...
...
...
...
...
...
...
...
...
MouseDown
This action simulates left-click at the specified location on the screen.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
X | The x-coordinate of the click. | Yes | String |
Y | The y-coordinate of the click. | Yes | String |
Example:
MouseDown "5" "10"
MouseOver
This action simulates a mouse hovering over the specified object.
This action does not have any parameter.
Example:
MouseOver
MouseUp
This action simulates the event that occurs when the user releases the mouse button.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
X | The x-coordinate of the click. | Yes | String |
Y | The y-coordinate of the click. | Yes | String |
Example
MouseUp "5" "10"
RightClick
This action right-clicks the specified web element.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
option | The context menu option number that needs to be clicked. | Yes | String |
Example:RightClick "3''
This will select the third option from the context-menu.
ScrollIntoView
This action scrolls to view the specified object.
This action does not have any parameter.
Example:
ScrollIntoView
SecureSet
This action enters the expected value into the specified edit box. The value set in the parameter is encrypted once the focus is moved for security purposes.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
Text | Enter the test that needs to be entered in the specified text box in the specified format. | No | String |
Example:
SetSecure "Encrypt(Abc)"When the focus is moved away from the parameter Qualitia will automatically encrypt the data ABC and result in a secured text like "vHpmlfI4R3PQkCN4sZnuqw==þNWE3ZDdkNjE3N2JmNDM2ODgxMzQwYWI1MTA3YWNjMDc="
| Multiexcerpt macro | ||||||
|---|---|---|---|---|---|---|
| ||||||
SendKeySequenceThis action sends one or multiple keys specified in the parameters to the specified object. You may use the syntaxes mentioned below to send normal or modifier keys. Multiple keys should be separated by caret.
|
...
Adding modifiers like SHIFT, Control, and so forth perform the activity of pressing these keys only. For releasing these keys, you must add these modifiers again based on requirements as shown in the example. Example: |
...
SHIFT~} |
...
^w^~{ |
...
SHIFT~}^elcome" The example above will press the word Welcome. |
...
Apart from the normal alphabets, you can also send the modifier keys. When sending modifier keys, you have to send them in the syntax given.
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
Set
This action enters the specified value into the edit box.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
Value | Enter the value that needs to be added into the specified edit box. You can give the alphanumeric value to be entered into the edit box. | Yes | String |
Example: Set "Qualitia"
SetFocus
This action sets the focus on the specified object.
This action does not have any parameter.
Example:
SetFocus
SetValueAttribute
This action sets the data specified in the 'value' attribute of the object.
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
value | Enter the value to be added for the Value attribute. | Yes | String |
Example:
SetValueAttribute "#ff0990"
StoreChildCount
This action stores the child count of the specified object under the specified key. The key value can be retrieved using the key name.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
Key | Enter the key name under which the child count will be saved. | Yes | String |
Example:
StoreChildCount "Key"
StoreCSSProperty
This action stores the CSS property value of the object under the specified key. Key value can be retrieved using the key name.
Input Parameters:
Parameter Name | Parameter |
|---|
...
Description | Mandatory | Data Type | |
|---|---|---|---|
property | Enter the property name whose value you want to store. | Yes | String |
keyProperty | Enter the key name under which the property value will be stored. | Yes | String |
Example:
StoreCSSProperty "display" "Key"
StoreExistence
This action stores existence of the object under the specified key. The key value can be retrieved using the key name.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
Key | Enter the key name under which the existence's Boolean value will be stored.
| Yes | String |
Example:
StoreExistence "Key"
StoreLocation
This action stores the current location of the object under the specified keys. The key values can be retrieved using the key names.
Input Parameters:
Parameter Name | Parameter |
|---|
...
Description | Mandatory | Data Type | |
|---|---|---|---|
keyHeight | Enter the key name to store the height of the location of the object. | Yes | String |
keyWidth | Enter the key name to store the width of the location of the object. | Yes | String |
Example:
StoreLocation "Height" "Width"
StorePropertyValue
This action stores the property of the specified object under the key name. The stored key value can be retrieved using the key name.
Some Android and iOS properties are not accessible.
List of accessible properties for Android: "name", "contentDescription", "className", "resourceId", "text", "enabled", "checkable", "checked", "clickable", "focusable", "focused", "longClickable", "scrollable", "selected", "displayed"
List of accessible properties for iOS: "name", "value", "label", "hint"
Input Parameters:
ParameterName | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
Key | Enter the key name under which the property value will be stored. | Yes | String |
Property | Property/attribute name whose value needs to be stored under the specified key. This can be any accessible property of Android/iOS native object mentioned above. | Yes | String |
Example:
StorePropertyValue "key" "text"
StoreSize
This action stores the size of the specified object under keys. The key values can be retrieved using key names.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
keyXPosition | Enter the key name under which you want to store the height of the object. | Yes | String |
keyYPosition | Enter the key name under which you want to store the width of the object. | Yes | String |
Example:
StoreSize "Height" "Width"
StoreText
This action stores the text entered in an edit box under the specified key. The key value can be retrieved using the key name.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
key | Enter the key under which you want to store the text. | Yes | String |
Example:
StoreText "textKey"
StoreValueAttribute
This action stores the data present in the 'value' attribute of the object.
