Page Comparison

OpenFirefoxBrowser

This action opens a new blank Mozilla Firefox browser.

This action does not have any input parameter.

Example:

OpenFirefoxBrowser

OpenIEBrowser

This action opens a new blank IE browser.

This action does not have any input parameter.

Example:

OpenIEBrowser

CloseAllOpenedFirefoxBrowsers

This action closes all open Firefox browsers on the desktop.

This action does not have any parameters.

Example:

CloseAllOpenedFirefoxBrowsers

CloseAllOpenedIEBrowsers

This action closes all open IE browsers on the desktop.

This action does not have any parameters.

Example:

CloseAllOpenedIEBrowsers

ExitSuite

This action stops the execution of current suite.

This action does not have any input parameter.

Example:

ExitSuite

ExitTask

This action skips the next step and execution continues with the next task. This action is not available for test case level steps.

This action does not have any input parameter.

Example:

ExitTask

ExitTCIteration

This action skips the current iteration of test case and executes next iteration. In case of a single TC iteration the test case execution will stop.

This action does not have any input parameter.

Example:

ExitTCIteration

ComparePattern

This action verifies that the data passed by the user matches the specified pattern. Match can either be case-sensitive or insensitive.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strMainString	The main String in which the substring will be searched for. Even a key name can be passed here enclosed in braces.	Yes	String
strSubString	The string to be searched for in the main string. Even a key name can be passed here enclosed in braces.	Yes	String
blnCase	The kind of comparison to be done. True - Case sensitive comparison False – Case insensitive comparison	Yes	Boolean

Example:
Consider a bank application where on adding a user an account number is generated which is unique and consists of alphanumeric characters. The number of characters in that account number is 10 where the first 5 are alphabets and remaining five are numbers.

Ex: Suppose the account number is YuIFp96062. If this has to be verified for the pattern mentioned we can use the action ComparePattern as follows:

strPattern - _^[a-z]{5~}[0-9]_{5}$
strData – YuIFp96062
blnCase - False

ComparePattern "_^[a-z]{5~}[0-9]_{5}$" "YuIFp96062" "False"

CompareString

Compare two strings. The comparison can be either case sensitive / non case-sensitive. Even a key can be passed as one of the parameters for comparison where the CompareString function will retrieve the value from the key and that value will be compared with expected.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strString1	String 1 to be compared. Even a key name can be passed here enclosed in braces.	Yes	String
strString2	String 2 to be compared. Even a key name can be passed here enclosed in braces.	Yes	String
blnCase	The kind of comparison to be done True - Case sensitive comparison False – Case insensitive comparison	Yes	Boolean

Example:

Suppose you have to compare the caption of a button, say the caption is 'Cancel', stored in a key. Now the StorePropertyFromObject action can be used to store the actual caption in the specified key let's say MyCapKey. Now the user can verify this caption by using the action CompareString as follows:

strString1- {MyCapKey}
strString2 – Cancel
blnCase - True

CompareString "{MyCapKey}" "Cancel" "True"

DoubleClick

This action double clicks at the specified location of the screen or object from the application under test.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
xcoordinate	Enter the x-coordinate of the screen where you want to perform double click.	Yes	Integer
ycoordinate	Enter the y-coordinate of the screen where you want to perform double click.	No	Integer
Button	Specify which button of the mouse you want to press while performing the double click action. Valid parameters are left, middle, and right. Default is left.	No	String

Example:

DoubleClick “233” “342” “Left”

Table of Contents

maxLevel	2
minLevel	2

OpenURL

This action opens the specified URL. Qualitia user can specify the browser and browser version in the parameters section to be used when opening URL.

Ensure you have enabled HP Functional Testing Agent on your execution browsers (IE, Firefox, and Google Chrome).
Ensure the browser version installed on your execution device is compatible with HPE UFT.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Browser Type	Enter the browser name in which you want to open the URL. Parameters can be as follows: IE: This will open URL in Internet Explorer. Firefox: This will open URL in Mozilla Firefox. Chrome: This will open URL in Google Chrome.	Yes	String
URL	Enter the URL to be opened.	Yes	String
Browser version	Enter the major and minor version of the browser installed on testing machine. For example, if browser version is 54.9.0.3323, then enter only 54.9.	Yes	String
Path	This parameter is applicable only when using Google Chrome browser. Enter the absolute path of the chrome.exe from the Google Chrome installed location.	Yes (for Chrome only)	String

Example:

OpenURL “Chrome” “http://www.google.com” “53.8” “C:\Program Files\Google\Chrome\Application\chrome.exe”

When using this action, Qualitia defines its own set of system variables which can be used later when executing test cases. These variables are stored in Qualitia with their expressions (TRUE or FALSE). Following is the list of system variables that Qualitia stores when executing the OpenURL action.

$$_ISIE: If browser type is set as IE (Internet Explorer), then this expression is stored as TRUE. Here, other two ($$_ISFIREFOX and $$_ISCHROME) are stored as FALSE.
$$_ISFIREFOX: If browser type is set as FIREFOX (Mozilla Firefox), then this expression is stored as TRUE. Here, other two ($$_ISIE and $$_ISCHROME) are stored as FALSE.
$$_ISCHROME: If browser type is set as CHROME (Google Chrome), then this expression is stored as TRUE. Here, other two ($$_ISFIREFOX and $$_IE) are stored as FALSE.

Note: It is recommended to close all the unnecessary browsers before starting the test execution or object spying using UFT.

CalculateDifferenceInDateAndStore

This action stores the difference between two specified dates under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strKey	The key in which the difference will be stored.	Yes	String
interval	It is the expression that you want to use to calculate the differences between from date and to date. Please refer to the Interval section below for more examples of it.	Yes	String
fromDate	Enter the date from.	Yes	String
toDate	Enter the date to.	Yes	String

Interval: The interval parameter can have the following values:

Parameter	Description
YYYY	Year
Q	Quarter
M	Month
Y	Day of year
D	Day
W	Weekday
WW	Week of year
H	Hour
N	Minute
S	seconds

Example:
CalculateDifferenceInDateAndStore "Key" "D" "12-Dec-2016" "12-Dec-2027"

CloseApplication

This action closes the specified application.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Processname	Process Name of the application that is to be closed.	Yes	String

Example:
CloseApplication "notepad.exe"

CompareTabularResults

This action compares two CSV files and displays the comparison in MS Excel/Kingsoft format. A link will be displayed in the HTML report if there is any data mismatch. You can click the link to view the difference in either of the spreadsheet as parameterized by the user. This action performs an exact match of the data. Before comparing the data will be trimmed for any trailing spaces. The comparison is case-sensitive.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
File1 SourceFilePath	File path of first csv file to be compared	Yes	String
File2 TargetFilePath	File path of second csv file to be compared	Yes	String
Format ResultFileFormat	This is the spreadsheet where the mismatch data [if any] will be displayed. The current supported formats are "MSExcel" and "KSOExcel". If the data mismatch is to be displayed in MS Excel then pass the parameter as " MSExcel" and similarly, "KSOExcel" for Kingsoft	Yes	String

Example:

CompareTabularResults "D:\File1.csv" "D:\File2.csv" "MSExcel"

ComputeExpression

This action evaluates mathematical, relational, logical operations and stores the result in a key.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strKey	The key on which the result of the evaluation need to be stored.	Yes	String
strexpression	The expression to be evaluated	Yes	String

Example:

Mathematical Expression

ComputeExpression "result" "24*2+4"

Relational Expressio

ComputeExpression "result" "10*2<30"

Logical Expression

ComputeExpression "result" "10*2+1>19&10*2+2<23"

ExecuteDDLQueryAndStoreInFile

This action executes data definition queries like select and stores the result set of the fired query. The result set is stored in a CSV file. The action supports and is tested for database Oracle 10g.

Before using this action, ensure that the required database and database drivers are installed. Below is basic information on the oracle drivers and connection with Vbscript.

Oracle10g:

For interacting with the database you would need a driver that is supported in VbScript to interact with Oracle 10 g. One of the drivers can be as follow. The driver would need to be installed before interacting with the database.

