offline package logging is updated to match the QFD version logging for enabling dependency on specific log formats.

• Updated the PrintMessageInReport action to support backward compatibility for the Qualitia for Desktop v4.3.x projects migrated to QAS 8.x.

Bug Fixes

• Fixed the issues where the applications stopped responding during successive project changes.

• Fixed the authentication issue that were seen while logging into the Reports and Dashboard portal.

• Fixed the issue where an incorrect object class was mapped to a custom action.

• Fixed the issue where the suite execution reports for Azure DevOps pipeline executions did not display the execution start and end time.

• Fixed the issues related to migration of the desktop projects from Qualitia for Desktop v4.3.x to QAS 8.x.

• Fixed the Date-Time formatting issue in the Sync TSR feature and the Sync TSR button visibility.

• Fixed the issue related to incorrect migration of the ComputeExpression action for the desktop projects migrated from Qualitia for Desktop v4.3.x to QAS 8.x.

• Fixed the issues in the reporting of parallel execution of a test suite using Power Shell utility. The Qualitia Parallel Execution Report is now generated if you abort the execution by pressing Ctrl+C from the PowerShell console.

Known Issues

• While upgrading from a previous QAS version, the saved browser binary does not work correctly. This causes the browser to close immediately when you are recording a session.
  To work around this issue, update the browser binary to replace the existing browser binary even if it is the same at the following location:
  %localappdata%QualitiaWDClient/Selenium

• The Excel.WritetoColumn and Excel.WritetoRow general actions are not working correctly.

• During a MOS or Mobile Recorder Session, if you switch from a native-context to the web-context view, the web-view may get distorted for an iOS hybrid application on a real device having iOS version 12.4.5.

• While recording a hybrid application, by default, the Page Refresh option is set to Auto mode by in the web view context.

• The SelectWindowUsingURL action may sometimes fail to execute on Internet Explorer.

• During execution, if you switch from the native-context to theweb-context of the hybrid application, the screenshots for the steps executed on the web-context are not displayedin the Execution Summary Report.
  To work around this issue:

  1. Open the associated execution profile.

  2. Click Edit Desired Capabilities > Android.

  3. Select the nativeWebScreenshot checkbox.

  4. Set nativeWebScreenshot to True.

  5. Click Update.

• In desktop projects, if you add a test data with a double quote, it is replaced with an empty data.

Qualitia Automation Studio 8.0.5 Release Notes

Enhancements

• Selecting an object in the object repository allows you to view the details of the object and also its child objects on the main page.

• Updated the Writelog action for handling the pass message.

• Updated the VerifyExistence action to display the appropriate message in the Info Log details.

Bug Fixes

• Fixed the issues related to editing child objects. Now you can select a child object directly and edit or remove it, without having to first select the parent object.

• Fixed the issues to allow you to edit or remove an object that is selected using the Find option.

• Fixed the issue where after editing any object name, it is reflected in the left pane immediately. Now you are no longer required to switch to other tabs and return to the Objects tab to see the updated object name.

• Fixed the issue where the new properties added to an object were not displayed.

• Fixed the issue with Qualitia executable process, which would remain active in the background even after closing the QAS client.

• Fixed the issues in the Wait actions to enable working in the Explicit wait mode.

• Fixed the issues related to saving test cases when objects are identified using the Google Chrome Object Spy.

Known Issues

Known Issues in Qualitia Automation Web Recorder

• Recording the Enter key as a SendKeySequence Action as is not supported.
  To work around this issue, add a blank step manually in the test case, select the SendKeySequence Action, and type Enter as its parameter value.

• Recording the SendKeySequence Actions using Internet Explorer is not supported. To work around the issue, Press the Tab button of your keyboard, and then record the SendKeySequence Action that you want.

Known Issue in MOS or Mobile Automation Recorder

• Sometimes switching from one tab to another tab in the web-view context for a mobile application on an iOS simulator may fail. To work around this issue, switch to the native-context, activate the tab of the mobile application that you want to open, and then switch to the web-view context to select the tab that you want.

Qualitia Automation Studio 8.0.4 Release Notes

New Features

Introduced the Keep Dry Run Reports option, which does not overwrites the reports of the previous dry runs. For more details, refer to /wiki/spaces/T2/pages/2681539730.

