OpenURL

This action opens the specified URL in the browser selected under Configuration Settings.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
url	Enter the URL that you want to open.	Yes	String

Example:

OpenUrl "http://www.google.com/"

NavigateForward

This action navigates the browser to the next page.

This action does not have any parameter.

Example:

NavigateForward

NavigateBack

This action navigates the browser to the previous page.

This action does not have any parameter.

Example:

NavigateBack

StorePageURL

This action stores the URL of the web page under the specified key. The stored value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
key	Enter the key name to store URL.	Yes	String

Example:

StorePageURL "Key"

StorePageTitle

This action stores the web page title under the specified key. The stored value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
key	Enter the key name to store page title.	Yes	String

Example:

StorePageTitle "Key"

StoreVariable

This action stores a particular string value under the specified key. This value then can be used when developing test cases.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
key	Enter the key name to store variable.	Yes	String
data	Enter the value to be stored under the key name.	Yes	String

Example:

StoreVariable "url" "http://www.bing.com/"

SecureStoreVariable

This action stores the specified value securely by encrypting it under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
key	The variable under which the string data is to be stored.	Yes	String
data	Enter the data to be stored in encrypted mode.	Yes	String

Example:

SecureStoreVariable "Password" "Encrypt(Abc)"

When the focus is moved away from the data ABC, Qualitia will automatically encrypt the text to "vHpmlfI4R3PQJskt3nuqw==þNWE3ZDdkNjE3N2JmNDM2ODgxMzQwYWI1MTA3YWNjMDc="

Suppose the user want to open the Find dialog on the Browser window under test. Manually this is done by pressing the keys Control and F simultaneously. This opens the Find dialog on the browser window. The same thing can be done using the action PressKeys .The data to be passed to the action in this case will be given as ~^F where ^ means Control. (See the list below for the keys and their meaning.

The action will return 0, if the key is pressed successfully else it will return 1 in any other case.

Important Note:

Ideally the data to be passed here is only ^F, however as ^ has a special meaning in Qualitia it has to be preceded with an escape sequence ~. Hence the data passed will be ~^F.

Make sure to prefix an escape sequence which is a tilda for the following characters which has a special meaning in Qualitia. The characters are {,}, ^, ~

Ex:

If key to be sent is {F1} then user should pass data as ~{F1~}

 To send {TAB} then user should pass data as ~{TAB~}

 To send {ENTER} then user should pass data as ~{ENTER~}

Use the PressKeys method to send keystrokes to applications that have no automation interface. Most keyboard characters are represented by a single keystroke. Some keyboard characters are made up of combinations of keystrokes (CTRL+SHIFT+HOME, for example). To send a single keyboard character, send the character itself as the string argument. For example, to send the letter x, send the string argument "x".
You can use PressKeys to send more than one keystroke at a time. To do this, create a compound string argument that represents a sequence of keystrokes by appending each keystroke in the sequence to the one before it. For example, to send the keystrokes a, b, and c, you would send the string argument "abc". The PressKeys method uses some characters as modifiers of characters (instead of using their face-values). This set of special characters consists of parentheses, brackets, braces, and the:

plus sign "+",
caret "^", (Use with escape character (~))
percent sign "%",
and tilde "~"

Send these characters by enclosing them within braces "{}". For example, to send the plus sign, send the string argument "{+}". Brackets "[ ]" have no special meaning when used with PressKeys, but you must enclose them within braces to accommodate applications that do give them a special meaning (for dynamic data exchange (DDE) for example).

To send bracket characters, send the string argument "{[}" for the left bracket and "{]}" for the right one.
To send brace characters, send the string argument "}" for the left brace and "{" for the right one.

Some keystrokes do not generate characters (such as ENTER and TAB). Some keystrokes represent actions (such as BACKSPACE and BREAK). To send these kinds of keystrokes, send the arguments shown in the following table:

Key	Argument
BACKSPACE	~{BACKSPACE~}, ~{BS~}, or ~{BKSP~}
BREAK	~{BREAK~}
CAPS LOCK	~{CAPSLOCK~}
DEL or DELETE	~{DELETE} or ~{DEL~}
DOWN ARROW	~{DOWN~}
END	~{END~}
ENTER	~{ENTER~} or ~
ESC	~{ESC~}
HELP	~{HELP~}
HOME	~{HOME~}
INS or INSERT	~{INSERT~} or ~{INS~}
LEFT ARROW	~{LEFT~}
NUM LOCK	~{NUMLOCK~}
PAGE DOWN	~{PGDN~}
PAGE UP	~{PGUP~}
PRINT SCREEN	~{PRTSC~}
RIGHT ARROW	~{RIGHT~}
SCROLL LOCK	~{SCROLLLOCK~}
TAB	~{TAB~}
UP ARROW	~{UP~}
F1	~{F1~}
F2	~{F2~}
F3	~{F3~}
F4	~{F4~}
F5	~{F5~}
F6	~{F6~}
F7	~{F7~}
F8	~{F8~}
F9	~{F9~}
F10	~{F10~}
F11	~{F11~}
F12	~{F12~}
F13	~{F13~}
F14	~{F14~}
F15	~{F15~}
F16	~{F16~}

To send keyboard characters that are comprised of a regular keystroke in combination with a SHIFT, CTRL, or ALT, create a compound string argument that represents the keystroke combination. You do this by preceding the regular keystroke with one or more of the following special characters:
Key Special Character
SHIFT +
CTRL ^ ^ (Use with escape character (~))
ALT %
Note: When used this way, these special characters are not enclosed within a set of braces.
To specify that a combination of SHIFT, CTRL, and ALT should be held down while several other keys are pressed, create a compound string argument with the modified keystrokes enclosed in parentheses. For example, to send the keystroke combination that specifies that the SHIFT key is held down while:

e and c are pressed, send the string argument "+(ec)".
e is pressed, followed by a lone c (with no SHIFT), send the string argument "+ec".
If you want to send a key combination that includes Ctrl key, send it like this: to send Ctrl + N send "~^n".