Driver - "Oracle in OraDb10g_home1".
You would need to know the following details as well.
Database Name- is the oracle database to which the user wishes to connect.
User ID – The username to connect to the database
Password - The password to connect to the database

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
driver	The driver for the database	Yes	String
dB	The database name on which the query will be fired	Yes	String
username	The user name to connect to the database	Yes	String
password	The password to connect to the database	Yes	String
query	The query that needs to be executed. This keyword is design such that it can store result set. Hence this keyword is beneficial for SQL queries that can return result set	Yes	String
filename	The complete path of the file in which the results of the database query is to be stored	Yes	String

Example:
ExecuteDDLQueryAndStoreInFile "Oracle in OraDb10g_home1" "ORCL" "system" "admin" "Select * from sales_master where id=100" "{Key_SQL13_InwardRegisterControl_ActData_FilePath}"

ExecuteDMLQueryAndStoreInKey

This action executes data manipulation queries like update, delete, and stores the result into a key. This action supports and is tested for database Oracle 10g.

Before using this action, ensure that the required database and database drivers are installed. Below is basic information on the oracle drivers and connection with Vbscript.

Oracle10g:

For interacting with the database you would need a driver that is supported in VbScript to interact with Oracle 10 g. One of the drivers can be as follow. The driver would need to be installed before interacting with the database.

Driver - "Oracle in OraDb10g_home1".
You would need to know the following details as well.
Database Name- is the oracle database to which the user wishes to connect.
User ID – The username to connect to the database
Password - The password to connect to the database

Input Parameters

Parameter Name	Parameter Description	Mandatory	Data Type
driver	The driver for the database	Yes	String
url	The connection string to connect to the database, basically the server address	Yes	String
username	The user name to connect to the database	Yes	String
password	The password to connect to the database	Yes	String
query	The dml query that needs to be executed	Yes	String
key	The key in which the result of the database query need to be stored	Yes	String

Example:

ExecuteDMLQueryAndStoreInKey "Microsoft ODBC for Oracle" "Server=localhost" "system" "admin" "Update * from sales_master where id=100" "{Key_Status}"

ExecuteFile

This action executes the batch file specified by the user.

Input Parameters

Parameter Name	Parameter Description	Mandatory	Data Type
FilePath	The complete path of the file to be executed.	Yes	String

Example:

ExecuteFile "C:\test\batchfile1.bat"

IsArraySorted

This action verifies whether the array is sorted in ascending/descending order.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
array data	The array to be verified for ascending or descending order. The list of data provided should be carat(^) separated.	Yes	Array
datatype	This is the type of data considered for testing. Supported data types are STRING : These are combination of alphanumeric and special characters items. INTEGER : These are strictly numerical items.	Yes	-
direction	The way the data are to be sorted, i.e. in either ascending or descending. Supported directions are: 1=indicates ascending 2=indicates descending	Yes	String

Example:
IsArraySorted "0^1^4^10" "Integer" "1"

NavigateFireFoxBrowser

This action opens the specified URL in the Mozilla Firefox browser. If there is any blank firefox browser on the desktop, uses the same browser, otherwise Qualitia opens a new blank browser and navigates to the URL.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strURL	Enter the URL to open.	Yes	String

Example:

NavigateFireFoxBrowser "http://www.google.com"

NavigateIEBrowser

This action opens the specified URL in the Internet Explorer (IE) browser. If there is any blank IE browser on the desktop, uses the same browser, otherwise Qualitia opens a new blank browser and navigates to the URL.

This browser can be used in conjunction with OpenIEBrowser action.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strURL	Enter the URL to open.	Yes	String

Example:

NavigateIEBrowser "http://www.google.com"

OpenApplication

This action opens the application with specified path.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strPath	Enter the absolute path of the application to be opened.	Yes	String

Example:

OpenApplication "C:\WINDOWS\system32\notepad.exe"

OpenSAPApplication

This action opens the SAP application.

Input Parameters

Parameter Name	Parameter Description	Mandatory	Data Type
AppPath	Enter the path of the application to be opened.	Yes	String
strValue	Enter the module name to be opened of the SAP application.	Yes	String

Example:

OpenSAPApplication "D:/SampleSAPapplicaiton.exe" "Admin"

PressKey

This action sends one or more keystrokes to the active window (as if typed on the keyboard).

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strKey	Enter the key to be pressed from the keyboard.	Yes	String

Example:

Suppose the user want to open the Find dialog on the Browser window under test. Manually this is done by pressing the keys Control and F simultaneously. This opens the Find dialog on the browser window. The same thing can be done using the action PressKey .The data to be passed to the keyword in this case will be given as ~^F where ^ means Control. (See the list below for the keys and their meaning.

The action returns 0, if the key is pressed successfully, otherwise, it will return 1 in any other case.

Important Note:

Ideally the data to be passed here is only ^F, however as ^ has a special meaning in Qualitia it has to be preceded with an escape sequence ~. Hence the data passed will be ~^F.

Make sure to prefix an escape sequence which is a caret for the following characters which has a special meaning in Qualitia. These characters are {,}, ^.

For example, if you want to press the {F1} key, then user should pass data as {F1}

Use the PressKey method to send keystrokes to applications that have no automation interface. Most keyboard characters are represented by a single keystroke. Some keyboard characters are made up of combinations of keystrokes (CTRL+SHIFT+HOME, for example). To send a single keyboard character, send the character itself as the string argument.

For example, if you want to send the letter x, send the string argument "x".

You can use PressKey to send more than one keystroke at a time. To do this, create a compound string argument that represents a sequence of keystrokes by appending each keystroke in the sequence to the one before it. For example, to send the keystrokes a, b, and c, you would send the string argument "abc". The PressKey method uses some characters as modifiers of characters (instead of using their face-values). This set of special characters consists of parentheses, brackets, braces, and the:

plus sign "+",
caret "^",
percent sign "%",
tilde "~"

Send these characters by enclosing them within braces "{}". For example, to send the plus sign, send the string argument "{+}". Brackets "[ ]" have no special meaning when used with PressKey, but you must enclose them within braces to accommodate applications that do give them a special meaning (for dynamic data exchange (DDE)).

To send bracket characters, send the string argument "{[}" for the left bracket and "{]}" for the right one.
To send brace characters, send the string argument "}" for the left brace and "{" for the right one.

Some keystrokes do not generate characters (such as ENTER and TAB). Some keystrokes represent actions (such as BACKSPACE and BREAK).

To send these kinds of keystrokes, send the arguments shown in the following table:

Key	Argument
BACKSPACE	{BACKSPACE}, {BS}, or {BKSP}
BREAK	{BREAK}
CAPS LOCK	{CAPSLOCK}
DEL or DELETE	{DELETE} or {DEL}
DOWN ARROW	{DOWN}
END	{END}
ENTER	{ENTER} or ~
ESC	{ESC}
HELP	{HELP}
HOME	{HOME}
INS or INSERT	{INSERT} or {INS}
LEFT ARROW	{LEFT}
NUM LOCK	{NUMLOCK}
PAGE DOWN	{PGDN}
PAGE UP	{PGUP}
PRINT SCREEN	{PRTSC}
RIGHT ARROW	{RIGHT}
SCROLL LOCK	{SCROLLLOCK}
TAB	{TAB}
UP ARROW	{UP}
F1	{F1}
F2	{F2}
F3	{F3}
F4	{F4}
F5	{F5}
F6	{F6}
F7	{F7}
F8	{F8}
F9	{F9}
F10	{F10}
F11	{F11}
F12	{F12}
F13	{F13}
F14	{F14}
F15	{F15}
F16	{F16}

To send keyboard characters that are comprised of a regular keystroke in combination with a SHIFT, CTRL, or ALT, create a compound string argument that represents the keystroke combination. You do this by preceding the regular keystroke with one or more of the following special characters:
Key Special Character

SHIFT: +
CTRL: ^
ALT: %

When used this way, these special characters are not enclosed within a set of braces.

To specify that a combination of SHIFT, CTRL, and ALT should be held down while several other keys are pressed, create a compound string argument with the modified keystrokes enclosed in parentheses. For example, to send the keystroke combination that specifies that the SHIFT key is held down while:

e and c are pressed, send the string argument "+(ec)".
e is pressed, followed by a lone c (with no SHIFT), send the string argument "+ec".

You can use the PressKey method to send a pattern of keystrokes that consists of a single keystroke pressed several times in a row. To do this, create a compound string argument that specifies the keystroke you want to repeat, followed by the number of times you want it repeated. You do this using a compound string argument of the form {keystroke number}. For example, to send the letter "x" ten times, you would send the string argument "{x 10}". Be sure to include a space between keystroke and number.

Info
The only keystroke pattern you can send is the kind that is comprised of a single keystroke pressed several times. For example, you can send "x" ten times, but you cannot do the same for "Ctrl+x". You cannot send the PRINT SCREEN key {PRTSC} to an application. To send a space, send the string " ".