Bug Fixes and Enhancements

Enhancements

• The QAS server upgrade process now handles the Unit Test stubs for the projects integrated with TFS/Azure DevOps. You are no longer required to re-publish the test cases after upgrading the TFS/Azure DevOps integrated projects.

• Significant performance improvements have been made in the following areas:

  • Test case management

  • Object management

  • Project management

  • Local data cache management

  • SaveAs Project feature

• The location of TFS/Azure DevOps Remote Agent working folder has been moved to the localappdata folder to avoid conflicts.

• Cosmetic user interface changes done to improve the user experience.

• Enhancements in the object identification for web elements using Smart locator with text strategy in the following scenarios:

  • Creating objects manually in QAS

  • Adding objects using the the Qualitia Automation Web Recorder

  • Learning objects using Chrome object spy and IE object spy

• Enhancements in the SmartLocator algorithm.

Bug Fixes

• Qualitia Automation Studio now allows you to save test cases with empty test data (cells containing only spaces).

• Fixed the issue related to the data type while passing variables to the Vbscript engine for the test case executions on the Desktop applications.

• Fixed the issue with test case exit flags in a test suite. When you save a test suite, the existing test case exit flags do not reset to Continue (Green flag) anymore.

• Fixed the issues related to the test data of the projects that are migrated from QFD. Now the correct test data is shown for those actions whose parameter sequence has changed.

• Minor fixes related to object identification are done.

Known Issues

• The following error message appears when you open a test case of a project that is migrated from QAS v7.x:
  Object Reference not set to the instance of the Object.
  To work around this issue, after you complete the project migration, delete the DBCache folder, which is located at the following location:
  %localappdata%\Qualitia\WD\Client\Settings\<Project Folder>\DBcache

• The QAS client crashes if it remains idle for more than 12 hours on a virtual machine.

Qualitia Automation Studio 8.0.3 Release Notes

Dropped Feature

Qualitia has dropped MOS and Qualitia Automation Mobile Recorder support for iOS version 10.4 and earlier.

Bug Fixes and Enhancements

• Removed check-in of DBCache and environment variables in Git to avoid conflicts when using Git as the version control system.

• Improved the Object Selection performance in the Test Case Editor screen.

• Fixed the synchronization issues between Qualitia Design Studio and Qualitia Automation Studio.

• Fixed the issue related to publishing custom actions during Azure DevOps integration.

• Fixed the issue where custom action execution in Azure DevOps integration was skipped intermittently.

Known Issues

Known Issues in Settings

• QAS client does not prompt any error message if the Java path is blank in the General Settings screen.

Known Issues in MOS and Qualitia Automation Mobile Recorder

• MOS and Qualitia Automation Mobile Recorder do not support iOS versions 14.x and later.

• Hovering over a web element may fail to highlight the web element if the page contains multiple iframes. In this case, MOS/MR displays the "Failed to execute method" error message.
  To work around this issue, Qualitia recommends to record the web element using the Qualitia Automation Web Recorder for the specific step.

Known Issues in QDS Integrated Project

• If you create a task using steps of a test case in QAS, then QDS does not display the updated test case and the created task.

• Changing the order of tasks in QDS for the test case which has a Test Data in QAS corrupts the test data in QAS. Also, you cannot edit or save the test case in QDS.
  To work around the issue, perform the following steps:

  1. Export the test data of the affected test case. This allows you to use the test data partially again.

  2. Detach all the tasks and remove all the TC steps from the Test Case in QAS.

  3. Import the same tasks in the required order and add the TC steps again at the appropriate places. However, you need to add the test data again using the data from the exported excel sheet appropriately.

Qualitia Automation Studio 8.0.2 Release Notes

New Feature

Introduction of Rest.Patch.Execute.API action.

This PATCH API action updates the partial resources, which can be used as an alternative to the PUT API action. Typically, PATCH API actions are light-weight and consume less bandwidth when compared to the PUT API actions. For more information, refer to Rest.Patch.ExecuteAPI.

Dropped Feature

Mobile Object Spy and Qualitia Automation Mobile Recorder has dropped supporting iOS versions 10.4 and earlier.