You can use the PressKeys method to send a pattern of keystrokes that consists of a single keystroke pressed several times in a row. To do this, create a compound string argument that specifies the keystroke you want to repeat, followed by the number of times you want it repeated. You do this using a compound string argument of the form {keystroke number}. For example, to send the letter "x" ten times, you would send the string argument "{x 10}". Be sure to include a space between keystroke and number.

The only keystroke pattern you can send is the kind that is comprised of a single keystroke pressed several times. For example, you can send "x" ten times, but you cannot do the same for "Ctrl+x".
You cannot send the PRINT SCREEN key ~{PRTSC~} to an application.
To send a space, send the string " ".

Multiexcerpt macro

name	StoreSubString

StoreSubString

This action stores a substring of a string into a variable. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strKey	The variable in which the sub-string is to be stored.	Yes	String
strMainString	Enter the string whose sub-string value is to be stored.	Yes	String
intStart	Enter the index of the string from where the sub-string is to be fetched.	Yes	String
intLength	The number of characters required in the string.	Yes	String

Example:
StoreSubString "resultSubString" "This is a test" "2" "4"

Multiexcerpt macro

name	StoreStringLength

StoreStringLength

This action increments the string length by the value specified by the user and stores it into a variable.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strKey	The variable in which the length of the string is to be stored	Yes	String
strMainString	The string whose length is to be stored	Yes	String
intIncrement	The value by which the length needs to be incremented	Yes	String

Example:
StoreStringLength "length" "This is a test" "3"

Multiexcerpt macro

name	CompareString

CompareString

This action compares two strings. The comparison can be either case-sensitive / non case-sensitive. Even a key can be passed as one of the parameters for comparison where the CompareString function will retrieve the value from the key and that value will be compared with expected.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

firstString

Enter the 1st string value that you want to compare. You can pass the key name here enclosed in braces.

Yes

String

mainString

Enter the 2nd string value that you want to compare. You can pass the key name here enclosed in braces.

Yes

String

caseSensitive

Specify the kind of comparison; case-sensitive or case-insensitive.

Set True for case-sensitive comparison.
Set False for case-insensitive comparison.

Yes

String

Example:
StoreVariable "Cancel" "key"

CompareString "{key}" "Cancel" "true"

Here the CompareString action shall retrieve the value for the key (here Cancel) and compare it with the expected (here Cancel) with case sensitive comparison as True. The action will return 0, if the strings match else it will return 2 if the strings do not match. It will return 1 in any other case (like an error).

The action can also compare strings having a new line character.
The spaces of both the strings are trimmed before comparing.

Multiexcerpt macro

name	VerifyStringContainsValue

VerifyStringContainsValue

This action verifies that the substring is present within the main string. Comparison can either be case sensitive or insensitive.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

MainString

Enter the main string in which you want to search substring. You can pass the key name here enclosed in braces.

Yes

String

Substring

Enter the 2nd string value that you want to search. You can pass the key name here enclosed in braces.

Yes

String

caseSensitive

Specify the kind of comparison; case-sensitive or case-insensitive.

Set True for case-sensitive comparison.
Set False for case-insensitive comparison.

Yes

String

Example:
StoreVariable "Testing the action" "mainStrKey"

VerifyStringContainsValue "{mainStrKey}" "the action" "True"

Here the VerifyStringContainsValue action shall retrieve the value for the key mainStrKey and compare it with the expected with case sensitive comparison as True.

The action will return 0, if the sub-string is found in the main string, else it will return 2 if the sub-string is not found in the main string. In any other case it will return 1.

Empty and null sub-strings will not be verified by this action.

Multiexcerpt macro

name	ComparePattern

ComparePattern

This action compares the data passed by user and verifies that it matches the pattern specified by the user.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Pattern

Enter the pattern against which the data specified by the user will be verified.

Yes

String

Data

Enter the data which will be matched against the pattern specified by the user.

Yes

String

caseSensitive

Specify the kind of comparison; case-sensitive or case-insensitive.

Set True for case-sensitive comparison.
Set False for case-insensitive comparison.

Yes

String

Example:
Consider a bank application where on adding a user an account number is generated which is unique and consists of alphanumeric characters. The number of characters in that account number is 10 where the first 5 are alphabets and remaining five are numbers.