ReplaceAndStoreText

This action replaces a substring by another substring into a source string and stores the resulting string in the given key.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
SourceText	The complete path of the file to be executed.	Yes	String
TextToBeReplaced	Substring that is to be replaced from the SourceText.	Yes	String
TextToBeReplacedBy	Substring by which replacement is to be done.	Yes	String
IsCaseSensitive	Indicates case sensitive.	Yes	String
Key	Key in which final output will be stored.	Yes	String

Example:

ReplaceAndStoreText "India" "i" "Z" "True" "key1"

RestJsonResp

This action stores JSON response of the specific key for RESTful service.

Input Parameters

Parameter Name	Parameter Description	Mandatory	Data Type
URL	Enter the URL of the REST service.	Yes	String
Method	Enter the method to request the service.	Yes	String
Filepath	Enter the absolute path of the .txt file from where the request is to be taken.	Yes	String
Key	Enter the key for which the value is to be stored.	Yes	String
Response	The key value will be stored in this variable.	Yes	String

Example:
RestJsonResp "http://abcd.cbdx.com" "Get/Post" "D:/sample.txt" "Name" "Key"

SAPAutoLogon

This action connects and logs on to the designated SAP server.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
ServerDescription	Enter the server details that need to be connected.	Yes	String
Client	Enter the client details that need to be connected.	Yes	String
User	Enter the User name to use when connecting to the server.	Yes	String
Password	Enter the password to use when connecting to the server.	Yes	String
Language	Enter the 2-digit code to select the language.	Yes	String

Example:

SAPAutoLogon "Calderone" "4700" "Qualitia" "Password" "EN"

SAPAutoLogonByIP

This action connects and logs on to an SAP server according to its IP address.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
ConnectionString	Enter the connection string that needs to be connected.	Yes	String
Client	Enter the client details that need to be connected.	Yes	String
User	Enter the User name to use when connecting to the server.	Yes	String
Password	Enter the password to use when connecting to the server.	Yes	String
Language	Enter the 2-digit code to select the language.	Yes	String

Example:

SAPAutoLogonbyIP "/F/123.132.75.5/S/3200" "4700" "Qualitia" "Password" "EN"

SAPAutoLogonByTargetSystem

This action connects and logs on to an SAP server according to specified target system.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
TargetSystem	Enter the target system that needs to be connected.	Yes	String
Client	Enter the client details that need to be connected.	Yes	String
User	Enter the User name to use when connecting to the server.	Yes	String
Password	Enter the password to use when connecting to the server.	Yes	String
Language	Enter the 2-digit code to select the language.	Yes	String

Example:

SAPAutoLogonbyIP "C5P" "3200" "4700" "Qualitia" "Password" "EN"

SAPCloseConnections

This action closes all the existing connections that are open currently.

This action does not have any input parameters.

Example:
SAPCloseConnections

SAPOpenConnection

This action opens the connection to the specified SAP server.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
ServerDescription	Enter the server description that needs to be connected.	Yes	String

Example:

OpenConnection "Calderone"

SAPOpenConnectionByIP

This action opens a connection to the specified SAP server according to its IP address.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
ConnectionString	Enter the connection string that needs to be connected.	Yes	String

Example:
OpenConnectionByIP "/F/123.132.75.5/S/3200"

SAPOpenConnectionByTargetSystem

This action opens a connection to the specified SAP server according to its target system.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
TargetSystem	Enter the target system that needs to be connected.	Yes	String

Example:
OpenConnectionByIP "C5P"

SAPStartBPCATracing

This action begins running the Business Process Change Analyzer to detect changes in a transaction's objects (as compared to the TBOM).

This action does not have any input parameters.

Example:

SAPStartBPCATracing

SAPStopBPCATracing

This action stops the Business Process Change Analyzer.

This action does not have any input parameters.

Example:

SAPStopBPCATracing

SecureStoreVariable

This action securely stores the value in the specified key. The value is encrypted for security purposes but value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strkey	The variable in which the string data is stored	Yes	String
value	Enter the value that needs to be stored securely. The value will be encrypted.	Yes	String

Example:

To store a data in a variable:

SecureStoreVariable "pwd" "Encrypt(ABC)"

When the focus is moved away from parameter Qualitia automatically encrypts the data ABC and result in a secured text like:

"vHpmlfI4R3PQkCN4sZnuqw==þNWE3ZDdkNjE3N22ODgxMzQwYWI1MTA3YWNDc="

StoreArrayItem

This action gets the value from an array and stores it into the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameters Name	Parameter Description	Mandatory	Data Type
Key	Enter the key in which the Array is to be stored.	Yes	String
ArrayName	Enter the array name from which values are to be stored.	Yes	String
ArrayIndex	Enter the array index from which values are to be stored.	Yes	String

Example:

StoreArrayItem "Key" "Name" "3"

StoreObjectInstanceCount

It stores the total number of children of desktop class for the given set of arguments in a given key. Argument key and value should be separated by '=' and multiple key/val pair should be separated by a comma ','.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
ObjectDescription	Specification/property of the object whose instance count is to be stored. A general format is :"key1=value1,key2=value2,key3=value3"	Yes	String
Key	The key in which count is to be stored.	Yes	string

Example:
StoreObjectInstanceCount "Class Name=JavaWindow,title=LibrarySystem" "MyObjInstanceCountKey"

StoreSplitString

This action splits the string based on the delimiter specified by the user. Any of the split items can be stored, the particular item that is to be stored the user should provide the index of that item.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strKey	The variable in which the specified indexed item of the split string is to be stored	Yes	String
strMainString	The string which is to be split	Yes	String
Delimiter	The delimiter to be used for splitting	Yes	String
index	The index of the item which is to be store after splitting	Yes	Integer

Example:

StoreSplitString "StoreItem" "This is ; a sample ; String" ";" "2 "

StoreStringLength

Increments the string length by the value specified by the user and stores it into a variable.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strKey	A key in which a length will be stored	Yes	String
strMainStr	A string from which a length will be derived	Yes	String
intIncrement	The value by which the length needs to be incremented.	Yes	Integer

Examples:
StoreStringLength "length" "This is a test" "3"

StoreSubString

This action stores substring of specified length from main string from the specified index.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strKey	A key in which a substring will be stored	Yes	String
strMainString	A string from which a substring will be derived	Yes	String
intStart	A position from which substring will be derived from main string	Yes	Integer
intLen	Length of substring starting from a position specified in parameter intStart	Yes	Integer

Examples:

StoreSubString "SubStr" "Qualitia" "4" "4"

StoreVariable

Store a particular string value in a variable (key).

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strKey	A key in which you want to store the value.	Yes	String
Value	Value to be stored.	Yes	String

Example:

StoreVariable "url" "http://www.google.com" NavigateIEBrowser "{url}"

TrimAndStoreText

This action trims the preceding and succeeding spaces and stores the resulting string in the given key.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strText	The string which has to be trimmed.	Yes	String
strKey	The key in which result is to be stored.	Yes	String

Example:
TrimAndStoreText " John Doe " "FullName"

Suppose, you give the strText as " John Doe " to store the final string inside the key "FullName". End of the execution, John Doe will be stored in the key FullName.

VerifyDataType

This action verifies if the data type is numeric or string.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
data	Enter the data to verify.	Yes	String
dataType	The data type against which the data is to be verified. The value of this is • numeric • string	Yes	string

Example:
VerifyDataType "4.78" "numeric"
This shall verify if 4.78 is numeric
VerifyDataType "This is a test" "string"
This shall verify if "This is a test" is a string
Anything which is not numeric shall be considered as a string.
Example: "Enter 123", "23/02/20" etc shall be considered as a string.