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
key | Enter the key name under which the value will be stored. Enter the value to be added for the Value attribute.Key value can be retried using the key name. | Yes | String |
Example:
StoreValueAttribute "Key"
VerifyEnability
This action verifies the enability of the specified object.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
enability | Value for this parameters can be true or false.
| Yes | String |
Example:
VerifyEnability "True"
VerifyExistence
This action verifies the existence of the specified object.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
existence | Value for this parameters can be true or false.
| Yes | String |
Example:
VerifyExistence "True"
VerifyVisibility
This action verifies the visibility of the specified object.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
visibility | Value for this parameters can be true or false.
| Yes | String |
Example:
VerifyVisibility "True"
WaitForAttributeContains
This action waits till the value of the specified attribute changes to the expected partial value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
attributeName | Enter the attribute name whose value you want to check. | Yes | String |
attributeValue | Enter the partial expected partial attribute value. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the expected value. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout. | No | String |
keyAttributeValueContains | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForAttributeContains "id" "we323es" "5" "500" "Key" "Defect"
WaitForAttributeNotContains
This action waits until the specified attribute's value of the object changes to other than the partial parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
attributeName | Enter the attribute name whose value you want to check. | Yes | String |
attributeValue | Enter the value which should not be there in the attribute value. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the value to change. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for existence of the unexpected value before exhausting timeout. | No | String |
keyAttributeValue | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForAttributeValueContains "id" "232waf" "5" "500" "Key" "Defect"
WaitForAttributeNotToBe
This action waits until the specified attribute's value of the object changes to other than the exact parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
attributeName | Enter the attribute name whose value you want to check. | Yes | String |
attributeValue | Enter the value which should not be there in the attribute value. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the value to change. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout. | No | String |
keyAttributeValueNotToBe | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForAttributeNotToBe "id" "232waf" "5" "500" "Key" "Defect"
WaitForAttributeNotToBeEmpty
This action waits until the specified attribute's value of the object gets filled with some value. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
attributeName | Enter the attribute name whose value you want to check. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the attribute value. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the attribute value before exhausting timeout. | No | String |
keyAttributeValue | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForAttributeNotToBeEmpty "id" "5" "500" "Key" "Defect"
WaitForAttributeToBe
This action waits till the value of the specified attribute changes to the exact expected value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
attributeName | Enter the attribute name whose value you want to check. | Yes | String |
attributeValue | Enter the exact expected value. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the expected value. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout. | No | String |
keyAttributeValue | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForAttributeToBe "id" "232waf" "5" "500" "Key" "Defect"
WaitForAttributeToBeEmpty
This action waits until the specified attribute's value of the object gets empty. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
attributeName | Enter the attribute name whose value you want to check. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the attribute value to be empty. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the attribute value before exhausting timeout. | No | String |
keyAttributeValue | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForAttributeToBeEmpty "id" "5" "500" "Key" "Defect"
WaitForChildElement
This action waits for the child elements of the specified object to appear. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
childLocatorType | Enter the locator type of the object whose child you want to check. | Yes | String |
childLocatorValue | Enter the locator value of the child you want to check. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the elements to appear. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. | No | String |
keyExistence | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForChildElement "id" "2" "5" "500" "Key" "Defect"
WaitForClickability
This action waits for the specified object to be clickable. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
timeOut | Enter the timeout (in seconds) to wait for the object to be clickable. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the object clickability before exhausting timeout. | No | String |
keyClickability | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForClickability "5" "500" "Key" "Defect"
WaitForExistence
This action waits for the existence of the specified object. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
timeOut | Enter the timeout (in seconds) to wait for the existence of the object. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the existence of the object before exhausting timeout. | No | String |
keyExistence | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForExistence "5" "500" "Key" "Defect"
WaitForInnerTextContains
This action waits for the object to contain the expected partial text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
innerText | Enter the expected text you want to wait for. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the expected text. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. | No | String |
keyInnerTextContains | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForInnerTextContains "Connect" "5" "500" "Key" "Defect"
WaitForInnerTextMatchesPattern
This action waits for inner text from the specified object to match the expected text regular expression pattern. The comparison is case-sensitive. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
innerTextRegXPattern | Enter the expected pattern for the inner text. Pattern should be regular expression. Step fails in case the pattern is invalid. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the expected text. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. | No | String |
keyInnerText | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForInnerTextMatchesPattern ".[My]text." "5" "500" "Key" "Defect"
WaitForInnerTextNotContains
This action waits until the specified attribute's value of the object changes to other than the parameterized value. The comparison is case-sensitive. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