Suppose the account number is YuIFp96062. If this has to be verified for the pattern mentioned, we can use the action ComparePattern as follows:

strPattern - /^[a-z]/{5/}[0-9]/{5/}$
strData – YuIFp96062
blnCase - False

ComparePattern "/^[a-z]/{5/}[0-9]/{5/}$" "YuIFp96062" "false"

Here the ComparePattern action shall verify that data mentioned matched the specified pattern .The action will return 0, if the data matches the specified pattern , else it will return 2 if the data does not match the pattern. In any other case it will return 1.

If the pattern is using Qualitia's special characters like {,},/,^ then they should be prefixed with /.

Special characters and sequences are used in writing patterns for regular expressions. For a complete list of the regular expression syntax visit the VBScript syntax Guide for Regular Expressions.

Multiexcerpt macro

name	VerifyDifference

VerifyDifference

This action verifies the difference between two integer values and stores it in a variablevalidates it with the expected difference value.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Int1	Enter the 1st numerical value to compare. You can pass the key name here enclosed in braces.	Yes	String
Int2	Enter the 2nd numerical value to compare. You can pass the key name here enclosed in braces.	Yes	String
difference	Enter the expected difference between the two numbers.	Yes	String

Example:
VerifyDifference "30" "40" "10"

multiexcerpt-include-macro

name	StoreSplitString

StoreSplitString

page	QASWM7:General Web Actions

MaximizeBrowser

This action

splits the string based on the specified delimiter and stores a particular instance from the splits into a variable.

Input Parameters:

maximizes the browser.

This action does not have any parameter.

Example:

MaximizeBrowser

Enter the string which you want to split

Multiexcerpt macro

name	SelectFrame

SelectFrame

This action selects a frame within the current window.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type

strKey

locator

Enter the

key name under which instance of the split string will to be stored.

Yes

String

mainString

locator using which you want to select the frame. This parameter can have the values of the frame's: ID, Name, Xpath, CSS.

Yes

String

Delimiter

locatorType

Enter

the delimiter

which locator type you want to use

for splitting.

Yes

String

instance

The instance of the split string that is required

. It can be ID, Name, xpath, CSS and so on. In order to come out of all the frames, the parameters passed should be empty.

Yes

String

Example:

StoreSplitString SelectFrame "SplitKey" "This,is, a, testmainFrame" "," "3"

MaximizeBrowser

This action maximizes the browser.

This action does not have any parameter.

Example:

MaximizeBrowser

name"

Enter which locator type you want to use. It can be ID, Name, xpath, CSS and so on. In order to come out of all the frames, the parameters passed should be empty

Multiexcerpt macro

name	SelectFrameStoreCurrentDateInFormat

SelectFrameStoreCurrentDateInFormat

This action selects a frame within the current window.stores the current date in the specified format under the key name. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type

locator

Format

Enter the

locator using

format which you want to

select the frame. This parameter can have the values of the frame's: ID, Name, Xpath, CSS.

Yes

String

locatorType

use to save the date. Use DD for day, MM for month and YYYY for year. For example: dd/MM/yyyy , MMM/dd/yyyy , dd-MM-yyyy. dd = day MM = month represented as 01,02,03 etc MMM = month represented as Jan. Feb, Mar etc yyyy = year	Yes	String
key	Enter the key name under which you want to store the current date.	Yes	String

Example:
SelectFrame StoreCurrentDateInFormat "mainFrameMM-dd-yyyy" "namecurrentDateKey"

Multiexcerpt macro

name	StoreCurrentDateInFormat

StoreCurrentDateInFormat

StoreDateInFormat

This action stores the

current

date

in the specified

provided by the user in a specific format under the key

name

. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type

Format

date	The date which needs to be stored in the specified format.	Yes	String
Format	Enter the format using which you want to

use to

save the date.

Use

Use DD for day, MM for month and YYYY for year.

For example: dd/MM/yyyy , MMM/dd/yyyy , dd-MM-yyyy, and so on.

dd = day MM = month represented as 01,02,03 etc MMM = month represented as Jan. Feb, Mar etc yyyy = year	Yes	String
resultFormat	Format in which the date given by the user needs to be stored.	Yes	String
key	Enter the key name under which

you want to store the current date

the new result will be stored.

Yes

String

Example:

StoreCurrentDateInFormat

StoreDateInFormat "30/Jan/2009"

"

MM-

dd

-

/MMM/yyyy" "dd-MMM-yyyy" "

currentDateKey

Datekey"

StoreDateInFormat

VerifyDates

This action stores the date provided by the user in a specific format under the key. The key value can be retrieved using the key name.performs comparisons between two dates for various operations (equality, inequality, greater than, less than).

Input Parameters:

StoreDateInFormat

Parameter Name	Parameter Description	Mandatory	Data Type
datestartDate	The Enter the start date which needs to be stored in the specified formatverified.	Yes	String
startformat	Enter the format of the start given date.	Yes	String
FormatendDate	Enter the format using which you want to save the date. Use DD for day, MM for month and YYYY for year. For example: dd/MM/yyyy , MMM/dd/yyyy , dd-MM-yyyy, and so on. dd = day MM = month represented as 01,02,03 etc MMM = month represented as Jan. Feb, Mar etc yyyy = year	Yes	String
resultFormat	Format in which the date given by the user needs to be stored.	Yes	String
key	Enter the key name under which the new result will be stored.	Yes	String

Example:

end date which needs to be compared with the start date.