VerifyDifference

This action verifies the difference between two integers.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
int1	First integer to be compared	Yes	Integer
Int2	second integer to be compared	Yes	Integer
intDiff	Expected difference between the two integers against which actual difference will be verified	Yes	Integer

Examples:

VerifyDifference "100" "75" "25"

VerifyStringContainsValue

This action verifies that the substring is available within the main string. Comparison can either be case sensitive or insensitive.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
strMainString	The main String in which the substring will be searched for. Even a key name can be passed here enclosed in braces.	Yes	String
strSubString	The string to be searched for in the main string. Even a key name can be passed here enclosed in braces.	Yes	String
blnCase	The kind of comparison to be done. True - Case sensitive comparison False – Case insensitive comparison	Yes	Boolean

Example:
Consider an application where order for books are placed .Once an order is placed the confirmation message and order number is displayed in a WebElement. Lets consider the message displayed in the WebElement is 'Your order has been placed successfully. Order Number is 10'. As the order number is dynamic you can verify part of the string using the action VerifyStringContainsValue. User can use the keyword StorePropertyFromObject to store the web elements value in a key say "MyElementKey"
Now the user can verify this value by using the action VerifyStringContainsValue as follows
strMainString - { MyElementKey }
strSubString – Your order has been placed successfully. Order Number is
blnCase - True
VerifyStringContainsValue "{MyElementKey}" "Your order has been placed successfully
Order Number is" "True"

WaitFor

This action makes a tool wait for the specified period of time.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
intExpTimeSecs	'intExpTimeSecs' is the specified seconds that the tool is expected to pause.	Yes	Integer

Example:
Waitfor "8"

WriteLog

This action helps Qualitia users to select the appropriate status and information message to be displayed in the execution report based on the test case requirements.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Status	Enter the result status to be displayed in the report. The report status should be Pass, Fail, or Defect.	Yes	String
Message	Enter the message to be displayed for the respective test step in the execution report.	Yes	String

Example:

WriteLog "Defect" "The value in the edit box should be Username"

WriteTextToFile

This action allows users to write or append the text in the specified file.

User performing this action should have write access to the corresponding file and folder.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
FileName	Enter the absolute path to the file in which you want to make changes.	Yes	String
FileContent	Enter the content to be overwritten or appended.	Yes	String
Mode	Value of this parameter can be OVERWRITE or APPEND. If user keeps mode empty, it will be considered as append.	Yes	String

Example:
WriteTextToFile "C:\Users\Notepad.txt" "Qualitia" "Append"

EXCEL.StoreCellData

This action stores the value available in the specified cell. You can then use this data while developing tasks and test cases.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
filePath	Enter absolute path to the Excel file from which you want to get and store the value.	Yes	String
sheetname	Enter the sheet name from the Excel file from which value is to be stored.	Yes	String
rowNumber	Enter the row number of the cell from which you want to store the value.	Yes	Integer
column	Enter the column ID or column name from which you want to store the value in the following format. - Column ID either can be an index number of the column or column header (mentioned at the top of each column, starts from the letter A). For example: to specify 2nd column, use col::2 or col::B - Column name: Enter the name of the column from which you want to store the value. This name is provided by the user while adding data.	Yes	String
Key	Enter the key name under which you want to store the value. The key value can be retrieved using the key name.	Yes	String

Example:

StoreCellData “D:\TrainingStatus.xlsx” “Sheet1” “3” “Col::3” “Key”

EXCEL.WriteToRow

This action adds specified value or a set of values into the specified row of the Microsoft excel file.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
filePath	Enter absolute path to the Excel file.	Yes	String
sheetname	Enter the sheet name from the Excel file in which you want to add the values.	Yes	String
rowNumber	Enter the row number in which you want to add the value.	Yes	Integer
column	Enter the column ID or column name in which you want to add the value in the following format. - Column ID either can be an index number of the column or column header (mentioned at the top of each column, starts from the letter A). For example: to specify 2nd column, use col::2 or col::B - Column name: Enter the name of the column from which you want to store the value. This name is provided by the user while adding data.	Yes	String
data	This is the data to be added into the specified Excel row. In case you are statically creating an array, values should be separated by caret (^).	Yes	Array
overWrite	Specify whether you want to overwrite the existing data or you want to add another row to add this data. Values for this parameter can be as follows: To add new row before the row specified above, use Previous. To add new row after the row specified above, use Next. To overwrite new values over the existing set of values, use Current.	Yes	String

Example:

WriteToRow “D:\TrainingStatus.xlsx” “Sheet1” “3” “Col::3” “PASS^PASS^FAIL^WIP” “Current”

EXCEL.WriteToColumn

This action adds specified value or a set of values into the specified column of the Microsoft excel file.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
filePath	Enter absolute path to the Excel file.	Yes	String
sheetname	Enter the sheet name from the Excel file in which you want to add the values.	Yes	String
rowNumber	Enter the row number in which you want to add the value.	Yes	Integer
column	Enter the column ID or column name in which you want to add the value in the following format. - Column ID either can be an index number of the column or column header (mentioned at the top of each column, starts from the letter A). For example: to specify 2nd column, use col::2 or col::B - Column name: Enter the name of the column from which you want to store the value. This name is provided by the user while adding data.	Yes	String
data	This is the data to be added into the specified Excel row. In case you are statically creating an array, values should be separated by caret (^).	Yes	Array
overWrite	Specify whether you want to overwrite the existing data or you want to add another row to add this data. Values for this parameter can be as follows: To add new row before the row specified above, use Previous. To add new row after the row specified above, use Next. To overwrite new values over the existing set of values, use Current.	Yes	String

Example:

WriteToColumn “D:\TrainingStatus.xlsx” “Sheet1” “3” “Col::3” “USER1^ USER2^ USER3^ USER4” “Previous”

EXCEL.StoreColumnCount

This action stores the total number of columns present in the specified sheet of Microsoft Excel.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
filePath	Enter absolute path to the Excel file.	Yes	String
sheetname	Enter the sheet name from the Excel file from which you want to store the column count.	Yes	String
ignoreBlankColumn	Specify whether you want to ignore the blank columns while calculation. To ignore blank columns, use True. To consider even blank columns, use False.	Yes	Boolean
Key	Enter the key name under which you want to store the value.	Yes	String

Example:

Excel.StoreColumnCount “D:\TrainingStatus.xlsx” “Sheet1” “True” “Key”

EXCEL.StoreRowCount

This action stores the total number of rows present in the specified sheet of Microsoft Excel.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
filePath	Enter absolute path to the Excel file.	Yes	String
sheetname	Enter the sheet name from the Excel file from which you want to store the row count.	Yes	String
ignoreBlankColumn	Specify whether you want to ignore the blank rows while calculation. To ignore blank columns, use True. To consider even blank columns, use False.	Yes	Boolean
Key	Enter the key name under which you want to store the value.	Yes	String

Example:

Excel.StoreRowCount “D:\TrainingStatus.xlsx” “Sheet1” “True” “Key”

EXCEL.StoreColumnDataOccurance

This action stores the occurrence of the specific value into the specified column.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
filePath	Enter absolute path to the Excel file.	Yes	String
sheetname	Enter the sheet name from the Excel file in which you want to check for the data.	Yes	String
column	Enter the column ID or column name in which you want to add the value in the following format. - Column ID either can be an index number of the column or column header (mentioned at the top of each column, starts from the letter A). For example: to specify 2nd column, use col::2 or col::B - Column name: Enter the name of the column from which you want to store the value. This name is provided by the user while adding data.	Yes	String
cellData	Enter the data which you want to verify in to the specified column.	Yes	String
Key	Enter the key name under which you want to store the occurrence.	Yes	String

Example:

Excel.StoreColumnDataOccurrence “D:\TrainingStatus.xlsx” “Sheet1” “col::3” “PASS” “Key”

EXCEL.StoreCellText

This action reads the Microsoft Excel file and stores the data from the specified cell of the specified sheet in the key. The value stored under the key can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
fileName	Enter the Microsoft Excel file name from which you want to store the value.	Yes	String
sheetNum	Enter the sheet number from the Microsoft Excel work book from which you want to store the value. Index starts from 1.	Yes	String
rowNum	Enter the row number of the cell from which you want to store the value.	Yes	Integer
colNum	Enter the column number of the cell from which you want to store the value.	No	String
strKey	Enter the key name under which you want to store value from the cell.	Yes	String

Example:

EXCEL.StoreCellText “C:\Users\Qualitia\Cust_Name.xlsx” “2” “4” “5” “Key”

Excel.StoreCellDataFromFile

This action checks the condition added by the user and stores the matching data from specified Excel cell into the specified key.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
filename	Enter the absolute path to the excel file from which you want to read and store the data.	Yes	String
sheetName	Enter the name of the sheet from which you want to fetch the data.	Yes	String
colName	Enter the column name from which you want to fetch the data.	Yes	String
Condition	Enter the condition which you want to match for getting the desired data.	Yes	String
Separator	Specify the separator which you have used to separate column name and data while adding the condition. You can use any character as a separator (equal to [=] sign in the example mentioned below). Use caret sign (^) as a connection string.	Yes	String
strKey	Enter the key in which you want to store the data.	Yes	String

Example:

Suppose there is list of employees and you want to store the employee ID of the specific employee from the list. (refer to the image below). To store the employee ID of Jane, you can use this action as follows:

"D\Book1.xlsx" "Sheet1" "Employee ID" "FirstName=Jane^LastName=Doe^Designation=Asst.Manager" "=" "ID"

End of the execution, action stores the Employee ID of Jane i.e. 232 into the specified key ID.

