...

Multiexcerpt include macro

name	Click
page	WebButton Actions

Multiexcerpt include macro

name	VerifyExistence
page	WebButton Actions

Multiexcerpt include macro

name	VerifyVisibility
page	WebButton Actions

Multiexcerpt include macro

name	StorePropertyValue
page	WebButton Actions

Multiexcerpt include macro

name	SetFocus
page	WebButton Actions

New Actions

Multiexcerpt macro

name	StoreText

StoreText

This action stores the text existing inside the specified object under the specified keys. The key values can be retrieved using the key names.

Input Parameters:

Parameter Name	Parameter Desciption	Mandatory	Data Type
keyText	Enter the key name to store the text from the specified object.	Yes	String

Example:

StoreText "Key"

Multiexcerpt macro

name	StoreLocation

StoreLocation

This action stores the current location of the object under the specified keys. The key values can be retrieved using the key names.

Input Parameters:

Parameter Name	Parameter Desciption	Mandatory	Data Type
keyHeight	Enter the key name to store the height of the location of the object.	Yes	String
keyWidth	Enter the key name to store the width of the location of the object.	Yes	String

Example:

StoreLocation "Height" "Width"

Multiexcerpt macro

name	StoreCSSProperty

StoreCSSProperty

This action stores the CSS property value of the object under the specified key. Key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Desciption	Mandatory	Data Type
property	Enter the property name whose value you want to store.	Yes	String
keyProperty	Enter the key name under which the property value will be stored.	Yes	String

Example:

StoreCSSProperty "display" "Key"

Multiexcerpt macro

name	StoreSize

StoreSize

This action stores the size of the specified object under keys. The key values can be retrieved using key names.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
keyXPosition	Enter the key name under which you want to store the height of the object.	Yes	String
keyYPosition	Enter the key name under which you want to store the width of the object.	Yes	String

Example:

StoreSize "Height" "Width"

Multiexcerpt macro

name	SendKeys

SendKeySequence

This action sends one or multiple keys specified in the parameters to the specified object. You may use the syntaxes mentioned below to send normal or modifier keys. Multiple keys should be separated by caret.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
arrayofKeys	Enter the keys you want to send. Multiple keys should be separated by caret (^).	Yes	Array

Adding modifiers like SHIFT, Control, and so forth perform the activity of pressing these keys only. For releasing these keys, you must add these modifiers again based on requirements as shown in the example.

Example:

sendKeySequence "~{SHIFT~}^w^~{SHIFT~}^elcome"

The example above will press the word Welcome.

Apart from the normal alphabets, you can also send the modifier keys. When sending modifier keys, you have to send them in the syntax given.

Key	Syntax
NULL	~{NULL~}
CANCEL (Esc)	~{CANCEL~}
HELP	~{HELP~}
BACK_SPACE	~{BACK_SPACE~}
TAB	~{TAB~}
CLEAR	~{CLEAR~}
RETURN	~{RETURN~}
ENTER	~{ENTER~}
SHIFT	~{SHIFT~}
LEFT_SHIFT(SHIFT)	~{LEFT_SHIFT~}
CONTROL	~{CONTROL~}
LEFT_CONTROL(CONTROL)	~{LEFT_CONTROL~}
ALT	~{ALT~}
LEFT_ALT	~{LEFT_ALT~}
PAUSE	~{PAUSE~}
ESCAPE	~{ESCAPE~}
SPACE	~{SPACE~}
PAGE_UP	~{PAGE_UP~}
PAGE_DOWN	~{PAGE_DOWN~}
END	~{END~}
HOME	~{HOME~}
LEFT	~{LEFT~}
ARROW_LEFT	~{ARROW_LEFT~}
UP	~{UP~}
ARROW_UP	~{ARROW_UP~}
RIGHT	~{RIGHT~}
ARROW_RIGHT	~{ARROW_RIGHT~}
DOWN	~{DOWN~}
ARROW_DOWN	~{ARROW_DOWN~}
INSERT	~{INSERT~}
DELETE	~{DELETE~}
SEMICOLON	~{SEMICOLON~}
EQUALS	~{EQUALS~}
NUMPAD0	~{NUMPAD0~}
NUMPAD1	~{NUMPAD1~}
NUMPAD2	~{NUMPAD2~}
NUMPAD3	~{NUMPAD3~}
NUMPAD4	~{NUMPAD4~}
NUMPAD5	~{NUMPAD5~}
NUMPAD6	~{NUMPAD6~}
NUMPAD7	~{NUMPAD7~}
NUMPAD8	~{NUMPAD8~}
NUMPAD9	~{NUMPAD9~}
MULTIPLY	~{MULTIPLY~}
ADD	~{ADD~}
SEPARATOR	~{SEPARATOR~}
SUBTRACT	~{SUNSTRACT~}
DECIMAL	~{DECIMAL~}
DIVIDE	~{DIVIDE~}
F1	~{F1~}
F2	~{F2~}
F3	~{F3~}
F4	~{F4~}
F5	~{F5~}
F6	~{F6~}
F7	~{F7~}
F8	~{F8~}
F9	~{F9~}
F10	~{F10~}
F11	~{F11~}
F12	~{F12~}
META	~{META~}
COMMAND (META)	~{COMMAND~}
ZENKAKU_HANKAKU	~{ZENKAKU_HANKAKU~}
CLICK	~{CLICK~}
DOUBLECLICK	~{DOUBLECLICK~}
RIGHTCLICK	~{CONTEXTCLICK~}