Yes

String

endFormat

Enter the format of the end given date.

Yes

String

operation

Specify the operation to be performed between the first and second dates.

Use < to verify that the first date is less than (comes before) the second date.
Use > to verify that the first date is greater than (comes after) the second date.
Use == to verify that the dates are equal.
Use != to verify that the dates are unequal.

Yes

String

Example:

The result of this action shall be true or false depending on the operation performed.

VerifyDates "30/Jan/200912-Jun-2008" "dd/-MMM/-yyyy" "dd-MMM- "04/12/2008" "dd/MM/yyyy" "Datekey<"

VerifyDates

This action performs comparisons between two dates for various operations (equality, inequality, greater than, less than).

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

startDate

Enter the start date which needs to be verified.

Yes

String

startformat

Enter the format of the start given date.

Yes

String

endDate

Enter the end date which needs to be compared with the start date

Multiexcerpt include macro

name	DateTimeFormatSupported
page	QASFWM:General Web Actions

ChangeDateAndStore

This action modifies the day/month/year by the number specified by the user and stores the resulting date under the specified key in the same format as the input date. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
date	Enter the date that needs to be updated.	Yes	String
endFormatformat	Enter the format of the end date given dateby the user.	Yes	String
operationdayValue Specify the operation to be performed between the first and second dates. Use < to verify that the first date is less than (comes before) the second date. Use > to verify that the first date is greater than (comes after) the second date. Use == to verify that the dates are equal. Use != to verify that the dates are unequal	Enter the value by which you want to increase/decrease the day. For example; "1", "-3".	Yes	String
monthValue	Enter the value by which you want to increase/decrease the month. For example; "1", "-3".	Yes	String

Example:

The result of this action shall be true or false depending on the operation performed.

VerifyDates

yearValue	Enter the value by which you want to increase/decrease the year. For example; "1", "-3".	Yes	String
key	Enter the key name under which the updated date will be stored.	Yes	String

Example:
To change date from 1^st jan 2007 to 15 feb 2007 user can use 2 ways

Increment only the day value
dayValue = 45, monthValue = 0 , yearValue = 0
E.g.- ChangeDateAndStore

"

12

01-

Jun

01-

2008

2007"

"dd-

MMM

MM-yyyy" "45" "

04/12/2008

0" "0" "key"

dd/MM/

Increment the complete date
dayValue = 14, monthValue = 1 , yearValue = 0
E.g.- ChangeDateAndStore "01-01-2007" "dd-MM-yyyy" "

<"

ChangeDateAndStore

This action modifies the day/month/year by the number specified by the user and stores the resulting date under the specified key in the same format as the input date

14" "1" "0" "key"

Hence the user can either give the exact end date or can give the no of days, months or years by which the date needs to be changed.

CalculateDifferenceInDatesAndStore

This action calculates the difference in days between the two specified dates and stores the difference under the specified key. The key value can be retrieved used using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
datestartDate	Enter the start date that needs to be updatedcompare.	Yes	String
formatstartformat	Enter the date format of the start date given by the user.	Yes	String
dayValueendDate	Enter the value by which you want to increase/decrease the day. For example; "1", "-3"end date to compare.	Yes	String
monthValueendFormat	Enter the value by which you want to increase/decrease the month. For example; "1", "-3".date format of the end date.	Yes	String
yearValue	Enter the value by which you want to increase/decrease the year. For example; "1", "-3".	Yes	String
key	Enter the key name under which the updated date the difference (in days) will be stored.	Yes	String

Example:
To change date from 1^st jan 2007 to 15 feb 2007 user can use 2 ways

Increment only the day value
dayValue = 45, monthValue = 0 , yearValue = 0
E.g.- ChangeDateAndStore

CalculateDifferenceInDatesAndStore

"

01

24-

01

Jan-2007" "dd-

MM

MMM-yyyy" "

45

01/26/2007"

"0"

"MM/dd/yyyy

"0"

"

key

diffKey"

Increment the complete date
dayValue = 14, monthValue = 1 , yearValue = 0
E.g.- ChangeDateAndStore "01-01-2007"

VerifyDialogExistence

This action verifies if any dialog of the type alert/prompt/confirmation exists on the browser.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

existence

Value of this parameter can be true or false.

Set True if you want to check for the presence.
Set False if you want to check for the absence.

Yes

String

Example:
VerifyDialogExistence "

dd-MM-yyyy" "14" "1" "0" "key"

Hence the user can either give the exact end date or can give the no of days, months or years by which the date needs to be changed.

CalculateDifferenceInDatesAndStore

This action calculates the difference in days between the two specified dates and stores the difference under the specified key. The key value can be used using the key name.

Input Parameters:

Parameter Name

Parameter

True"

AnswerForNextDialog

This action sets the input as the answer for the next prompt. After setting the answer, webdriver by default may cancel the prompt.

In order to accept and submit your input in the prompt, this action should be used followed by the action "AcceptDialog".