IMAGE.CompareTwoImages

This action compares two images. The file extension and resolution of both the images (source and target) should be same, otherwise, the step will fail.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
SourceImagePath	Enter the absolute path to the source image which you want to compare.	Yes	String
TargetImagePath	Enter the absolute path to the target image with which you want to compare the source image.	Yes	String

Example:

IMAGE.CompareTwoImages “C:\Users\Qualitia\Cust_Sign.png” “C:\Users\Qualitia\Cust_Logo.png”

Date.StoreModifiedDate

This action modifies the date interval based on the data provided by user and stores the modified date in the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Inputdate	Enter the date to which you want to add the interval.	Yes	String
Interval	Enter the interval which you want to modify. Value for this parameter can be as follows: yyyy - Year q - Quarter m - Month y - Day of year d - Day w - Weekday ww - Week of year h - Hours n - Minutes s – Seconds	Yes	String
Data	Enter the number of intervals you want to add to the input date. The number can be positive for future dates and negative for dates in the past.	Yes	Integer
Key	Enter the key name under which you want to store the modified date. The key value can be retrieved using the key name.	Yes	String

Example:

Data.StoreModifiedDate “02/28/2001” “yyyy” “10” “Key”

Post execution, Qualitia will store 02/28/2010 in the key.

Date.ChangeDateFormat

This action modifies format of the date and time based on the format specified by the user and stores the date and time in the modified format under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Inputdate

Enter the date whose format you want to change.

Yes

String

Interval

Enter the value for the format you want to update the date into. Value for this parameter can be as follows:

0 – Converts current date into mm/dd/yy and time (if specified) into hh:mm:ss PM/AM.
1 – Converts current date into weekday, monthname, year format.
2 – Converts current date into mm/dd/yy format.
3 – Converts current time into hh:mm:ss PM/AM format
4 - Converts current time into hh:mm format.

Yes

String

Key

Enter the key name under which you want to store the modified date. The key value can be retrieved using the key name.

Yes

String

Example:

Date.ChangeDateFormat “02/28/2001” “1” “Key”

Post execution, Qualitia will store Monday, February, 2010 in the key.

DB.ExecuteDDLQueryAndStoreInFile

This action executes Data Definition Language (DDL) queries and stores the result set of the fired query in a text file.

Info

title	Prerequisite:

Before using this action, ensure that the required databases and database drivers are installed.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

ConnectionString

The ConnectionString is a combination of driver and database details which helps automation tool to connect to the database. You must provide details in specified format as follows:

DRIVER=~{<DriverName>~};Server=<ServerIP/HostName,PortNumber>; Database=<DBName>;UID=<DBUsername>;PWD=<DBPassword>

Yes

String

Query

The query that needs to be executed.

Yes

String

FilePath

Enter the absolute path to the file in which you want to store the results.

Yes

String

Example:

MySQL:

DB.ExecuteDDLQueryAndStoreInFile “DRIVER=~{MySQL ODBC 5.3 ANSI Driver~};Server=192.168.24.99,1234; Database=ProductInfo;UID=Qualitia; PWD=Qualitia” "select * from productinfo.keyword where keywordid = 'c0ab6ad8f67234b'" "C:\Users\localadmin\Desktop\ProductInfo.txt"

MS SQL:

DB.ExecuteDDLQueryAndStoreInFile “DRIVER=~{SQL Server~}; Server=192.168.24.99,1234;Database=ProductInfo UID=Qualitia;PWD=Qualitia” "select * from productinfo.keyword where keywordid = 'c0ab6ad8f67234b'" "C:\Users\localadmin\Desktop\ProductInfo.txt"

DB.ExecuteDMLQueryAndStoreinKey

This action executes Data Manipulation Language (DML) queries such as update, delete and so forth and stores the query execution status into the specified key. If the query gets executed successfully, stores 0 and if the query does not get executed, stores 1.

Info

title	Prerequisite:

Before using this action, ensure that the required databases and database drivers are installed.

If the record set has more than one records, value cannot be stored under the specified key. In such cases, this action fails showing appropriate error logs in the test case execution reports.

Parameter Name

Parameter Description

Mandatory

Data Type

ConnectionString

The ConnectionString is a combination of driver and database details which helps automation tool to connect to the database. You must provide details in specified format as follows:

DRIVER=~{<DriverName>~};Server=<ServerIP/HostName,PortNumber>; Database=<DBName>;UID=<DBUsername>;PWD=<DBPassword>

Yes

String

Query

The query that needs to be executed.

Yes

String

Key

Enter the key under which you want to store the results. Key value van be retrieved using the key name.

Yes

String

Input Parameters:

Example:

MySQL:

DB.ExecuteDMLQueryAndStoreInKey “DRIVER=~{MySQL ODBC 5.3 ANSI Driver~};Server=192.168.24.99,1234; Database=ProductInfo;UID=Qualitia; PWD=Qualitia”

"select * from productinfo.keyword where keywordid = 'c0ab6ad8f67234b'" "ProductInfo"

MS SQL

DB.ExecuteDMLQueryAndStoreInKey “DRIVER=~{SQL Server~}; Server=192.168.24.99,1234;Database=ProductInfo UID=Qualitia;PWD=Qualitia”

"select * from productinfo.keyword where keywordid = 'c0ab6ad8f67234b'" "ProductInfo"

DB.ExecuteDDLQueryandStoreDatainKey

This action executes Data Definition Language (DDL) queries and stores the result data set in the specified key. In case of finding multiple data sets, this action will fail.

Info

title	Prerequisite:

Before using this action, ensure that the required databases and database drivers are installed.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

ConnectionString

The ConnectionString is a combination of driver and database details which helps automation tool to connect to the database. You must provide details in specified format as follows:

DRIVER=~{<DriverName>~};Server=<ServerIP/HostName,PortNumber>; Database=<DBName>;UID=<DBUsername>;PWD=<DBPassword>

Yes

String

Query

The query that needs to be executed.

Yes

String

Key

Enter the key under which you want to store the results. Key value van be retrieved using the key name.

Yes

String

Example:

MySQL:

DB.ExecuteDDLQueryandStoreDatainKey “DRIVER=~{MySQL ODBC 5.3 ANSI Driver~};Server=192.168.24.99,1234; Database=ProductInfo;UID=Qualitia; PWD=Qualitia”

"select * from productinfo.keyword where keywordid = 'c0ab6ad8f67234b'" "ProductInfo"

MS SQL:

DB.ExecuteDDLQueryandStoreDatainKey “DRIVER=~{SQL Server~}; Server=192.168.24.99,1234;Database=ProductInfo UID=Qualitia;PWD=Qualitia”

"select * from productinfo.keyword where keywordid = 'c0ab6ad8f67234b'" "ProductInfo"

File.CompareFileContents

This action compares two text files and validates whether content inside them is identical.

This action compares only the files with flat structures (like .csv, .txt, .json and so forth).

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
File1	Enter the absolute path to the source file from which you want to compare the content.	Yes	String
File2	Enter the absolute path to the target file with which you want to compare the source file content.	Yes	String
CaseSensitive	Enter whether you want to consider case-sensitivity when comparing content. Value for this parameter can be True or False. Set True for case-sensitive comparison. Set False for case-insensitive comparison.	Yes	String
IgnoreWhitespace	Enter whether you want to consider whitespaces when comparing file contents. Value for this parameter can be True or False. Set True if you want to consider whitespaces. Set False if you want to ignore whitespaces. Note: Only leading and trailing whitespaces will be ignored if you set this parameter to True. Whitespaces inside the content will not be considered.	Yes	Boolean

Example:

File.CompareFileContents “C:\Users\admin\Downloads\Cust_Info.xlsx” “C:\Users\admin\Downloads\Client_list.xlsx” “False” “True”

FILE.StoreStringByLineNumber

This action stores data from the specified row of the specified text file in the key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
FilePath	Enter the absolute path to the file from which you want to store data.	Yes	String
RowNumber	Enter the row number from which you want to get and store the data.	Yes	String
Key	Enter the key name in which you want to store the data.	Yes	String

Example:

FILE.StoreStringByLineNumber “C:\Users\admin\Downloads\Cust_Info” “2” “Key”

FILE.VerifyStringExistInFile

This action verifies whether the specified data exists in the specified text file.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

FilePath

Enter the absolute path to the file in which you want to verify data.