Multiexcerpt macro

name	setValueAttribute

SetValueAttribute

This action sets the data specified in the 'value' attribute of the object.

Parameter Name	Parameter Description	Mandatory	Data Type
value	Enter the value to be added for the Value attribute.	Yes	String

Example:

SetValueAttribute "#ff0990"

Multiexcerpt macro

name	StoreValueAttribute

StoreValueAttribute

This action stores the data present in the 'value' attribute of the object.

Parameter Name	Parameter Description	Mandatory	Data Type
key	Enter the key name under which the value will be stored. Enter the value to be added for the Value attribute.Key value can be retried using the key name.	Yes	String

Example:

StoreValueAttribute "Key"

Multiexcerpt macro

name	WaitForStaleness

WaitForStaleness

This action waits until the element gets detached from the DOM.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
timeOut	Enter the timeout (in seconds) to wait for the value to be detached.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the element before exhausting timeout.	No	String
keyStatus	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForStaleness "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForAttributeContains

WaitForAttributeContains

This action waits till the value of the specified attribute changes to the expected partial value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
attributeName	Enter the attribute name whose value you want to check.	Yes	String
attributeValue	Enter the partial expected partial attribute value.	Yes	String
timeOut	Enter the timeout (in seconds) to wait for the expected value.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout.	No	String
keyAttributeValueContains	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForAttributeContains "id" "we323es" "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForAttributeNotContains

WaitForAttributeNotContains

This action waits until the specified attribute's value of the object changes to other than the partial parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
attributeName	Enter the attribute name whose value you want to check.	Yes	String
attributeValue	Enter the value which should not be there in the attribute value.	Yes	String
timeOut	Enter the timeout (in seconds) to wait for the value to change.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the unexpected value before exhausting timeout.	No	String
keyAttributeValue	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForAttributeValueContains "id" "232waf" "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForAttributeToBe

WaitForAttributeToBe

This action waits till the value of the specified attribute changes to the exact expected value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
attributeName	Enter the attribute name whose value you want to check.	Yes	String
attributeValue	Enter the exact expected value.	Yes	String
timeOut	Enter the timeout (in seconds) to wait for the expected value.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout.	No	String
keyAttributeValue	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForAttributeToBe "id" "232waf" "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForAttributeNotToBe

WaitForAttributeNotToBe

This action waits until the specified attribute's value of the object changes to other than the exact parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
attributeName	Enter the attribute name whose value you want to check.	Yes	String
attributeValue	Enter the value which should not be there in the attribute value.	Yes	String
timeOut	Enter the timeout (in seconds) to wait for the value to change.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout.	No	String
keyAttributeValueNotToBe	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with Defect.	No	value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForAttributeNotToBe "id" "232waf" "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForAttributeNotToBeEmpty

WaitForAttributeNotToBeEmpty

This action waits until the specified attribute's value of the object gets filled with some value. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
attributeName	Enter the attribute name whose value you want to check.	Yes	String
timeOut	Enter the timeout (in seconds) to wait for the attribute value.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the attribute value before exhausting timeout.	No	String
keyAttributeValue	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForAttributeNotToBeEmpty "id" "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForAttributeToBeEmpty

WaitForAttributeToBeEmpty

This action waits until the specified attribute's value of the object gets empty. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
attributeName	Enter the attribute name whose value you want to check.	Yes	String
timeOut	Enter the timeout (in seconds) to wait for the attribute value to be empty.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the attribute value before exhausting timeout.	No	String
keyAttributeValue	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForAttributeToBeEmpty "id" "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForClickability

WaitForClickability

This action waits for the specified object to be clickable. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
timeOut	Enter the timeout (in seconds) to wait for the object to be clickable.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the object clickability before exhausting timeout.	No	String
keyClickability	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForClickability "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForExistence

WaitForExistence

This action waits for the existence of the specified object. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
timeOut	Enter the timeout (in seconds) to wait for the existence of the object.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the existence of the object before exhausting timeout.	No	String
keyExistence	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForExistence "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForInnerTextContains

WaitForInnerTextContains

This action waits for the object to contain the expected partial text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
innerText	Enter the expected text you want to wait for.	Yes	String
timeOut	Enter the timeout (in seconds) to wait for the expected text.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout.	No	String
keyInnerTextContains	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForInnerTextContains "Connect" "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForInnerTextMatchesPattern

WaitForInnerTextMatchesPattern

This action waits for inner text from the specified object to match the expected text regular expression pattern. The comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
innerTextRegXPattern	Enter the expected pattern for the inner text. Pattern should be regular expression. Step fails in case the pattern is invalid.	Yes	String
timeOut	Enter the timeout (in seconds) to wait for the expected text.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout.	No	String
keyInnerText	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForInnerTextMatchesPattern ".*[My]text.*" "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForInnerTextNotContains

WaitForInnerTextNotContains

This action waits until the specified attribute's value of the object changes to other than the parameterized value. The comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
innerText	Enter the text which should not be there in the attribute value.	Yes	String
timeOut	Enter the timeout (in seconds) to wait for the inner text to disappear.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the expected text to be disappeared before exhausting timeout.	No	String
keyInnerTextNotContains	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForInnerTextNotContains "Connect" "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForInnerTextNotToBe

WaitForInnerTextNotToBe

This action waits till the inner text of the object changes from the specified text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
innerText	Enter the text which should not be there in the object.	Yes	String
timeOut	Enter the timeout (in seconds) to wait for the text to change.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout.	No	String
keyInnerTextNotToBe	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForInnerTextNotToBe "Connect" "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForInnerTextToBe

WaitForInnerTextToBe

This action waits for the object to contain the expected exact text. The comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
innerText	Enter the expected text you want to wait for.	Yes	String
timeOut	Enter the timeout (in seconds) to wait for the expected text.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the expected text before exhausting timeout.	No	String
keyInnerText	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForInnerTextToBe "Connect" "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForInvisibility

WaitForInvisibility

This action waits for the object to invisible. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
timeOut	Enter the timeout (in seconds) to wait for the object to go invisible.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the invisibility before exhausting timeout.	No	String
keyInvisibility	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForInvisibility "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForNonClickability

WaitForNonClickability

This object waits for the object to become non clickable. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
timeOut	Enter the timeout (in seconds) to wait for the object to become non clickable.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the clickability before exhausting timeout.	No	String
keyNonClickability	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForNonClickability "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForNonExistence

WaitForNonExistence

This action waits for the non existence of the specified object. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
timeOut	Enter the timeout (in seconds) to wait for the non existence of the object.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for non existence of the object before exhausting timeout.	No	String
keyNonExistence	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForNonExistence "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForVisibility

WaitForVisibility

This action waits for the object to be visible. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
timeOut	Enter the timeout (in seconds) to wait for the object visibility.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the object visibility before exhausting timeout.	No	String
keyVisibility	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForVisibility "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForNumberOfElementsToBe

WaitForNumberOfElementsToBe

This action waits for the number of elements of the specified object locator on the page to be same as the expected number. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
number	Enter the expected number of elements to wait for.	Yes	Integer
timeOut	Enter the timeout (in seconds) to wait for the number elements to appear.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout.	No	String
keyNumberOfElements	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForNumberOfElementsToBe "2" "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForNumberOfElementsToBeLessThan

WaitForNumberOfElementsToBeLessThan

This action waits for the number of elements of the specified object locator on the page to be less than the specified number. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
expectedNumOfElements	Enter the expected number of elements to wait for.	Yes	String
timeOut	Enter the timeout (in seconds) to wait for the number elements to appear.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout.	No	Integer
keyNumOfElementsLessThan	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForNumberOfElementsToBeLessThan "2" "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForNumberOfElementsToBeMoreThan

WaitForNumberOfElementsToBeMoreThan

This action waits for the number of elements of the specified object locator on the page to be more than the specified number. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
expectedNumOfElements	Enter the expected number of elements to wait for.	Yes	Integer
timeOut	Enter the timeout (in seconds) to wait for the number elements to appear.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout.	No	String
keyNumOfElementsLessThan	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForNumberOfElementsToBeMoreThan "2" "5" "500" "Key" "Defect"

Multiexcerpt macro

name	WaitForChildElement

WaitForChildElement

This action waits for the child elements of the specified object to appear. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
childLocatorType	Enter the locator type of the object whose child you want to check.	Yes	String
childLocatorValue	Enter the locator value of the child you want to check.	Yes	String
timeOut	Enter the timeout (in seconds) to wait for the elements to appear.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for the objects before exhausting timeout.	No	String
keyExistence	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. Default value is Fail. You can override this with value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForChildElement "id" "2" "5" "500" "Key" "Defect"

Versions Compared

Old Version 50

New Version 51

Key

On this page:

DoubleClick

RightClick

New Actions

StoreText

StoreLocation

StoreCSSProperty

StoreSize

SendKeySequence

SetValueAttribute

StoreValueAttribute

WaitForStaleness

WaitForAttributeContains

WaitForAttributeNotContains

WaitForAttributeToBe

WaitForAttributeNotToBe

WaitForAttributeNotToBeEmpty

WaitForAttributeToBeEmpty

WaitForClickability

WaitForExistence

WaitForInnerTextContains

WaitForInnerTextMatchesPattern

WaitForInnerTextNotContains

WaitForInnerTextNotToBe

WaitForInnerTextToBe

WaitForInvisibility

WaitForNonClickability

WaitForNonExistence

WaitForVisibility

WaitForNumberOfElementsToBe

WaitForNumberOfElementsToBeLessThan

WaitForNumberOfElementsToBeMoreThan

WaitForChildElement

Page Comparison

Versions Compared

Old Version 50

New Version 51

Key

On this page:

DoubleClick

RightClick

New Actions

StoreText

StoreLocation

StoreCSSProperty

StoreSize

SendKeySequence

SetValueAttribute

StoreValueAttribute

WaitForStaleness

WaitForAttributeContains

WaitForAttributeNotContains

WaitForAttributeToBe

WaitForAttributeNotToBe

WaitForAttributeNotToBeEmpty

WaitForAttributeToBeEmpty

WaitForClickability

WaitForExistence

WaitForInnerTextContains

WaitForInnerTextMatchesPattern

WaitForInnerTextNotContains

WaitForInnerTextNotToBe

WaitForInnerTextToBe

WaitForInvisibility

WaitForNonClickability

WaitForNonExistence

WaitForVisibility

WaitForNumberOfElementsToBe

WaitForNumberOfElementsToBeLessThan

WaitForNumberOfElementsToBeMoreThan

WaitForChildElement