Page Comparison

...

The action returns 0, if the key is pressed successfully else it will return 1 in any other case.

Note: If a PressKeys action does not execute on an Inactive Screen, refer to PressKeys Action does not Execute on an Inactive Screen.

...

The data to be passed here is only ^F. However ^ has a special meaning in QAS, it must be preceded with an escape sequence ~. Hence the data passed is written as ~^F.
Make sure to prefix an escape sequence which is a tilda for the following characters which has a special meaning in Qualitia. The characters are {,}, ^, ~
Example:

Code Block
If key to be sent is {F1}, enter data as ~{F1~}.

Code Block
To send {TAB}, enter data as ~{TAB~}.

Code Block
To send {ENTER}, enter data as ~{ENTER~}.

Use the PressKeys action to send keystrokes to applications that have no automation interface. Most keyboard characters are represented by a single keystroke. Some keyboard characters are made up of combinations of keystrokes (CTRL+SHIFT+HOME, for example). To send a single keyboard character, send the character itself as the string argument. For example, to send the letter x, send the string argument "x".

You can use PressKeys to send more than one keystroke at a time. To do this, create a compound string argument that represents a sequence of keystrokes by appending each keystroke in the sequence to the one before it. For example, to send the keystrokes a, b, and c, you need to send as "abc". The PressKeys method uses some characters as modifiers of characters (instead of using their face-values). This set of special characters consists of parentheses, brackets, braces, and the:

plus sign "~{+~}",
caret "^", (use with an escape character [~])
percent sign "%"
tilde "~"

...

Info
You can create your own combinations and formats using the patterns mentioned here. These patterns mentioned herein are case-sensitive such as entering as dd-mm-yyyy instead of dd-MM-yyyy will result in wrong output. Ensure that you use them in a correct way in order to achieve the desired output.

...

Here the CompareString action shall retrieve the value for the key (here Cancel) and compare it with the expected (here Cancel) with case sensitive comparison as True. The action will return 0, if the strings match else it will return 2 if the strings do not match. It will return 1 in any other case (like an error).

PrintMessageinReport

This action helps you to print the desired message in Qualitia test case execution report.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

message

Enter the desired message you want to print into the Qualitia test case execution report.

Yes

String

status

Values for this parameter can be Pass, Fail, Passed, Failed, Defect, and NotExecuted.

Note: The value is not case-sensitive.

No

String

...

Example:
To change date from 1^st jan 2007 to 15 feb 2007 user can use 2 ways

Increment only the day value
dayValue = 45, monthValue = 0 , yearValue = 0
E.g.- ChangeDateAndStore "01-01-2007" "dd-MM-yyyy" "45" "0" "0" "key"
Increment the complete date
dayValue = 14, monthValue = 1 , yearValue = 0
E.g.- ChangeDateAndStore "01-01-2007" "dd/MM/yyyy" "14" "1" "0" "key"

Hence the user can either give the exact end date or can give the no of days, months or years by which the date needs to be changed.

...

Parameter Name	Parameter Description	Mandatory	Data Type
fileInputlocator	Enter the locator of the input box where the file is to be selected.	Yes	String
locatorType	Enter the type of locator used for the locator of the file input object. This could be Id, xpath, name, CSS.	Yes	String
filePath	Enter the absolute or relative path of the file.	Yes	String

Example:

AttachFile "fileBox" "id" "c:/Folder/test.txt"

...

The file types supported are xml, xls, and txt. The valid extensions are

For text file - .txt
For xml file- .xml
For excel file- .xls

The Qualitia supports querying on the following database types:

...

Perform the following steps:

From the Qualitia client, select the associated project.
Click Settings > Project Configuration > Manage Dependent jar.
Enter the location of DB jar.
Click OK.