Yes

String

Data

Enter the data which you want to verify in the file.

Yes

String

CaseSensitive

Enter whether you want to consider case-sensitivity when verifying data. Value for this parameter can be True or False.

Set True for case-sensitive comparison.
Set False for case-insensitive comparison.

Yes

String

Example:

FILE.VerifyStringExistInFile “C:\Users\admin\Downloads\Cust_Info” “Qualitia” “True”

File.VerifyFileExist

This action verifies the existence of the specified file at the specified location.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
FilePath	Enter the absolute path to the file which you want to verify.	Yes	String

Example:

File.VerifyFileExist “C:\Users\admin\Downloads\Cust_List.txt”

File.VerifyFolderExist

This action verifies the existence of the specified folder at the specified location.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
FolderPath	Enter the path to the folder which you want to verify.	Yes	String

Example:

File.VerifyFolderExist “C:\Users\admin\Downloads\Cust_Info”

PDF.VerifyStringExistInPDF

This action searches specified text in the PDF file.

Prerequisite:

Before executing this action, ensure you:

Download XPDF Tools and
Add XPDF tools directory to system path environment variables.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
pdfFile	Enter the absolute path to the PDF file in which you want to find the text.	Yes	String
textToFind	Enter the text you want to find in the specified PDF file.	Yes	String

Example:

PDF.VerifyStringExistInPDF “C:\Users\Qualitia\Cust_List.pdf” “Qualitia”

PDF.VerifyStringExistInPDFPage

This action searches specified text on the specified page of the PDF file.

Prerequisite:

Before executing this action, ensure you:

Download XPDF Tools and
Add XPDF tools directory to system path environment variables.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
pdfFile	Enter the absolute path to the PDF file in which you want to find the text.	Yes	String
textToFind	Enter the text you want to find in the specified PDF file.	Yes	String
pageNumber	Enter the page number on which you want to search the specified text.	Yes	String

Example:

PDF.VerifyStringExistInPDFPage “C:\Users\Qualitia\Cust_List.pdf” “Qualitia” “2”

PDF.ComparePDF

This action compares two PDFs and validates whether content inside them is identical and stores differences in the temporary text file.

Prerequisite:

Before executing this action, ensure you:

Download XPDF Tools and
Download and install GnuWin
Add XPDF Tools and GnuWin installation directory to system path environment variables.
For example: D:\XPDF\xpdf-tools-win-4.00;C:\Program Files (x86)\GnuWin32\bin

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Pdf1	Enter the absolute path to the PDF file which you want to compare.	Yes	String
Pdf2	Enter the absolute path to the PDF file with which you want to compare the source file.	Yes	String
diffFilePath	Enter the absolute path to the text file in which you want to store the PDF comparison results.	Yes	String

Example:

PDF.ComparePDF “C:\Users\Qualitia\Cust_List.pdf” “C:\Users\Qualitia\Client_List.pdf” “C:\Users\Qualitia\Diff.txt”

XML.SetNodeValue

This action reads the specified XML file and updates the inner value of the specified node.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
fileName	Enter the absolute path to the XML file in which you want to update the value.	Yes	String
Xpath	Enter the path to the node (X Path) whose value you want to update.	Yes	String
strValue	Enter the value which you want to add in the specified node.	Yes	String

Example:

SetNodeValue XML.SetNodeValue “C:\Users\Qualitia\Cust_List.xml” “//DataSet[@ID='394502re33']/Step/Param[@ParamSeq='4']” “Qualitia Automation Studio”

XML.StoreNodeValue

This action reads the specified XML file and stores the inner value of the specified node under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
fileName	Enter the absolute path to the XML file from which you want to get and store the value.	Yes	String
Xpath	Enter the path to the node (X Path) from which you want to read and store the inner text.	Yes	String
strKey	Enter the key name under which you want to store the node value (inner text from the node).	Yes	String

Example:

XML.StoreNodeValue “C:\Users\Qualitia\Cust_List.xml” “//DataSet[@ID='106cee8f60']/Step/Param[@ParamSeq='4']” “Key”

JSON.StoreJsonString

This action reads the specified JSON file, navigates to the specified JSON path, and stores the value of the specified attribute under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
jsonFilePath	Enter the absolute path to the JSON file from which you want to store the value.	Yes	String
Jpath	Enter the path to the node (J Path) from which you want to read and store the value.	Yes	String
Index	Enter the index number which results you want to store in the specified key. Index starts from 0.	Yes	String
attributeName	Enter the attribute name whose value you want to save under the specified key.	No	String
Key	Enter the key name under which you want to store the attribute value.	Yes	String

Example:

JSON.StoreJsonString “C:\Users\Qualitia\Cust_List.json” “$.Customers.Country[0].India” “3” “Name” “Key”

JSON.UpdateJsonString

This action reads the specified JSON file, navigates to the specified JSON path, and sets the specified value to the specified attribute.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
jsonFilePath	Enter the absolute path to the JSON file in which you want to set the value.	Yes	String
Jpath	Enter the path to the node (J Path) to which you want to set the value.	Yes	String
Index	Enter the index number which results you want to set in the specified value. Index starts from 0.	Yes	Integer
attributeName	Enter the attribute name against which you want to set the value.	No	String
strValue	Enter the value which you want to set against the specified attribute.	Yes	String

Example:

JSON.UpdateJsonString “C:\Users\Qualitia\Cust_List.json” “$.Customers.Country[0].India” “3” “Company” “Qualitia”

FILE.StoreCharacterCount

This action stores the total number of characters present in the specified text file.

Line breaks are considered as characters while counting characters from the file. One line break is equal to 2 characters.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

FilePath

Enter the absolute path to the file from which you want to store characters.

Yes

String

Key

Enter the key name in which you want to store the character count.

Yes

String

IgnoreWhitespace

Enter whether you want to consider whitespaces when storing character count. Value for this parameter can be True or False.

Set True if you want to consider whitespaces.
Set False if you want to ignore whitespaces.

Note: Only leading and trailing whitespaces will be ignored if you set this parameter to True. Whitespaces inside the text will not be considered.

Yes

Boolean

Example:

FILE.StoreCharacterCount “C:\Users\admin\Downloads\Cust_Info” “Key” “True”

StoreRandomNumber

This action picks up any random number from the specified range and stores that number in the specified key. The key value can be retrieved using the key name.

Number can be duplicated, if you use this action multiple times in a single test case.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
MinNumber	Enter the minimum number.	Yes	String
MaxNumber	Enter the minimum number.	Yes	String
strKey	Enter the key name under which you want to store the random number.	Yes	String

Example:

Data.StoreRandomNumber “123” “890” “Key”

REST.ExecuteServiceRequest

This action executes the specified REST request. Qualitia gives you provision to store the response at the specified file path location in the JSON format, if required.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
URL	Enter the REST URL where you want to execute the request.	Yes	String
method	Enter method you want to execute on the specified URL.	Yes	String
authType	Enter the authentication type you want to use when executing the REST request. Qualitia supports two authentication types: Basic and NoAuth.	Yes	String
Username	Enter the username if the authentication type selected is Basic.	No	String
Pwd	Enter the password if the authentication type selected is Basic.	No	String
reqFilePath	Enter the absolute path to the file which has REST request related information in the JSON format.	No	String
resFilePath	Enter the absolute path to the file in which you want to store the REST response in the JSON format.	No	String

Example:

REST.ExecuteServiceRequest “192.122.22.34:8098/rest/ 1.0/api/qProjectMapping/project/OAT” “POST” “Basic” “john.doe@gmail.com” “john.doe@123”

“C:\Users\Qualitia\Request-Cust_List.json” “C:\Users\Qualitia\Response-Cust_List.json”

SOAP.ExecuteServiceRequest

This action executes the specified SOAP request in the specified XML file. You can also store response in the XML file, if required.