innerText | Enter the text which should not be there in the attribute value. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the inner text to disappear. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the expected text to be disappeared before exhausting timeout. | No | String |
keyInnerTextNotContains | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForInnerTextNotContains "Connect" "5" "500" "Key" "Defect"
WaitForInnerTextNotToBe
This action waits till the inner text of the object changes from the specified text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
innerText | Enter the text which should not be there in the object. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the text to change. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. | No | String |
keyInnerTextNotToBe | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForInnerTextNotToBe "Connect" "5" "500" "Key" "Defect"
WaitForInnerTextToBe
This action waits for the object to contain the expected exact text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
innerText | Enter the expected text you want to wait for. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the expected text. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout. | No | String |
keyInnerText | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForInnerTextToBe "Connect" "5" "500" "Key" "Defect"
WaitForInvisibility
This action waits for the object to invisible. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
timeOut | Enter the timeout (in seconds) to wait for the object to go invisible. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the invisibility before exhausting timeout. | No | String |
keyInvisibility | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForInvisibility "5" "500" "Key" "Defect"
WaitForNonClickability
This object waits for the object to become non clickable. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
timeOut | Enter the timeout (in seconds) to wait for the object to become non clickable. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the clickability before exhausting timeout. | No | String |
keyNonClickability | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForNonClickability "5" "500" "Key" "Defect"
WaitForNonExistence
This action waits for the non existence of the specified object. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
timeOut | Enter the timeout (in seconds) to wait for the non existence of the object. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for non existence of the object before exhausting timeout. | No | String |
keyNonExistence | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForNonExistence "5" "500" "Key" "Defect"
WaitForNumberOfElementsToBe
This action waits for the number of elements of the specified object locator on the page to be same as the expected number. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
number | Enter the expected number of elements to wait for. | Yes | Integer |
timeOut | Enter the timeout (in seconds) to wait for the number elements to appear. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. | No | String |
keyNumberOfElements | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForNumberOfElementsToBe "2" "5" "500" "Key" "Defect"
WaitForNumberOfElementsToBeLessThan
This action waits for the number of elements of the specified object locator on the page to be less than the specified number. You may specify the timeout and polling interval, if required.
...
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
expectedNumOfElements | Enter the expected number of elements to wait for. | Yes | String |
timeOut | Enter the timeout (in seconds) to wait for the number elements to appear. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. | No | Integer |
keyNumOfElementsLessThan | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForNumberOfElementsToBeLessThan "2" "5" "500" "Key" "Defect"
WaitForNumberOfElementsToBeMoreThan
This action waits for the number of elements of the specified object locator on the page to be more than the specified number. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
expectedNumOfElements | Enter the expected number of elements to wait for. | Yes | Integer |
timeOut | Enter the timeout (in seconds) to wait for the number elements to appear. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout. | No | String |
keyNumOfElementsLessThan | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForNumberOfElementsToBeMoreThan "2" "5" "500" "Key" "Defect"
WaitForStaleness
This action waits until the element gets detached from the DOM.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
timeOut | Enter the timeout (in seconds) to wait for the value to be detached. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for existence of the element before exhausting timeout. | No | String |
keyStatus | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForStaleness "5" "500" "Key" "Defect"
WaitForVisibility
This action waits for the object to be visible. You may specify the timeout and polling interval, if required.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
timeOut | Enter the timeout (in seconds) to wait for the object visibility. | No | String |
pollingInterval | Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout. | No | String |
keyVisibility | Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect. | No | String |
statusIfConditionNotSatisfied | Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect. | No | String |
Example:
WaitForVisibility "5" "500" "Key" "Defect"
...
ClickAndWait (Deprecated)
This action clicks the specified object and waits for the seconds specified in Sync Time under the Configuration Settings (Execution) window.
Default value is 20 seconds. If the page loads before reaching the maximum sync time execution continues to the next steps.
This action does not have any parameter.
Example:
ClickAndWait
Webdriver waits for the document to come in ready state. If it is in ready state it is assumed that the page is loaded completely and Webdriver stops waiting. The condition to wait till the document to load in ready state and assume that the page is loaded could however not work as expected at all times.
WaitForObject (Deprecated)
This action waits for the object to appear or disappear for the maximum number of seconds specified.
If the object is found or not found before the maximum time specified, execution continues to the next steps.
If the wait time is "" then the wait time shall be the "Sync Time" set under the Configuration Settings (Execution) window.
Input Parameters:
Parameter Name | Parameter Description | Mandatory | Data Type |
|---|---|---|---|
waitTime | Enter the number of seconds to wait for the object to appear or disappear. This has to be 0 or any positive number. | Yes | String |
existence | Value for this parameter can be true or false.
| Yes | String |
Example:
WaitForObject "10" "
...
True"
The action waits for maximum 10 seconds for the object to appear. If the object appears before 10 seconds elapses, execution continues to the next steps.
WaitForObject "15" "False"
The action shall wait for maximum 15 seconds for the object to disappear. If the object disappears before 15 seconds elapses,execution continues to the next steps.