Connection to different databases
1. Mysql:
a. Driver - "com.mysql.jdbc.Driver"
b. Connection url - jdbc:mysql://localhost:portNo/databasename?useUnicode=True&characterEncoding=utf8"
i. Databasename -is the mysql database to which the user wishes to connect

2. Oracle:
a. Driver - "oracle.jdbc.driver.OracleDriver"
b. Connection url - "jdbc:oracle:thin:@servername or ip:portNo:Databasename"
i. Servername -is the name of the server .If the server is on local system, the server name is localhost. If the server is on remote system, the ip address of the remote server can be used.
ii. portNo – is the port which shall listen the database connections. The default port for oracle is 1521. If the user has configured a specific port for listening, then that port number should be used here.
iii. Databasename is the oracle database to which the user wishes to connect

3. SQLServer:
a. Driver - "com.microsoft.sqlserver.jdbc.SQLServerDriver"
b. Connection url - "jdbc:sqlserver://servername/ip:port;database=databasename;"
i. Servername -is the name of the server .If the server is on local system, the server name is localhost. If the server is on remote system, the ip address of the remote server can be used.
ii. portNo – is the port which shall listen the database connections. The default port for oracle is 1433. If the user has configured a specific port for listening, then that port number should be used here.
iii. Databasename is the sql server database to which the user wishes to connect

4. MSAccess using dsn:
a. Driver - "sun.jdbc.odbc.JdbcOdbcDriver"
b. Connection url - "jdbc:odbc:dsn_name
i. dsn_name -is the name of the dsn configured on the system . If multiple users are accessing the same dsn, then it needs to be configured on a shared path instead of local system path.

...

This action compares the database results in two files and displays only the difference in an Microsoft or a kingsoft Excel sheet. A link is generated in the log file. On clicking the link, the excel sheet opens in which the difference in the data is displayed. This action compares the following file types which contain DB results. These files contain the results after executing the queries using the actions "ExecuteQueryAndStoreInFile" or "StoreTableData". The supported file extension types are : txt, xml and xls.

text and text
text and excel
text and xml
xml and xml
xml and excel
excel and excel

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
sourceFile	Enter the source file to be used for the comparison.	Yes	String
targetFile	Enter the target file against which you want to compare the source file.	Yes	String
resultFileType	The file type in which the difference between the two results need to be displayed. The file type supported is: MSExcel	No	String

...

Parameter Name	Parameter Description	Mandatory	Data Type
folderPath	The path where the file is to be download. Please check Table 1 "Parameter Mandate" to validate in the situation where this parameter will be mandatory. In case the parameter Mandatory; the user should take care that the folder path exists. The action does not validate whether the folder exist	Yes	String
Filename	The filename of the downloadable file, to be given in case the user requires to give a specific name and not depend on the default name of the file. In case, the file already exists, similar window like below will appear. Such windows are not handled by the action. In case, the user does not provide this data, the action will pick the default file name available while downloading.	No	String
locator	Enter the locator value.	Yes	String
locatorType	Enter which locator type you want to use. It can be ID, Name, xpath, CSS and so on.	Yes	String

Example:

...

Example DownloadFile "C:/ProgramData" "Qualitia" "DOWNLOAD SAMPLE DOC FILE" "Link"

...

ValidateStringSyntaxinFile "C:\Users\Qualitia\Cust_Details.json"

End of the execution, if the data from the specified file is valid, action will pass, else action will fail.

UpdateValueFromJson

This action reads a JSON file and updates the JSON key value as per the specified parameters and data type.

...

StorePageSource "PageSource"

StoreWindowHandleAtIndex

This action fetches the handle (identifier) of the specified window in the index and stores under the specified key. This key can the be used in action like SelectPage and ClosePopupBrowser to work on the specific page. This action can be used when the name of the window on which user needs to work on is not known.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strKey	Enter the key name to store the window handle.	Yes	String
index	Enter the index of the page whose handle you want to store.	Yes	String

Example :

StoreWindowHandleAtIndex "Key" "4"

SwitchWebExecutionPlatform

...

WaitForNumberofWindowsToBe

This action waits until the number of open windows reaches the count specified in the parameter. You may use polling interval and timeout, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
expectedNumber	Enter expected number of windows.	No	String
timeOut	Enter the timeout (in seconds) to wait.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check whether the specified count has reached.	No	String
keyNumOfWindows	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForNumberOfWindowsToBe "3" "10" "500" "Key" "Defect"

...