Prerequisites:

In order to execute this action, you should know how to develop request XML for SOAP operations.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
URL	Enter the API URL.	Yes	String
authType	Enter the authentication type you want to use when executing the REST request. Qualitia supports two authentication types: Basic and NoAuth.	Yes	String
Username	Enter the username if the authentication type selected is Basic.	No	String
Pwd	Enter the password if the authentication type selected is Basic.	No	String
requestType	Enter the request type you want to execute.	Yes	String
reqXMLPath	Enter the absolute path to the file which has REST request related information in the JSON format.	No	String
methodName	Enter the method name which you want to use when executing the SOAP request.	Yes	String
resXmlPath	Enter the absolute path to the XML file where the response will be stored.	Yes	String

Example:

SOAP.ExecuteServiceRequest “http://www.dnonline.com/calculator.asmx” “Basic” “Qualitia” “Qualitia” “Post” “C:\Users\localadmin\Desktop\SOAPRequest.xml” “http://abcurl.org/add” “C:\Users\localadmin\Desktop\SOAPResponse.xml”

CompareNumbers

This action compares and validates the numbers based on specified the comparison operator.

In case of not matching the expected results, Qualitia reports a defect in the execution reports.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

FirstNumber

Enter the number which you want to compare.

Yes

String

ComparisionOperator

Enter the comparison operator for the number validation. Value for this parameters can be as follows:

Use equal to (=) sign if you want to ensure whether both the values are identical.
Use lesser than (<) sign if you want to ensure that the first value is lesser than the second number.
Use greater than (>) sign if you want to ensure that the first number is greater than the second number.

Yes

String

SecondNumber

Enter the number with which you want to compare the first number.

Yes

String

Example:

CompareNumber "21" "<" "20"

ReplaceStringBySubString

This action replaces the specified part from the string with another string and stores the updated value into the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Key	Enter the key name in which you want to store the updated string.	Yes	String
String	Enter the string that you want to replace.	Yes	String
Find	Enter the part of the string that need to be replaced.	Yes	String
Replacewith	Enter the replacement text for the first string.	Yes	String
Start	Enter the start position. Default is 1. All characters before the start position will be removed.	No	String
count	Enter the number of substitutions to perform. Default is -1, which makes all possible substitutions.	No	String
Compare	Enter whether you want to consider case-sensitivity when comparing the string before replacement. Value for this parameter can be 0 or 1. Set 0 for case-insensitive comparison. Set 1 for case-sensitive comparison.	No	String

Example:

ReplaceStringBySubString "Key" "Australia" "A" "B" "1" "-1" "0"

ChangeCaseAndStore

This action changes the case of the provided string and stores the final value into the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

Key

Enter the key name in which you want to store the updated string.

Yes

String

InputString

Enter the string whose case you want to change.

Yes

String

Case

Value for this parameter can be as follows:

Set Upper to change the case of the string to upper case.
Set Lower to change the case of the string to lower case.

Yes

String

Example:

ChangeCaseAndStore "Key" "Qualitia" "Upper"

StoreFixNumber

This action stores the integer part of a specified number into the specified key. The stored key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Key	Enter the key name in which you want to store the updated string.	Yes	String
Number	Enter the number from which you want to store the integer part.	Yes	String

Example:

StoreFixNumber "Key" "6.4332"

StoreRoundNumber

This action stores values specified by the user by rounding them off to the nearest whole number. The rounded off value stored in the key can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Key	Enter the key name in which you want to store rounded value.	Yes	String
Number	Enter the number whose value you want to store into the key.	Yes	String

Example:

StoreRoundNumber "key" "6.43"

In this case, 6 will be stored into the key.

StoreRoundNumber "key" "6.55"

In this case, 7 will be stored into the key.

StoreStringToInteger

This action converts the provided string to the integer value and stores it into the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Key	Enter the key name in which you want to store integer value.	Yes	String
Number	Enter the number whose integer value you want to store into the key.	Yes	String

Example:

StoreStringToInteger "Key" "20"

StoreStringConcat

This action concatenates (combines) two strings specified by the user and stores into the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
String1	Enter the string first string.	Yes	String
String2	Enter the another string.	Yes	String
Key	Enter the key name under which you want to store the combined value.	Yes	String

Example:

StoreStringConcat "String1" "String2" "Key"

StoreMatchesFromRegExPattern

This action fetches all the matches of a regular expression pattern from an InputString and stores the array of all the matches into the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
RegExPattern	Enter the regular expression pattern.	Yes	String
InputString	Enter the data from which you want to store the element.	Yes	String
Key	Enter the key name under which you want to store the matching element.	Yes	String

Example:

StoreMatchesFromRegExPattern "Cust1(\d?)" "CustKey1 CustKey123Cust321" "Key"

Array.AddItem

This action adds the specified element in the existing array.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
ArrayKey	Enter the key that holds an array data where you want to add this additional element.	Yes	String
Element	Enter the element which you want to add into the existing array.	Yes	String

Example:

Array.AddItem "ArrayKey" "Sunday"

Array.DeleteItem

This action deletes the specified element from an existing array.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
ArrayKey	Enter the key that holds an array data from where you want to remove the element.	Yes	String
Index	Enter the index of an element which you want to remove.	Yes	Integer

Example:
Array.DeleteItem "ArrayKey" "2"

Array.IsArray

This action verifies whether the specified data is in the array form. If the data is not an array, reports a defect in the execution report.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
ArrayKey	Enter the key that holds an array data which you want to verify.	Yes	String

Example:

Array.IsArray "ArrayKey"

Array.JoinArrayAndStore

This action joins the substrings from an existing array and stores them into the specified key. By default, these substrings are separated by the caret sign (^). The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
ArrayKey	Enter the key that holds an array data which you want to join.	Yes	String
Key	Enter the key name under which you want to store the joined array.	Yes	String

Example:

Array.JoinArrayAndStore "ArrayKey" "Key"

Array.Reverse

This action reverses the existing sequence of data given in an array.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
ArrayKey	Enter the key that holds an array data which you want to modify the sequence of.	Yes	String

Example:
Array.Reverse "ArrayKey"

Array.Sort

This action sorts the existing array data in an ascending order.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
ArrayKey	Enter the key that holds an array data which you want to sort in an ascending order.	Yes	String

Example:
Array.Sort "ArrayKey"

Array.StoreArrayLength

This action stores the length of an existing array into the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
ArrayKey	Enter the key that holds an array data whose length you want to store.	Yes	String
Key	Enter the key name under which you want to store the array length.	Yes	String

Example:

Array.StoreArrayLength "ArrayKey" "Key"

Array.StoreElementByIndex

This action stores the element from the specified index of an array into the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
ArrayKey	Enter the key that holds an array data from which you want to store the element.	Yes	String
Index	Enter the index of the element which you want to store.	Yes	Integer
Key	Enter the key name under which you want to store the element.	Yes	String

Example:
Array.StoreElementByIndex "ArrayKey" "5" "Key"

Array.StoreElementIndex

This action stores the index of the specified element from an existing array into the specified key. The key value can be retrieved using the key name.
Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
ArrayKey	Enter the key that holds an array data from which you want to store the element index.	Yes	String
Element	Enter the element which you want to store.	Yes	String
Occurrence	Enter the number of occurrence from the array which you want to store.	Yes	String
CaseSensitive	Enter whether you want to consider case-sensitivity when comparing content. Value for this parameter can be True or False. Set True for case-sensitive comparison. Set False for case-insensitive comparison.	Yes	String
Key	Enter the key name under which you want to store the index of an element.	Yes	String

Example:

Array.StoreElementIndex "ArrayKey" "Sunday" "1" "True" "Key"

Array.VerifyElementExist

This action verifies whether the specified item exists in an array and reports a defect in case of not finding the specified item.

Input Parameters:

Parameter Name

Parameter Description

Mandatory

Data Type

ArrayKey

Enter the key that holds an array data from which you want to verify the element.

Yes

String

Element

Enter the element which you want to verify.

Yes

String

CaseSensitive

Enter whether you want to consider case-sensitivity when comparing content. Value for this parameter can be True or False.

Set True for case-sensitive comparison.
Set False for case-insensitive comparison.

Yes

String

Example:
Array.VerifyElementExists "ArrayKey" "Sunday" "True"

LeftTrimAndStore

This action removes or trims the blank spaces existing at the extreme left side of the specified string and stores the value under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
InputString	Enter the string from which you want to trim the blank space.	Yes	String
Key	Enter the key name under which you want to store the final value.	Yes	String

Example:

LeftTrimAndStore " John and family" "Key"

In this case, the John and family will be stored under key. The blank space before john will be removed.

