DownloadFile
This action clicks the link/element which will populate a download window, and then downloads the file.
The action supports and is explicitly tested for FF3, IE7, IE8. The action will not wait till the file is downloaded, this have to be handle externally by the user.
This action requires AutoIt to be installed.
- Install AutoIT from the location http://www.autoitscript.com/site/autoit/downloads/
- Click on Download AutoIt v3.
- Choose full installation.
- After the set up is completed, AutoIT installation path should be set against the Qualitia's configfile key "AutoITPath"
Input Parameters:
Parameter Name
Parameter Description
Mandatory
Data Type
folderName
The path where the file is to be download. Please check Table 1 "Parameter Mandate" to validate in the situation where this parameter will be mandatory. In case the parameter Mandatory; the user should take care that the folder path exists. The action does not validates whether the folder exist
Yes
String
Filename
The filename of the downloadable file, to be given incase the user requires to give specific name and not depend on the default name of the file. In case, the file already exist, similar window like below will appear. Such windows are not handled by the action. Incase, the user does not provide this data, the action will pick the default file name available while download. This parameter is not mandatory
Yes
String
| title | Important Notes: |
|---|
Because of this IE restriction, the download window will not appear, leading to unexpected behavior. To avoid this, please follow the settings below: 1. From Internet Explorer, click Tools, and then click Internet Options. The Internet Options dialog box appears. 2. Click the Security tab. The Internet Options dialog box shows your security levels and zones. 3. Select the Internet zone, and then click Custom Level. The Security Settings dialog box file downloads.
For further details, please check: http://msdn.microsoft.com/en-us/library/dd565669
2. When a download window is populated, the following window will also exist.
Please make sure to check the checkbox "Close this dialog when download completes". Usually, the checkbox is checked by default. If not, please check it manually once. Qualitia action "DownloadFile" does not handle this window. The execution will not be hampered by this, but it's just that unwanted window will be open.
Important Notes for Firefox: Firefox uses the default Firefox instance:-
Above will be the default download setting for the default firefox instance. Hence, according to the setting the files will be downloading into the predefined location, here its "Desktop". During execution, the action will select "Save file" from a window similar to below and accordingly the file will be downloaded to desktop by firefox.
Table 1: Parameter Mandate
Browser
locator
folderPath
fileName
Internet Explorer
Mandatory
Mandatory
Not mandatory
Above is the default download setting in the default Firefox instance invoke my Selenium.
Mandatory
Mandatory
Not mandatory
DownloadFile "C:/ProgramData" "Qualitia"
Note:This action is tested on IE8,FF& chrome. This action is not supported on IE9,IE10,chrome<16.
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|
On this page:
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
VerifyExistence
This action verifies the existence of the specified object.
Input Parameters:
Parameter Name
Parameter Description
Mandatory
Data Type
existence
Data type of this parameter is can be true or false.
If True – checks if the page exists
If False – checks if the page does not exist
Yes
TRUE
Example:
VerifyExistence "True"
VerifyVisibility
This action verifies the visibility of the specified object.
Input Parameters:
Parameter Name
Parameter Description
Mandatory
visibility
Data type of this parameter is can be true or false.
If True – checks if the page is visible
If False – checks if the page is not visible
Yes
String
Example
VerifyVisibility "True"
Click
This action clicks the specified object
Example:
Click
StorePropertyValue
This action stores the property value of the specified object against a key name. The stored value can be retrieved by using the key name.
Input Parameters:
Parameter Name
Parameter Description
Mandatory
Data Type
key
Variable in which the property value will be stored
Yes
String
Property
Property/attribute name of the object whose value needs to be stored.
This can be any apt attribute of that html object.
This action also supports "text" as the property. "Text" property will retrieve the inner text of an element.
Yes
String
Example:
StorePropertyValue "value" "name"
MouseOver
This action simulates the user hovering mouse over the specified object.
Example:
MouseOver
MouseDown
This action simulates user pressing the left mouse button at the specified location.
Input Parameters:
Parameter Name
Parameter Description
Mandatory
Data Type
X
The x-coordinate to click.
Yes
String
Y
The Y-coordinate to click.
Yes
String
Example:
MouseDown "5" "10"
MouseUp
This action simulates the event that occurs when the user releases the mouse button.
Input Parameters:
Parameter Name
Parameter Description
Mandatory
Data Type
X
The x-coordinate to click.
Yes
String
Y
The Y-coordinate to click.
Yes
String
Example:
MouseUp "50" "38"
ClickAt
This action clicks at the particular point on the object.
Input Parameters:
Parameter Name
Parameter Description
Mandatory
Data Type
X
The x-coordinate to click.
Yes
String
Y
The Y-coordinate to click.
Yes
String
Example:
ClickAt "60" "67"
SetFocus
This action moves the focus to the specified web element.
Example:
SetFocus
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|
| Multiexcerpt macro | ||
|---|---|---|
| ||
DoubleClickThis action double-clicks the particular web element. Example: |
| Multiexcerpt macro | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
RightClickThis action right-clicks the specified web element. Input Parameters:
Example: This will select the third option from the context-menu. |
WaitForObject
This action waits for the object to exist or not exist for the maximum no of seconds specified.
If the object is found or not found before the maximum time specified, the action shall stop waiting.
If the wait time is "" then the wait time shall be the "Sync Time" time set on the Qualitia Configuration (Execution) window.
Input Parameters:
Parameter Name
Parameter Description
Mandatory
Data Type
waitTime
The maximum no of seconds to wait for the object to exist or not exist
This has to be 0 ,"",or a positive integer value
Yes
String
existence
Boolean value to specify if the object should exist or not.
Yes
String
Example
WaitForObject "10" "true"
The action shall wait for maximum 10 seconds for the object to exist. If the object exists before 10 seconds elapses, the wait shall be over.
WaitForObject "15" "False"
The action shall wait for maximum 15 seconds for the object not to exist. If the object does not exist before 15 seconds elapses, the wait shall be over.
ClickAndWait
This action clicks the page object and waits.It waits for the maximum sync time set in the Qualitia Configuration (Execution) window for key Sync Time. If the page page loads before the maximum sync time, then the action will stop waiting.
Example:
ClickAndWait
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|
| Multiexcerpt macro | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||
DragAndDropThis action drags and drops the specified web element at the specified location. Input Parameters:
Example: |
100" "500" |
StoreExistence
This action stores the existence of an object under the specified key. The key value can be retrieved using the key name.
Input Parameters:
Parameter Name
Parameter Description
Mandatory
Data Type
Key
The variable in which the existence (true/false) of the object is stored.
Yes
String
Example:
StoreExistence "Key"
StoreChildCount
This action stores the child count of the specified object under the key name. The key value can be retrieved using the key name.
Input Parameters:
Parameter Name
Parameter Description
Mandatory
Data Type
Key
The variable in which the child count will be saved.
Yes
String
Example:
StoreChildCount "Key"
ScrollIntoView
This action scrolls to view the specified object.
This action does not have any parameters.
Example:
ScrollIntoView
| Insert excerpt | WebButton Actions | WebButton Actions | nopanel | true|
|---|---|---|---|---|
| Multiexcerpt include macro | ||||
|
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|
| Multiexcerpt include macro | ||||
|---|---|---|---|---|
|