StoreWindowSize "Height" "Width"

SetWindowPosition

This action sets the position of the console window as per the specified position.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
xPosition	Enter the x coordinate of the position to set.	Yes	String
yPosition	Enter the y coordinate of the position to set.	Yes	String

...

This action runs the parameterized JavaScript code until it returns the value. You may specify the timeout and polling interval, if required.

...

This action runs the parameterized JavaScript code until it throws the execption. You may specify the timeout and polling interval, if required.

...

This action waits for the web page title to contain expected partial parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
title	Enter the expected partial value of the web page title.	No	String
timeOut	Enter the timeout (in seconds) to wait for the expected value.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout.	No	String
keyTitleContains	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.	No	String

...

This action waits until the web page title changes to other than the partial parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
title	Enter the expected partial value which should not be in the web page title.	No	String
timeOut	Enter the timeout (in seconds) to wait for the expected value.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout.	No	String
keyTitleNotContains	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.	No	String

...

This action waits for the web page title to contain exact expected parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
title	Enter the expected exact value of the web page title.	No	String
timeOut	Enter the timeout (in seconds) to wait for the expected value.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout.	No	String
keyTitleToBe	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.	No	String

...

This action waits until the web page title changes to other than the parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
title	Enter the expected exact value which should not be in the web page title.	No	String
timeOut	Enter the timeout (in seconds) to wait for the expected value.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout.	No	String
keyTitleNotToBe	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.	No	String

...

This action waits for the web page URL to contain expected partial parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
url	Enter the expected partial value of the web page URL.	No	String
timeOut	Enter the timeout (in seconds) to wait for the expected value.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout.	No	String
keyURLContains	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.	No	String

...

This action waits until the web page URL changes to other than the partial parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
url	Enter the expected partial value which should not be in the web page URL.	No	String
timeOut	Enter the timeout (in seconds) to wait for the expected value.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout.	No	String
keyURLNotContains	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.	No	String

...

This action waits for the web page URL to contain exact expected parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
url	Enter the expected the web page URL.	No	String
timeOut	Enter the timeout (in seconds) to wait for the expected URL.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the expected URL before exhausting timeout.	No	String
keyURLToBe	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.	No	String

...

This action waits until the specified web page URL value changes to other than the parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
url	Enter the URL which should not be the web page URL.	No	String
timeOut	Enter the timeout (in seconds) to wait for the URL to change.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the URL before exhausting timeout.	No	String
keyURLNotToBe	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.	No	String

...

This action waits until the specified web page URL value changes to the parameterized regular expression pattern. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
urlRegx	Enter the expected pattern for the URL. Pattern should be regular expression. Step fails in case the pattern is invalid.	No	String
timeOut	Enter the timeout (in seconds) to wait for the URL to change.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the URL before exhausting timeout.	No	String
keyURLPattern	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.	No	String

...

StorePageSource "PageSource"

StoreWindowHandleAtIndex

This action fetches the handle (identifier) of the specified window in the index and stores under the specified key. This key can the be used in action like SelectPage and ClosePopupBrowser to work on the specific page. This action can be used when the name of the window on which user needs to work on is not known.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strKey	Enter the key name to store the window handle.	Yes	String
index	Enter the index of the page whose handle you want to store.	Yes	String

Example :

StoreWindowHandleAtIndex "Key" "4"

SwitchWebExecutionPlatform

...

StoreWindowSize "Height" "Width"

SetWindowPosition

This action sets the position of the console window as per the specified position.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
xPosition	Enter the x coordinate of the position to set.	Yes	String
yPosition	Enter the y coordinate of the position to set.	Yes	String

...

Parameter Name	Parameter Description	Mandatory	Data Type
Key	Enter the key name under which you want to store the specified number of characters.	Yes	String
InputString	Enter the input string from which you want to store the characters.	Yes	String
Length	Specify the number of characters you want to store under the key name. Enter 0 if you want to store an empty string.	Yes	String

Example:

StoreStringFromLeft "Key" "John Doe" "4"

In this case, this action stores the value of Key as John.