RightTrimAndStore

This action removes or trims the blank spaces existing at the extreme right side of the specified string and stores the value under the specified key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
InputString	Enter the string from which you want to trim the blank space.	Yes	String
Key	Enter the key name under which you want to store the final value.	Yes	String

Example:

RightTrimAndStore "John and family " "Key"

In this case, the John and family will be stored under key. The blank space after john and family will be removed.

StoreAbsoluteValue

This action stores the absolute value of the specified number under the key name. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Integer	Enter the integer whose absolute value you want to store.	Yes	String
Key	Enter the key name under which you want to store the absolute value.	Yes	String

Example:

StoreAbsoluteValue "-3.6" "Key"

In this case, the 3.6 will be stored under key.

StoreIntegerSign

This action stores an integer that indicates sign of the number specified in the parameter. The key value can be retrieved using the key name.

If number is greater than 0, stores 1.
If number is equal to 0, stores 0.
If number is lesser than 0, stores -1.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Number	Enter the number whose integer value you want to store.	Yes	Integer
Key	Enter the key name under which you want to store the integer value.	Yes	String

Example:

StoreIntegerSign "-12" "Key"

In this case, the -1 will be stored under key because the number is lesser than 0.

StoreSqRoot

This action stores the square root of the specified number under the key. The stored key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Number	Enter the number whose square root you want to store.	Yes	Integer
Key	Enter the key name under which you want to store the square root.	Yes	String

Example:

StoreSqRoot "144" "Key"

In this case, the 12 will be stored under key.

StoreStringFromLeft

This action stores the specified number of characters from the left side of the given string. The key value can be retrieved using the key name.

Enter 0 if you want to store the empty string.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
InputString	Enter the input string from which you want to store the characters.	Yes	String
Length	Specify the number of characters you want to store under the key name. Enter 0 if you want to store an empty string.	Yes	Integer
Key	Enter the key name under which you want to store the specified number of characters.	Yes	String

Example:

StoreStringFromLeft "John Doe" "4" "Key"

In this case, the first four characters i.e. Jonn will be stored under the key name.

StoreStringFromRight

This action stores the specified number of characters from the right side of the given string. The stored key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
InputString	Enter the input string from which you want to store the characters.	Yes	String
Length	Specify the number of characters you want to store under the key name. Enter 0 if you want to store an empty string.	Yes	Integer
Key	Enter the key name under which you want to store the specified number of characters.	Yes	String

Example:

StoreStringFromRight "John Doe" "3" "Key"

In this case, the last three characters i.e. Doe will be stored under the key name.

StoreRandomString

This action generates and stores any random string of the specified length into the key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Key	Enter the key name under which you want to store the random text.	Yes	String
Length	Specify the number of characters of the string you want to generate and store under the key name.	Yes	Integer

Example:

StoreRandomString "Key" "23"

StoreRandomAlphanumericString

This action generates and stores any random alphanumeric string of the specified length into the key. The key value can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Key	Enter the key name under which you want to store the random text.	Yes	String
Length	Specify the number of characters of the string you want to generate and store under the key name.	Yes	Integer

Example:

StoreRandomAlphanumericString "Key" "33"

LaunchApplication

This action runs the application or file from the specified path.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
filePath	Enter the absolute path of the application or file which you want to run or open.	Yes	String
AppParameters	If the filePath contains path to the executable file, enter the argument here to specify any parameters to be passed while opening the file.	No	String
AppDirectoryPath	Enter the directory of the application or executable file.	No	String
Operation	Specify the operation to performe after opening the application. You can specify following operations: Open-Opens the specified file or application. This can be an executable file or folder as well. Edit-Launches the application or file in the edit mode. Explore-Explores the folder which is specified in the filePath parameter. Find-Initiates the search operation from the specified folder path. Print-Prints the file specified in the filePath parameter. This action fails in case the file is not printable. Default value is Open.	No	String
Mode	Enter the mode of the application or file to open. You can specify the integer value from the list below to open application in corresponding mode. Enter, 0 to hide the window. 1 to activate and display the window of the application or file which is launched. 2 to open the application window in minimize mode. 3 to open the application window in maximize mode. 4 to open the application window in its most recent size and position. 5 to open the application window in its current size and position. 6 to minimize the specified window and activate the next top-level window in the Z order. 7 to display the window as a minimized window. 8 to displays the window in its current state. 9 to activate and display the window. If the window is minimized or maximized, the system restores it into its original size and position. 10 to Set the show-state based on the state of the program that started the application. Default value is 1.	No	Integer

Example:

LaunchApplication "C:\Application.exe"

TypeKey

This action simulates the keystroke events specified into the parameter.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Key	Enter the keys which you want to simulate.	Yes	String

This action supports following keystrokes:

To press	Enter
tab key	"Tab"
enter key	"Enter"
F1 key	"F1"
F2 key	"F2"
F3 key	"F3"
F4 key	"F4"
F5 key	"F5"
F6 key	"F6"
F7 key	"F7"
F8 key	"F8"
F9 key	"F9"
F10 key	"F10"
F11 key	"F11"
F12 key	"F13"
space key	"Space"
CapsLock key	"CapsLock"
delete key	"Delete"
down arrow key	"Down"
up arrow key	"Up"
right arrow key	"Right"
left arrow key	"Left"
end key	"End"
home key	"Home"
page down key	"Page_Down"
page up key	"Page_Up"
shift key	"Shift"

Example:

TypeKey "Enter"

TypeString

This action simulates the keyboard inputs specified into the parameters.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Text	Enter the string which you want to type.	Yes	String

Example:

TypeString "qualitiasoft.com"

Clipboard.Copy

This action copies the data given into the parameter to clipboard.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Text	Enter the text to add to the clipboard memory.	Yes	String

Example:

Clipboard.Copy "Qualitia Software Pvt. Ltd."

StoreClipboardData

This action stores the data present on the clipboard into the specified key. The key value then can be retrieved using the key name.

Input Parameters:

Parameter Name	Parameter Description	Mandatory	Data Type
Key	Enter the key name under which you want to store the data. The key value then can be retrieved using the key name.	Yes	String

Example:

StoreClipboardData "key"

Clipboard.Clear

This action clears the data present on the clipboard memory.

This action does not have any input parameters.

Example:

Clipboard.Clear

Page Comparison

Versions Compared

Old Version 38

New Version 39

Key

OpenFirefoxBrowser

OpenIEBrowser

CloseAllOpenedFirefoxBrowsers

CloseAllOpenedIEBrowsers

ExitSuite

ExitTask

ExitTCIteration

ComparePattern

CompareString

DoubleClick

OpenURL

CalculateDifferenceInDateAndStore

CloseApplication

CompareTabularResults

ComputeExpression

ExecuteDDLQueryAndStoreInFile

ExecuteDMLQueryAndStoreInKey

ExecuteFile

IsArraySorted

NavigateFireFoxBrowser

NavigateIEBrowser

OpenApplication

OpenSAPApplication

PressKey

ReplaceAndStoreText

RestJsonResp

SAPAutoLogon

SAPAutoLogonByIP

SAPAutoLogonByTargetSystem

SAPCloseConnections

SAPOpenConnection

SAPOpenConnectionByIP

SAPOpenConnectionByTargetSystem

SAPStartBPCATracing

SAPStopBPCATracing

SecureStoreVariable

StoreArrayItem

StoreObjectInstanceCount

StoreSplitString

StoreStringLength

StoreSubString

StoreVariable

TrimAndStoreText

VerifyDataType

VerifyDifference

VerifyStringContainsValue

WaitFor

WriteLog

WriteTextToFile

EXCEL.StoreCellData

EXCEL.WriteToRow

EXCEL.WriteToColumn

EXCEL.StoreColumnCount

EXCEL.StoreRowCount

EXCEL.StoreColumnDataOccurance

EXCEL.StoreCellText

Excel.StoreCellDataFromFile

IMAGE.CompareTwoImages

Date.StoreModifiedDate

Date.ChangeDateFormat

DB.ExecuteDDLQueryAndStoreInFile

DB.ExecuteDMLQueryAndStoreinKey

DB.ExecuteDDLQueryandStoreDatainKey

File.CompareFileContents

FILE.StoreStringByLineNumber

FILE.VerifyStringExistInFile

File.VerifyFileExist

File.VerifyFolderExist

PDF.VerifyStringExistInPDF

PDF.VerifyStringExistInPDFPage

PDF.ComparePDF

XML.SetNodeValue

XML.StoreNodeValue

JSON.StoreJsonString

JSON.UpdateJsonString