Enhancements

• Multiple enhancements are done to the user interface to improve usability.

• Improved the error message that is displayed when you create a project that already exists in the target database server.

• Improved the error message to highlight the set of characters allowed in a project name while creating a project.   

• Enhanced the info logs for wait actions. Info logs now display the actual values used in wait action executions.

• Added support to integrate Azure DevOps Git repository as a version control tool in addition to Bitbucket and GitHub.

• When a user edits a task, other users can now view the following information:

  • The user who edited the task

  • The date and time when the task was edited

  Earlier, only the following message was displayed:

  "Some tasks in the test case have been modified".

• Added support for specifying a relative path to the AttachFile action.

• Added support to update the expired password in the ALM integration settings.

• Added support to update the expired password in the Azure DevOps integration settings.

• Added support to install Qualitia Automation Studio for multiple user profiles on a Virtual Machine even when other users are actively using Qualitia Automation Studio.

Fixed Issues

• Fixed an issue related to the latest setup files for Qualitia Web server setup not getting updated to the latest version during the Server upgrade process.

• Fixed the issue where the IF conditional statements that were migrated from QFD did not work.

Known Issues

Actions

• The WindowsAuthenticationLogin action does not work on Safari.

• The PressKeys action does not execute on the inactive screen of the VM for the following keys and key combinations.

  1. NUMLOCK

  2. CAPSLOCK

  3. SCROLLLOCK

  4. PRTSC

  5. Ctrl+Shift+Tab

  6. Ctrl+N

  7. Alt+F4

  8. Ctrl+Shift+T

  9. Ctrl+W

  10. Ctrl+F4

  11. Ctrl+F5

  12. Alt+Home

  13. Ctrl+

  14. Ctrl-

  15. Ctrl+Shift+Del

  16. Ctrl+J

  17. Ctrl+P

  18. Ctrl+O

  19. Ctrl+U

Defect Management Systems

• The defect management system integration settings are not preserved during migration to 8.0.x. After completing the migration, you must manually re-configure the defect management system integration settings.

• You cannot directly change the settings in the Defect tab of Project Settings if you want to replace the mapping of a Qualitia Project to another Jira/TFS project.
  To replace the mapping for a Qualitia project with another Jira/TFS project, perform the following steps: 

  1. Do one of the following:

     • Go to Admin > Project, under the Configuration column, click Configure next to a project.

     • Go to Settings > Project Settings.

  2. Click the Defects tab.

  3. Select the Target Defect Management System to None.

  4. Click Ok.

You can now integrate the Qualitia project with another Jira/TFS project. For more information, refer to Defect Management Systems .

Mobile Object Spy and Qualitia Mobile Recorder

• When capturing an object on an SMS application, the object name is appended with null.

• Unable to start a session after selecting an application in MOS or Mobile recorder on Xcode version 11.6 or higher. To work around this issue, refer to Unable to Start a Session on Xcode.

• MOS and Qualitia Automation Mobile Recorder do not support iOS versions 14.x and later.

Mobile Object Spy

• Clicking any object field displays the following message unnecessarily:
  ”Object updated successfully”

• For an empty object, if you click its object class, the locator type is automatically selected as ID.
  To work around this issue, from the Locator Type drop-down list, select the desired locator type you want.

• The empty object scenario does not work correctly on iOS.

• No error message is displayed when you click the locator field values for an empty object. However, you can edit the empty object normally by selecting the class, type, and value.

Qualitia Automation Studio 8.0.1 Release Notes

Enhancements

• Qualitia now supports the Windows Authentication Login Action in Firefox browser and Selenium Grid Executions (Chrome and Firefox)

Bug Fixes

• Fixed the minor issues in UI, suite executions, and configuration settings.

• Fixed an issue related to Offline Suite executions.
  An offline suite execution fails if it contained an encrypted password that is defined in the associated Environment Variables.

Known Issues

• The Web Dashboards display the execution results as per the time zone of the QAS server. However, the Realtime Reporting portal displays the execution results as per the local time zone of your computer.
  
  Hence, for the suite executions that occur in a time zone different than QAS server’s time zone, the date and time for the execution results displayed on Real Time Reporting Portal and Web Dashboard might be different.

Qualitia Automation Studio 8.0.0 Release Notes

In this release, we have gone the extra mile to enhance your test automation experience. This new and improved version will help you to build robust tests like never before.

New Execution Engine

• UI for Offline Package: Update Qualitia settings and capabilities which are needed for offline executions. There is no need for a manual update of properties or JSON files.

• Execution Profiles: Create different profiles for a suite that you can execute against them. For example, profiles for cloud execution, local execution, and remote execution.
  For more information, refer to Working with Execution Profiles.

• Stop Execution: Stop execution in between a Dry run or Suite run from QAS itself.

• Support of object data type in StoreHashMap: Store and read any Java object in StoreHashMap in custom actions.

• Failure Classifications: Now provide failure reasoning along with step messages in custom actions.
  Failure classification gives more actionable insights to users to work on.

Qualitia Automation Studio Recorder

Now record operations performed on the application under test and convert them into ready-to-execute automation test cases. Qualitia recorder automates and simplifies the process of creating test cases. This feature allows you to

• Create test cases for Web/Mobile applications, or a combination of both.

• Capture the actions performed on the application as steps and store them as objects, along with the associated actions and parameters.

• Pause recording whenever needed. Start/Resume recording from any step in the test case editor. Use the Test Case Editor to group the steps under separate tasks
  For more information, refer to https://qualitia.atlassian.net/wiki/spaces/QAS83X/pages/3367210334/Recording+a+Test+Case+using+Qualitia+Automation+Studio+Recorder?src=search.

Real Time Reporting

Now get suite execution results in real-time.  The Real-Time Reporting Tool allows you to monitor the test suite executions that are in progress. It updates the results of a test suite execution in real-time as each test case iteration is executed. Using this feature, you can:

...

For more information, refer to Real Time Reporting Portal .

Single Offering for Desktop, Web and Mobile

Now use the same Qualitia version for testing Desktop and Web/Mobile applications.

• Additional features of Web projects will now be available for desktop projects as well·        

• Support for empty objects in the desktop type of projects

• Debugger support for desktop projects

• Error navigation in test case and tasks for empty/deleted objects

Additional Features

• Apply settings for custom actions and version control at a project level. This means that you can create different settings for different projects.

• Create multiple execution profiles and select a particular execution profile during suite execution. An execution profile is a pre-defined set of configuration settings, which can be used to execute test suites. You can add multiple execution profiles with different combinations of configuration settings. Use the new user interface for editing profile settings and desired capabilities.

• Maintain multiple execution profiles for an offline package and edit the profiles using a simple user interface.

• Developing Custom Actions has become more object-oriented as you can access Qualitia Public APIs.

Known Issues

The following are the known issues in Qualitia Automation Studio 8.0.0.

Qualitia Automation Studio

• In Project Save As Feature, the custom action files from the source project are not moved automatically to the target project. After the project is saved, you need to manually move the dependent jars and Custom Action Function codes associated with the custom actions (keywords) that were selected during Save As process.

• When editing a test case, if you make any changes and go to the search box to search a test case without saving the changes, you are prompted to save the changes. If you click Yes, the Scenario tree shows the test case with matching criteria, but the changes are not saved. You must save the changes that you made to a test case before you perform a search on the Scenario tree.

• In a desktop project, if you search for an object that is a part of a long hierarchy in the Objects tree, clicking Next does not scroll up to the highlighted object.

• The Desktop web executions are not tested on Macintosh computers.

• Execution of test case steps on Web and Hybrid Apps using Android emulator takes a longer time.

  To work around this issue, do one of the following:

  • Open the mapped execution profile and disable all the options of Screen Capture On .

  • Open the mapped execution profile, click Mobile > Edit Desired Capabilities, and set nativeWebScreenshot to true.

• The Click action may fail to execute if the Mobile checkbox object is added using the ID locator type. To work around this issue, use XPath locator type for adding the Mobile checkbox objects.

• The Mobile.SelectWebViewUsingURL action may fail on some versions of iOS. During testing, the action failed on Simulator iPhone 8 with PlatformVersion 13.3.

• Qualitia does not support nested environment variables. The test cases that were created using previous QFD versions, having nested environment variables will fail upon execution.

• Qualitia supports only basic data types such as Number and List/Option, for integration with Defect Management Systems (Jira and TFS). Qualitia does not support complex data types such as custom user-defined data types, nested objects, and dates.

• If you switch to another project from the Qualitia client, the current MOS session does not change. To work around this issue, log out from MOS, log in again, and select the correct project.

TFS/Azure DevOps Integration

• The Qualitia Remote Agent resets the execution settings when you upgrade to Qualitia 8.0. In this situation, you must configure the execution settings again.

Qualitia Automation Recorder

Common Issues

• If the XPath locator value for an object contains a Unicode value, it is taken as a blank space while dry run and suite execution. As a result, the execution fails as Qualitia does not identify the object.

  To work around this issue, edit the object using a locator type other than XPath.

• While a recording session is active, if you dry run the test case and then stop it manually, the recording session also stops.

Qualitia Web Recorder

• If you start a recording session and close the browser immediately, the recording session does not stop automatically. Also, you need to close the recorder launching progress bar using Windows Task Manager.

• Before recording the verify and wait actions for a table, you must select the table.

• Qualitia Web Recorder does not support Shadow DOM.

• If you use Internet Explorer for recording, you can record the objects of the Security Certificate dialog box. However, when you dry run the test case, the recorded steps associated with the Security Certificate dialog box fail.

Specific to SFDC Application

• You cannot record the actions on the objects of permission request popups. To work around this issue, you need to manually add the steps with actions such as AcceptDialogand DismissDialog.

• If you select an item from a list, the recorder does not record the SelectItemByText action, but it records a step with the Click action and the selected list item as the object.

Qualitia Mobile Recorder

• You cannot record the objects when launching the application in the Android device, the auto-fill popup appears. The workaround is to disable the auto-fill popup.
  You can disable the appearance of auto-fill popup in the Android 10 device as follows:

  Settings >> Language and Input >> Autofill service >> Click and select option as None     

  For other Android versions, you need to check with the relevant Android Version documentation. 

• Qualitia Mobile Recorder does not support recording web and hybrid applications on an Android emulator that is connected to a Macintosh agent.

• Simulators and real devices having iOS version 13.3 do not support native applications.

• The following iOS platforms do not support recording and Mobile Object Spy for the web applications and web-view context of hybrid applications:

  • All the iOS simulators versions

  • Real devices having iOS version 12.2 or above

• For the projects upgraded from the previous Qualitia versions, if you record a test case, then for every object, multiple pages and objects are created in the object repository.

  To work around this issue, after upgrading the project, change the locator type and value of the Page object to XPath and “//app”.

• Unable to connect to a device intermittently. To work around this issue, restart the recording session.

• While recording a web application, if you update the URL in the address bar, it is not recorded as a step. You need to enter a step manually with action as OpenURL and add the new URL in the parameter.

Reports and Dashboard Portal

• If you have not specified an operating system version in the associated execution profile for suite executions on SauceLabs and BrowserStack, the Real Time Reporting Portal does not display the operating system version for these suite executions.

• If you change the defect management system for a Qualitia project, then the suite execution summary reports that are already open in the browsers show the old defect management system details to log a defect manually.
  In such situations, you can log in to the Real Time Portal or access the Test Suite Execution Summary report from the Suite of Suites screen to log a defect manually using the new Defect Management System.

• For the desktop applications suite executions, the execution time for the first test case iteration does not include the UFT launch time. Hence, for these suite executions, the execution start time shown in the Real Time Reporting Portal and Web Dashboard differ.

• If you are using Firefox to access the Real Time Reporting portal, the white borders in the table grids for the reports are not displayed. This is caused due to a known issue in Firefox.

• For a test case step, you can edit the text under Name/Condition column in the test case editor screen and save the test case. However, after executing the associated test suite, the Suite Execution report screen displays the original test under the Hierarchy column

• The design of Real time Reporting Portal is not mobile responsive. Therefore, you can expect some UI distortions when viewing the portal through the mobile device having a resolution lower than 1100px.

Custom Actions for Desktop Projects

You cannot add or remove parameters from a custom action for a mapped function on Custom Action window. To work around this issue, launch the associated VBS file from Qualitia client, add or remove parameters for the mapped function, and remap the function to the custom action from Custom Action window.