StoreSqRoot

This action stores the square root of the specified number under the key. The stored key value can be retrieved using the key name.

...

Excel.StoreRowCount “Key” “D:\TrainingStatus.xlsx” “Sheet1” “True”

Excel.

...

StoreColumnDataOccurrance

This action stores the occurrence of the specific value into the specified column.

...

Parameter Name	Parameter Description	Mandatory	Data Type
filePath	Enter absolute path to the Excel file.	Yes	String
sheetname	Enter the sheet name from the Excel file in which you want to check for the data.	Yes	String
ColumnNumber	Enter the column ID or column name in which you want to add the value in the following format. - Column ID either can be an index number of the column or column header (mentioned at the top of each column, starts from the letter A). For example: to specify 2nd column, use col::2 or col::B - Column name: Enter the name of the column from which you want to store the value. This name is provided by the user while adding data.	Yes	String
ignoreBlankColumn	Specify whether you want to ignore the blank columns while calculation. Enter True to ignore blank columns. Enter False to consider even blank columns Data	Enter the data in the specified Excel row. In case you are statically creating an array, values should be separated by caret (^).	Yes	String
Key	Enter the key name under which you want to store the occurrence.	Yes	String

...

Parameter Name	Parameter Description	Mandatory	Data Type
File1	Enter the absolute path to the source file from which you want to compare the content.	Yes	String
File2	Enter the absolute path to the target file with which you want to compare the source file content.	Yes	String
CaseSensitive	Enter whether you want to consider case-sensitivity when comparing content. Value for this parameter can be True or False. Set True for case-sensitive comparison. Set False for case-insensitive comparison.	Yes	String
IgnoreWhitespace	Enter whether you want to consider whitespaces when comparing file contents. Value for this parameter can be True or False. Set True if you want to consider whitespaces. Set False if you want to ignore whitespaces. Note: Only leading and trailing whitespaces will be ignored if you set this parameter to True. Whitespaces inside the content will not be considered.	Yes	Boolean

Example:

File.CompareFileContents “C:\Users\admin\Downloads\Cust_Info.txt” “C:\Users\admin\Downloads\Client_list.txt” “False” “True”

...

Parameter Name

Parameter Description

Mandatory

Data Type

FilePath

Enter the absolute path to the file from which you want to store characters.

Yes

String

Key

Enter the key name in which you want to store the character count.

Yes

String

IgnoreWhitespace

Enter whether you want to consider whitespaces when storing character count. Value for this parameter can be True or False.

Set True if you do not want to consider tabs and spaces as characters.
Set False if you want to consider tabs and spaces as characters.

Note: A space or a tab is counted as one character.

Yes

String

Example:

FILE.StoreCharacterCount “C:\Users\admin\Downloads\Cust_Info.txt” “Key” “True”

...

Parameter Name	Parameter Description	Mandatory	Data Type
FilePath	Enter the absolute path to the file from which you want to store data.	Yes	String
RowNumber	Enter the row number from which you want to get and store the data.	Yes	String
Key	Enter the key name in which you want to store the data.	Yes	String

Example:

FILE.StoreStringByLineNumber “C:\Users\admin\Downloads\Cust_Info” “2” “Key”

...

Parameter Name

Parameter Description

Mandatory

Data Type

FilePath

Enter the absolute path to the file in which you want to verify data.

Yes

String

Data

Enter the data which you want to verify in the file.

Yes

String

CaseSensitive

Enter whether you want to consider case-sensitivity when verifying data. Value for this parameter can be True or False.

Set True for case-sensitive comparison.
Set False for case-insensitive comparison.

Yes

String

Example:

FILE.VerifyStringExistInFile “C:\Users\admin\Downloads\Cust_Info” “Qualitia” “True”

...

Parameter Name	Parameter Description	Mandatory	Data Type
FilePath	Enter the absolute path to the file which you want to verify.	Yes	String

Example:

File.VerifyFileExist “C:\Users\admin\Downloads\Cust_List.txt”

...