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
startDateanswer	Enter the start date to compareinput which you want to set in the next prompt.	Yes	String
startformat	Enter the date format of the start date.	Yes	String
endDate	Enter the end date to compare.	Yes	String
endFormat	Enter the date format of the end date.	Yes	String
key	Enter the key name under which the difference (in days) will be stored.	Yes	String

Example:
CalculateDifferenceInDatesAndStore "24-Jan-2007" "dd-MMM-yyyy" "01/26/2007" "MM/dd/yyyy "diffKey"

VerifyDialogExistence

This action verifies if any dialog of the type alert/prompt/confirmation exists on the browser

Example:

AnswerForNextDialog "Hello"

Multiexcerpt macro

name	AcceptDialog

AcceptDialog

This action clicks the OK button on the alert/prompt/confirmation pop up.

This action does not have any parameter.

Example:
AcceptDialog

Multiexcerpt macro

name	DismissDialog

DismissDialog

This action cancels the alert/prompt/confirmation pop up.

This action does not have any parameter.

Example:
DismissDialog

Set True if

Multiexcerpt macro

name	StoreDialogText

StoreDialogText

This action stores the message from the alert/prompt/confirmation pop up under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type

existence

Value of this parameter can be true or false.

key	Enter the key name under which you want to

check for

save the

presence

message.

Set False if you want to check for the absence.

Yes

String

Example:

VerifyDialogExistence

StoreDialogText

"True"AnswerForNextDialog

"message"

Multiexcerpt macro

name	ExecuteFile

ExecuteFile

This action

sets the input as the answer for the next prompt. After setting the answer, webdriver by default may cancel the prompt.In order to accept and submit your input in the prompt, this action should be used followed by the action "AcceptDialog"

executes the batch file specified by the user.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type

answer

Enter the input which you want to set in the next prompt

batchFile

The absolute path to the batch file to be executed. Path should not have whitespace.

Yes

String

Example:

AnswerForNextDialog

ExecuteFile "

Hello

C:\test\batchfile1.bat"

Multiexcerpt macro

name	AcceptDialogAttachFile

AcceptDialogAttachFile

This action clicks the OK button on the alert/prompt/confirmation pop up.

This action does not have any parameter.

Example:
AcceptDialog

Multiexcerpt macro

name	DismissDialog

DismissDialog

This action cancels the alert/prompt/confirmation pop up.

This action does not have any parameter.

Example:
DismissDialog

Enter the key name under which you want to save the message.

sets a file path in the file object type in html. This action is applicable only for desktop web application.

Input Parameters:

Multiexcerpt macro

name	StoreDialogText

StoreDialogText

This action stores the message from the alert/prompt/confirmation pop up under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

key

Parameter Name	Parameter Description	Mandatory	Data Type
fileInputlocator	Enter the locator of the input box where the file is to be selected.	Yes	String
locatorType	Enter the type of locator used for the locator of the file input object. This could be Id, xpath, name, CSS.	Yes	String
filePath	Enter the absolute path of the file.	Yes	String

Example:
StoreDialogText AttachFile "message"

Multiexcerpt macro

name	ExecuteFile

ExecuteFile

This action executes the batch file specified by the user.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

batchFile

The absolute path to the batch file to be executed. Path should not have whitespace.

Yes

String

Example:
ExecuteFile "C:\test\batchfile1.bat"

Multiexcerpt macro

name	AttachFile

AttachFile

This action sets a file path in the file object type in html. This action is applicable only for desktop web application.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

fileInputlocator

Enter the locator of the input box where the file is to be selected.

Yes

String

locatorType

Enter the type of locator used for the locator of the file input object.
This could be Id, xpath, name, CSS.

Yes

String

filePath

Enter the absolute path of the file.

Yes

String

Example:
AttachFile "fileBox" "id" "c:/Folder/test.txt"

ExecuteQueryAndStoreInFile

This action executes data manipulation queries like select and stores the result into a file.

The file types supported are xml, xmls and txt. The valid extensions are

For text file - .txt
For xml file- .xml
For excel file- .xls

The databases tested are my sql 5.1, Oracle 10g,MS Access, SQL Server 2008

"fileBox" "id" "c:/Folder/test.txt"

ExecuteQueryAndStoreInFile

This action executes data manipulation queries like select and stores the result into a file.

The file types supported are xml, xmls and txt. The valid extensions are

For text file - .txt
For xml file- .xml
For excel file- .xls

The databases tested are my sql 5.1, Oracle 10g,MS Access, SQL Server 2008.

Connection to different databases
1. Mysql:
a. Driver - "com.mysql.jdbc.Driver"
b. Connection url - jdbc:mysql://localhost:portNo/databasename?useUnicode=true&characterEncoding=utf8"
i. Databasename -is the mysql database to which the user wishes to connect

2. Oracle:
a. Driver - "oracle.jdbc.driver.OracleDriver" (case-sensitive)
b. Connection url - "jdbc:oracle:thin:@servername or ip:portNo:Databasename"
i. Servername -is the name of the server .If the server is on local system, the server name is localhost. If the server is on remote system, the ip address of the remote server can be used.
ii. portNo – is the port which shall listen the database connections. The default port for oracle is 1521. If the user has configured a specific port for listening, then that port number should be used here.
iii. Databasename is the oracle database to which the user wishes to connect

3. SQLServer:
a. Driver - "com.microsoft.sqlserver.jdbc.SQLServerDriver"
b. Connection url - "jdbc:sqlserver://servername/ip:port;database=databasename;"
i. Servername -is the name of the server .If the server is on local system, the server name is localhost. If the server is on remote system, the ip address of the remote server can be used.
ii. portNo – is the port which shall listen the database connections. The default port for oracle is 1433. If the user has configured a specific port for listening, then that port number should be used here.
iii. Databasename is the sql server database to which the user wishes to connect

4. MSAccess using dsn:
a. Driver - "sun.jdbc.odbc.JdbcOdbcDriver"
b. Connection url - "jdbc:odbc:dsn_name
i. dsn_name -is the name of the dsn configured on the system . If multiple users are accessing the same dsn, then it needs to be configured on a shared path instead of local system path.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Driver	Enter the driver for the database.	Yes	String
url	Enter the connection string to connect to the database.	Yes	String
username	Enter the user name to connect to the database.	Yes	String
Password	Enter the password to connect to the database.	Yes	String
Query	Enter the ddl query that needs to be executed.	Yes	String
File	Enter the absolute path of the file in which the results of the database query need to be stored.	Yes	String

Example
ExecuteQueryAndStoreInFile "oracle.jdbc.driver.OracleDriver" "jdbc:oracle:thin:@localhost:1521:orcl" "scott" "tiger" "select * from test_table where id = 100" "C:\DBResults\XML\ORACLE\Result.xml"

ExecutQueryAndStoreInKey

This action executes data definitions queries like update, delete and stores the result into a key.

Connection to different databases
1. Mysql:
a. Driver - "com.mysql.jdbc.Driver"
b. Connection url - jdbc jdbc:mysql://localhost:portNo/databasename?useUnicode=true&characterEncoding=utf8"
i. Databasename -is the mysql database to which the user wishes to connect

2. Oracle:
a. Driver - "oracle.jdbc.driver.OracleDriver" (case-sensitive)
b. Connection url - "jdbc:oracle:thin:@servername or ip:portNo:Databasename"
i. Servername -is the name of the server .If the server is on local system, the server name is localhost. If the server is on remote system, the ip address of the remote server can be used.
ii. portNo – is the port which shall listen the database connections. The default port for oracle is 1521. If the user has configured a specific port for listening, then that port number should be used here.
iii. Databasename is the oracle database to which the user wishes to connect

3. SQLServer:
a. Driver - "com.microsoft.sqlserver.jdbc.SQLServerDriver"
b. Connection url - "jdbc:sqlserver://servername/ip:port;database=databasename;"
i. Servername -is the name of the server .If the server is on local system, the server name is localhost. If the server is on remote system, the ip address of the remote server can be used.
ii. portNo – is the port which shall listen the database connections. The default port for oracle is 1433. If the user has configured a specific port for listening, then that port number should be used here.
iii. Databasename is the sql server database to which the user wishes to connect

4. MSAccess using dsn:
a. Driver - "sun.jdbc.odbc.JdbcOdbcDriver"
b. Connection url - "jdbc:odbc:dsn_name
i. dsn_name -is the name of the dsn configured on the system . If multiple users are accessing the same dsn, then it needs to be configured on a shared path instead of local system path.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Driver	Enter the driver for the database.	Yes	String
url	Enter the connection string to connect to the database.	Yes	String
username	Enter the user name to connect to the database.	Yes	String
Password	Enter the password to connect to the database.	Yes	String
Query	Enter the ddl dml query that needs to be executed.	Yes	String
Filekey	Enter the absolute path of the file key in which the results result of the database query need to be stored.	Yes	String

Example:
ExecuteQueryAndStoreInFile ExecuteQueryAndStoreInKey "oracle.jdbc.driver.OracleDriver" "jdbc:oracle:thin:@localhost:1521:orcl" "scott" "tiger" "select * delete from test_table where id = 100" "C:\DBResults\XML\ORACLE\Result.xmlResultkey"

CompareTabularResults

This action compares the database results in two files and displays only the difference in an Microsoft or a kingsoft Excel sheet. A link is generated in the log file. On clicking the link, the excel sheet opens in which the difference in the data is displayed. This action compares the following file types which contain DB results. These files contain the results after executing the queries using the actions "ExecuteQueryAndStoreInFile" or "StoreTableData". The supported file extension types are : txt, xml and xls.

text and text
text and excel
text and xml
xml and xml
xml and excel
excel and excel

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
firstFile	The complete location of the first file to be compared	Yes	String
secondFile	The complete location of the second file to be compared	Yes	String
resultFileType	The file type in which the difference between the two results need to be displayed. The file type supported is: MSExcel	No	String

Example
CompareTabularResults "C:\DBResults\XML\ORACLE\Result.xml" "C:\DBResults\Excel\ORACLE\Result.xls" "MSExcel"

ComputeExpression

This action evaluates mathematical, relational, logical operations and stores the result under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
expression	The expression to be evaluated	Yes	String
strKey	The key under which the result of the evaluation will be stored.	Yes	String

Example:

Mathematical Expression
ComputeExpression "24*2+4" "Result"

Example:

Relational Expression
ComputeExpression "10*2<30" "Result"

Example:

Logical Expression
ComputeExpression "10*2+1>19&10*2+2<23'" "Result"

CompareArray

This action compares two arrays for equality.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

firstArray

The first array whose items are separate by carat (^) operator.

No

Array

secondArray

The second array whose items are separate by carat (^) operator.

No

Array

match

This parameter specifies the type of comparison to be done. It can be one of the following:

Exact – This will compare the items of the array for exact match that is size of the two arrays should match. The sequence in which the items occur in the arrays should match. This is a one to one comparison.
Partial- This compares if the second array is a sub-list of the first. The sub-list items in the second array need not be in the same sequence as they appear in the first array. However, it is not vice versa, that is, it will not check if the first array is a sub-list of the seconds array. In this case, the action will fail.

No

String

Example :
CompareArray "1^2^3^4" "1^2^3^4" "exact"
CompareArray "1^2^3^4^5^6" "2^1^3^4" "partial"

StoreWindowHandle

This action fetches the handle (identifier) of a window and stores under the specified key. This key can the be used in action like SelectPage and ClosePopupBrowser to work on the specific page. This action can be used when the name of the window on which user needs to work on is not known.

Also, this action will have to be used immediately after every action which results in opening a new window. Only then user will be able to work on the new opened window. Thus, immediately after every action which opens a new window, this action will have to be used in order to fetch the identifier of the new window.

This action has to be used for every window of the application. For more information about this, please refer to the knowledge base here.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strKey	The key on which the handle of the window need to be stored	Yes	String

Example :
Object1 Click
StoreWindowHandles "new window"
SelectPage "{new window}"
EditObjectOnNewPage Set Testing
In the example above, on clicking on object1 a new window is opened on which actions need to be performed.

Use the action StoreWindowHandles to fetch the handle of the new window opened. Use the SelectPage action to select the window. Then user can work on an object present on the new page.

Also, when the action OpenUrl is used, user will have to store the handle on this main application window.

Example:

OpenUrl "http://www.google.com"
StoreWindowHandle "mainapplicationWindow"

ExitTask

This action skips the execution of the next step and continue executing the next task.

This action is not available for test case level step.

This action does not have any parameter.

Example:

ExitTask

ExitTCIteration

This action skips the execution of the current iteration of test case and execute next iteration. In case of a single TC Iteration the test case execution will stop.

This action does not have any parameter.

Example:

ExitTCIteration

ExitSuite

This action stops the execution of the test suite and no further test cases will be executed.

This action does not have any parameter.

Example:

ExitSuite

VerifyLinkOnPage

This action verifies if there is any hyperlink exists on the page.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Link	The locator of the link to be verified. This is the inner text of the link.	Yes	String

Example:
VerifyLinkOnPage "AdvancedSearch""AdvancedSearch"

Multiexcerpt macro

name	DragandDroptoObject

DragAndDropToObject

This action drags the specified object and drops it in the position of another specified object.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
dragLocator	Enter the locator value of an element to be dragged.	Yes	String
dragLocatorType	Enter the locator type of the element to be dragged.	Yes	String
dropToLocator	Enter the locator of an element whose location (i.e., whose centre-most pixel) will be the point where dragLocator is dropped.	Yes	String
dropToLocatorType	Enter the locator type of the element where the element will be dragged.	Yes	String

Example:
DragAndDropToObject "//div/img[@alt='abx']" "xpath" "abc" "id"

Multiexcerpt macro

name	WindowsAuthenticationLogin

WindowsAuthenticationLogin

This action helps users to login into the application using the basic Windows authentication window. This action It is supported on Internet Explorer and on Internet Explorer, Google Chrome, and Mozilla Firefox browsers and on desktop web Web only.

Selenium does not support

such window by default.This action use AutoIT to interact with the authentication windows. It Mandatory to install AutoIT to run this action.

operations on such windows out-of-the-box when the browser is set to Internet Explorer. In order to achieve this condition on Internet Explorer browser, you must first install AutoIT to interact using Windows authentication.

All the actions dependent on AutoIT are sensitive to the object focus.

Install AutoIT from the location http://www.autoitscript.com/site/autoit/downloads/

Click Download AutoIt v3.
Choose full installation Full Installation.
After the set up setup is completed, set the AutoIT installation path should be set against the Qualitia's configfile key "AutoITPath"folder path in Qualitia Configuration Settings.
1. Log on to Qualitia Automation Studio.
2. On the File menu, click Setting > Configuration Setting > Dependency.
3. In AutoITInstall Path, select the AutoIT installation folder path.
  For example:C:\Program Files\Auto IT or C:\Program Files(x86)\Auto IT
4. Click OK.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
url	Enter the URL to the web application.	Yes	String
Username	Enter the username to sign in.	Yes	String
Password	Enter the password to sign in.	Yes	String

Example:

WindowsAuthenticationLogin "http://www.abc.com" "testuser1" "passwduser1"

This action is tested on IE9 and FF23IE 11, Chrome 71, and Firefox 63.

Multiexcerpt macro

name	StoreChildCount

StoreChildCount

This action stores the child count for the specified locator. The action counts the last element in the Xpath which are placed inside the parent hierarchy. The child elements to be counted can be immediate children/descendants. The user should pass relevant Xpath to achieve children/descendants count.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

locator

The xpath of the object whose child count is to be retrieved.

It is mandatory that the input should be an xpath locator. This action will fail for any other locator type.

Yes

String

key

Enter the key name under which the count will be stored.

Yes

String

Example
StoreChildCount "//table[@id='12']/tbody/tr/td/div" "Key"

Multiexcerpt macro

name	DownloadFile

DownloadFile

This action clicks the link/element which will populate a download window, and then downloads the file.

The action supports and is explicitly tested for FF3, IE7, IE8. The action will not wait till the file is downloaded, this has to be handled externally by the user.

This action requires AutoIt to be installed.

Install AutoIT from the location http://www.autoitscript.com/site/autoit/downloads/
Click on Download AutoIt v3.
Choose full installation.
After the set up is completed, AutoIT installation path should be set against the Qualitia's configfile key "AutoITPath"

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
folderName	The path where the file is to be download. Please check Table 1 "Parameter Mandate" to validate in the situation where this parameter will be mandatory. In case the parameter Mandatory; the user should take care that the folder path exists. The action does not validates whether the folder exist	Yes	String
Filename	The filename of the downloadable file, to be given incase the user requires to give specific name and not depend on the default name of the file. In case, the file already exist, similar window like below will appear. Such windows are not handled by the action. Incase, the user does not provide this data, the action will pick the default file name available while download.	No	String

Example
DownloadFile "C:/ProgramData" "Qualitia"
This action is tested on IE8, FF & chrome. This action is not supported on IE9, IE10, and Google Chrome <16.

WaitForPageToLoad

This actions waits for the page to load for the specified number of seconds. If the wait time is "" then the wait time value is taken from the "Sync Time" set under the Qualitia Configuration (Execution) window.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
waitTime	Enter the number of seconds to wait.	Yes	String

Example:
WaitForPageToLoad "10"

In Webdriver, we wait for the object to come in ready state. If it is in ready state it is assumed that the page is loaded completely and Webdriver will stop waiting. The condition to wait till the object is in ready state and assume that the page is loaded could however not work as expected at all times.

RefreshPage

This action simulates the refresh operation on the currently selected page.

This action does not have any parameter.

Example:

RefreshPage

DeleteCookiesOnCurrentDomain

This action deletes all the cookies that are visible to the current domain.

This action does not have any parameter.

If the page is www.google.co.in and the user runs the above action, then all the cookies created by www.google.co.in will be deleted.

If there is a link in www.google.co.in and on clicking, it navigates to www.apple.com.

Again , when the user runs the above action, then all the cookies create by www.apple.com will be deleted.

Reiterating, to delete www.google.co.in cookies, the application needs to be in www.google.co.in domain.

This action will automatically, pick up the current domain and will delete cookies of that domain. The user just needs to make sure that he runs this action only in the domain for which the cookies are to be deleted.

Note: In HTML, due to security reasons, the only website that can read/delete a cookie is the one that creates it.

Example:
DeleteCookiesOnCurrentDomain

AcceptDialogAndStoreMessage

This action accepts the dialog appeared on the Web page and stores the message under the specified key.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Key	Enter the key in which the message will be stored.	Yes	String

Example:
AcceptDialogAndStoreMessage "AlertMessage"

WriteToBuildProperty

This action writes a user defined property along with its value to qer.properties file. This customized information can be used in email notifications sent by Jenkins provided all the required email specific settings are done there in Jenkins.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
propertyName	Property name to be written in qer.properties file	Yes	String
propertyValue	Property value to be written in qer.properties file	Yes	String

Example:
WriteToBuildProperty "propertyName" "propertyValue"

NoOps

This is a placeholder action and cannot be executed. Qualitia selects this action for the steps present under the activity when auto-populating test case.

You are requested to replace this action with Qualitia executable action.

This action does not have any parameter.

When executing test cases with this action, test cases will be failed to notify Qualitia users about replacing such actions.

Page Comparison

Versions Compared

Old Version 15

New Version Current

Key

OpenURL

NavigateForward

NavigateBack

StorePageURL

StorePageTitle

StoreVariable

SecureStoreVariable

On this page:

Sleep

SelectPage

ClosePopUpBrowser

PressKeys

StoreSubString

StoreStringLength

CompareString

VerifyStringContainsValue

ComparePattern

VerifyDifference

MaximizeBrowser

SelectFrame

MaximizeBrowser

SelectFrameStoreCurrentDateInFormat

StoreCurrentDateInFormat

StoreDateInFormat

VerifyDates

VerifyDates

ChangeDateAndStore

ChangeDateAndStore

CalculateDifferenceInDatesAndStore

VerifyDialogExistence

CalculateDifferenceInDatesAndStore

AnswerForNextDialog

VerifyDialogExistence

AcceptDialog

DismissDialog

StoreDialogText

ExecuteFile

AcceptDialogAttachFile

DismissDialog

StoreDialogText

ExecuteFile

AttachFile

ExecuteQueryAndStoreInFile

ExecuteQueryAndStoreInFile

ExecutQueryAndStoreInKey

CompareTabularResults

ComputeExpression

CompareArray

StoreWindowHandle

ExitTask

ExitTCIteration

ExitSuite

VerifyLinkOnPage

DragAndDropToObject

WindowsAuthenticationLogin

StoreChildCount

DownloadFile

WaitForPageToLoad

RefreshPage

DeleteCookiesOnCurrentDomain

AcceptDialogAndStoreMessage

WriteToBuildProperty

NoOps