Parameter Name	Parameter Description	Mandatory	Data Type
FolderPath	Enter the path to the folder which you want to verify.	Yes	String

Example:

File.VerifyFolderExist “C:\Users\admin\Downloads\Cust_Info”

...

Parameter Name	Parameter Description	Mandatory	Data Type
array data	The array to be verified for ascending or descending order. The list of data provided should be carat(^) separated.	Yes	Array
datatype	This is the type of data considered for testing. Supported data types are STRING : These are combination of alphanumeric and special characters items. INTEGER : These are strictly numerical items.	Yes	String-
direction	The way the data are to be sorted, i.e. in either ascending or descending. Supported directions are: 1=indicates ascending 2=indicates descending	Yes	String

Example:
IsArraySorted "0^1^4^10" "Integer" "1"

...

Before executing this action, ensure you:

Download XPDF Tools and
Add XPDF tools directory to system path environment variables.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
pdfFile	Enter the absolute path to the PDF file in which you want to find the text.	Yes	String
textToFind	Enter the text you want to find in the specified PDF file.	Yes	String

Example:

PDF.VerifyStringExistInPDF “C:\Users\Qualitia\Cust_List.pdf” “Qualitia”

...

Before executing this action, ensure you:

Download XPDF Tools and
Add XPDF tools directory to system path environment variables.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
pdfFile	Enter the absolute path to the PDF file in which you want to find the text.	Yes	String
textToFind	Enter the text you want to find in the specified PDF file.	Yes	String
pageNumber	Enter the page number on which you want to search the specified text.	Yes	String

Example:

PDF.VerifyStringExistInPDFPage “C:\Users\Qualitia\Cust_List.pdf” “Qualitia” “2”

...

Before executing this action, ensure you:

Download XPDF Tools and
Download and install GnuWin
Add XPDF Tools and GnuWin installation directory to system path environment variables.
For example: D:\XPDF\xpdf-tools-win-4.00;C:\Program Files (x86)\GnuWin32\bin

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Pdf1	Enter the absolute path to the PDF file which you want to compare.	Yes	String
Pdf2	Enter the absolute path to the PDF file with which you want to compare the source file.	Yes	String
diffFilePath	Enter the absolute path to the text file in which you want to store the PDF comparison results.	Yes	String

Example:

PDF.ComparePDF “C:\Users\Qualitia\Cust_List.pdf” “C:\Users\Qualitia\Client_List.pdf” “C:\Users\Qualitia\Diff.txt”

...

WaitForNumberofWindowsToBe

This action waits until the number of open windows reaches the count specified in the parameter. You may use polling interval and timeout, if required.

Info

Note:

For the WaitFor actions to complete successfully, the specified object must exist.
Only for all the Wait actions, you can override the actual execution result with that of your choice using the statusIfConditionNotSatisfied parameter. For example, if you set the statusIfConditionNotSatisfied parameter to Pass, the action execution result will always be Pass, irrespective of whether the actual execution result was Fail or Defect.

...

Parameter Name	Parameter Description	Mandatory	Data Type
expectedNumber	Enter expected number of windows.	No	String
timeOut	Enter the timeout (in seconds) to wait.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check whether the specified count has reached.	No	String
keyNumOfWindows	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.	No	String

Example:

WaitForNumberOfWindowsToBe "3" "10" "500" "Key" "Defect"

...

This action runs the parameterized JavaScript code until it returns the value. You may specify the timeout and polling interval, if required.

...

This action runs the parameterized JavaScript code until it throws the execption. You may specify the timeout and polling interval, if required.

...

This action waits for the web page title to contain expected partial parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
title	Enter the expected partial value of the web page title.	No	String
timeOut	Enter the timeout (in seconds) to wait for the expected value.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout.	No	String
keyTitleContains	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.	No	String

...

This action waits until the web page title changes to other than the partial parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Info

Note:

For the WaitFor actions to complete successfully, the specified object must exist.
Only for all the Wait actions, you can override the actual execution result with that of your choice using the statusIfConditionNotSatisfied parameter. For example, if you set the statusIfConditionNotSatisfied parameter to Pass, the action execution result will always be Pass, irrespective of whether the actual execution result was Fail or Defect.

...

This action waits for the web page title to contain exact expected parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Info

Note:

For the WaitFor actions to complete successfully, the specified object must exist.
Only for all the Wait actions, you can override the actual execution result with that of your choice using the statusIfConditionNotSatisfied parameter. For example, if you set the statusIfConditionNotSatisfied parameter to Pass, the action execution result will always be Pass, irrespective of whether the actual execution result was Fail or Defect.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
title	Enter the expected exact value of the web page title.	No	String
timeOut	Enter the timeout (in seconds) to wait for the expected value.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the expected value before exhausting timeout.	No	String
keyTitleToBe	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.	No	String

...

This action waits until the web page title changes to other than the parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Info

Note:

For the WaitFor actions to complete successfully, the specified object must exist.
Only for all the Wait actions, you can override the actual execution result with that of your choice using the statusIfConditionNotSatisfied parameter. For example, if you set the statusIfConditionNotSatisfied parameter to Pass, the action execution result will always be Pass, irrespective of whether the actual execution result was Fail or Defect.

...

This action waits for the web page URL to contain expected partial parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Info

Note:

For the WaitFor actions to complete successfully, the specified object must exist.
Only for all the Wait actions, you can override the actual execution result with that of your choice using the statusIfConditionNotSatisfied parameter. For example, if you set the statusIfConditionNotSatisfied parameter to Pass, the action execution result will always be Pass, irrespective of whether the actual execution result was Fail or Defect.

...

This action waits until the web page URL changes to other than the partial parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Info

Note:

For the WaitFor actions to complete successfully, the specified object must exist.
Only for all the Wait actions, you can override the actual execution result with that of your choice using the statusIfConditionNotSatisfied parameter. For example, if you set the statusIfConditionNotSatisfied parameter to Pass, the action execution result will always be Pass, irrespective of whether the actual execution result was Fail or Defect.

...

This action waits for the web page URL to contain exact expected parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
url	Enter the expected the web page URL.	No	String
timeOut	Enter the timeout (in seconds) to wait for the expected URL.	No	String
pollingInterval	Enter the frequency (in milliseconds) after which you want to check for existence of the expected URL before exhausting timeout.	No	String
keyURLToBe	Enter the key name under which the status of this step will be stored. Stores 0 for Pass, 1 for Fail, and 2 for Defect.	No	String
statusIfConditionNotSatisfied	Enter the status of the step you want to show in the report in case the expected condition is not satisfied. value for this parameter can be Pass, Fail, and Defect.	No	String

...

This action waits until the specified web page URL value changes to other than the parameterized value. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Info

Note:

For the WaitFor actions to complete successfully, the specified object must exist.
Only for all the Wait actions, you can override the actual execution result with that of your choice using the statusIfConditionNotSatisfied parameter. For example, if you set the statusIfConditionNotSatisfied parameter to Pass, the action execution result will always be Pass, irrespective of whether the actual execution result was Fail or Defect.

...

This action waits until the specified web page URL value changes to the parameterized regular expression pattern. This comparison is case-sensitive. You may specify the timeout and polling interval, if required.

Info

Note:

For the WaitFor actions to complete successfully, the specified object must exist.
Only for all the Wait actions, you can override the actual execution result with that of your choice using the statusIfConditionNotSatisfied parameter. For example, if you set the statusIfConditionNotSatisfied parameter to Pass, the action execution result will always be Pass, irrespective of whether the actual execution result was Fail or Defect.

...

Versions Compared

Old Version 4

New Version 5

Key

PrintMessageinReport

UpdateValueFromJson

StoreWindowHandleAtIndex

SwitchWebExecutionPlatform

WaitForNumberofWindowsToBe

SetWindowPosition

StoreWindowHandleAtIndex

SwitchWebExecutionPlatform

SetWindowPosition

StoreSqRoot

Excel.

StoreColumnDataOccurrance

WaitForNumberofWindowsToBe

Note:

Note:

Note:

Note:

Note:

Note:

Note:

Note: